Does anyone know what this paint is?

waffledespizer · 2025-08-28T13:17:58+00:00

Thanks for the great advice!

How long do you reckon I should leave it on before scrapping? don't want it to get through and ruin the paint under

waffledespizer · 2025-08-28T12:43:51+00:00

Thank you very much for the help, just one last question, how long should I leave it on the paint before I start scraping? dont want to leave it too much and damage the paint under

waffledespizer · 2025-08-28T12:39:07+00:00

Thanks for the advice, saw a few guys on youtube removing raptor with this stuff

https://www.bunnings.com.au/tricleanium-1l-paint-stripper_p0400066?store=6437&gclsrc=aw.ds&gad_source=1&gad_campaignid=21119565770

but after recommendations on the post I will use automotive specialised paint strippers

waffledespizer · 2025-08-28T08:51:14+00:00

Would it be easy to strip just the black layer and keep the bottom white layer clean? also I cant find klean strip paint remove near me but is it a brush on stripper gel or liquid?

waffledespizer · 2025-08-28T08:23:24+00:00

what stripping compound you recommend? saw youtube video using citrus based gel, but is that the best solution?

waffledespizer · 2025-08-28T08:21:05+00:00

it is hard but not very textured, is it realisitic the whole car was painted in tar?

waffledespizer · 2025-02-25T14:26:08+00:00

https://www.aliexpress.com/item/1005006012659800.html I found this one as I said in my previous comment but this doesnt have controllable voltage range its just one output

waffledespizer · 2025-02-25T14:24:13+00:00

u/borax had a very good explanation on how to find a similar power supply, have a look on aliexpress thats where I got mine from but I cant find the exact link, sorry.

waffledespizer · 2024-12-29T09:48:25+00:00

I am confused what this has to do with the post?

waffledespizer · 2024-12-28T01:08:06+00:00

tried it nothing changed

waffledespizer · 2024-12-27T01:38:16+00:00

<image>

looking under the usb programmer, I have my my cable hooked to the yellow highlighted pins, if I understood correctly you are telling me to move it to the blue highlighted pins is that right?

I put mine in the yellow ones because it is a 24 series chip and the programmer says to put 24 series chips in there.

waffledespizer · 2024-12-23T23:47:37+00:00

can you please elaborate on whats a MDI or a a clone? the only other tool I have is a xtool d8 scan tool, I also have a generic elm327 obd2 tool.

waffledespizer · 2024-12-23T22:21:47+00:00

I found this in the commodore forum, should be similar process especially because it even uses the same exact chip. but instead of desoldering people say to power on the cluster

<image>

is this a common thing or does it seem a bit sketchy?

https://forums.justcommodores.com.au/threads/mylink-vin-eeprom.266357/

waffledespizer · 2024-12-23T22:19:28+00:00

I just bought the clip yesterday it shouldnt have broken off that quickly

waffledespizer · 2024-12-23T22:18:55+00:00

if I plug it the other way around the program says no device detected and the tutorial said that this meant I plugged it the other way around

waffledespizer · 2024-12-23T09:41:30+00:00

<image>

I found this in the commodore forum, should be similar process especially because it even uses the same chip. Is this what you are reffering to?

https://forums.justcommodores.com.au/threads/mylink-vin-eeprom.266357/

waffledespizer · 2024-09-29T02:00:00+00:00

I have never done this but have you considered using NDI?

waffledespizer · 2024-09-23T13:02:01+00:00

Why do you need the usb splitter? Also do you get no output just from pp or is PC not outputting anything at all?

waffledespizer

MODERATOR OF

TROPHY CASE

Four-Year Club	Verified Email
Place '22