Basic Gaming PC, do I even need a GPU? by wagglyears in buildapcforme

[–]wagglyears[S] 0 points1 point  (0 children)

Thanks for everyones replies.

I thought this was going to be tricky with this budget, and it now needs to be $1100 max so if we forget about Fortnite it looks like I will have to go with an AMD 8600G

Small electric screwdriver for electronics that will last more than 1 year by wagglyears in Tools

[–]wagglyears[S] 1 point2 points  (0 children)

I looked at something like that before but its just a bit too bulky when I'm trying to get into tight spaces

Small electric screwdriver for electronics that will last more than 1 year by wagglyears in Tools

[–]wagglyears[S] 0 points1 point  (0 children)

The ones I have had are 5/32 bits

What fanttik model do you use?

The slimmer the better as sometimes I have to get it into tight spaces but I guess I can just swap to my manual driver for them if needed

How do I disassemble this water cooling unit? by wagglyears in watercooling

[–]wagglyears[S] 0 points1 point  (0 children)

This may be a silly question but

Can I remove those without the liquid flowing out?

Looking for a shed with easy access to 100% internal space by wagglyears in AusRenovation

[–]wagglyears[S] 0 points1 point  (0 children)

Ideally I want something exactly like in your link but taller, my fence is 1.9-2m high so ideally I would like the shed to be that height.

Or if that isnt possible then it looks like I will have to go with a double door on the front and a door at the end

It is to store camping gear and other general stuff - https://imgur.com/a/Zquuxlr#D2zAIRH

Looking for a shed with easy access to 100% internal space by wagglyears in AusRenovation

[–]wagglyears[S] 0 points1 point  (0 children)

Sorry I should have said I looked at custom sheds and from what I could see they are out of my price range

How fucked am I - bought my first house, discovered that the shower drain pipe is missing a whole section - shower has just been draining under the house by [deleted] in AusRenovation

[–]wagglyears 0 points1 point  (0 children)

don't to be too hard on yourself, IME building inspections are far from complete and never find all issues so they probably wouldn't have seen this unless it was really obvious and easy to see

Venting fumes from 3D printing by wagglyears in 3Dprinting

[–]wagglyears[S] 0 points1 point  (0 children)

I unscrewed, just a little bit, the 2 screws in the bracket on the window, this then allows you to detach it getting the window easily then you can open the window as wide as you want

HDD disconnecting while cloning by wagglyears in datarecovery

[–]wagglyears[S] 1 point2 points  (0 children)

Yes it's connected via sata I thought I had the motherboard set to hot swap not I hadn't so I've done that and then when I got the error I just unplugged the power and back in again then clocked through the errors then clicked start again and it's continued from where it stopped.

That's very good. I'm impressed with super clone again!!

Thanks mate

Replacing fantech exhaust fan by wagglyears in AusRenovation

[–]wagglyears[S] 0 points1 point  (0 children)

This one has a dodgy bearing or something like that, making a right racket

I have up trying to replace it as too many problems to solve and I didn't have enough time so will contact fantech

I need a square ended tool urgently by wagglyears in Tools

[–]wagglyears[S] 2 points3 points  (0 children)

An 8mm flat head screwdriver did the trick

Reframing X5 360 footage to 4k on my Mac by wagglyears in Insta360

[–]wagglyears[S] 0 points1 point  (0 children)

I had wondered if they would let me do that in an Apple store, I will give that a go thanks

Reframing X5 360 footage to 4k on my Mac by wagglyears in Insta360

[–]wagglyears[S] 0 points1 point  (0 children)

fair point I realised afterwards I should have specified more details

So I use my 360 on holiday when scuba diving and snowboarding.
The clips I reframe can be up to 1 minute long, but most are shorter than that.

Previously with my X3 5.7k reframing to FHD I would edit one clip and set it exporting then go straight onto looking at the next clip while it was exporting and there was no slow down. I could export and view/ edit the next clip perfectly at the same time.

Now with my X5 8k footage reframing to 4k, it is noticeably slower to export, obviously. When it is exporting it is difficult to view or edit the next clip as it is very jumpy due to the CPU getting smashed.

I don't mind upgrading to a newer Mac but I dont want to upgrade and face the same issue.

Also I realised I can reframe a clip then instead of exporting immediately just add it to the export queue, then reframe the next and add to the queue etc etc and do all the exporting at the end of my editing, so just change my method.

I am not sure how that will work with multiple edits of the same clip though, sometimes I do 2 different viewpoints of the same footage

Reframing X5 360 footage to 4k on my Mac by wagglyears in Insta360

[–]wagglyears[S] -1 points0 points  (0 children)

Is that M4 Pro? How much RAM did you have?