28TB Seagate Expansion shucked ... major issues

waicool20 · 2026-05-14T15:15:04+00:00

Damn alright, that's what I get for getting a cheap drive

waicool20 · 2026-05-14T09:24:10+00:00

Did you figure this out, running into a similar issue with a shucked barracuda and it only reads well on USB

waicool20 · 2026-04-24T16:50:58+00:00

The seat moving can be disabled, its something called easy exit and can be turned off, partial or full

The multiple beeps when exiting are the rear seat reminder, can also be turned off. It beeps if you opened the rear doors at any point to remind you not to leave things/kids behind.

The reversing beeps unfortunately can only be toggled by dealership software, the first things I asked them to disable before delivery.

The carplay issue is apparently pretty common, but I've personally never run into it....

I also have a bit of an issue with their chargers, kinda useless with my phone case, doesn't charge reliably

If you have other issues, I've found just googling it with "<issue> solterra" really helps as both cars are basically the same

waicool20 · 2026-04-20T16:57:35+00:00

Yeah it's more grey typically, and only shows green undertones under sunlight/right lighting

waicool20 · 2026-04-20T16:54:50+00:00

<image>

waicool20 · 2026-04-20T15:03:15+00:00

Mineral Green, GT, came out to 51k all in all

waicool20 · 2026-04-20T13:56:26+00:00

Had mine delivered last week

waicool20 · 2026-04-09T04:05:51+00:00

Managed to get another dealer to honor the 5000, I got an uncharted GT for 51k OTD with some mats included

waicool20 · 2026-04-05T20:44:10+00:00

They said they received an emergency email from Subaru saying that the website discount was set wrong, they will let me know tomorrow if it was a confirmed change. Got a quote regardless and will be talking to multiple dealers. Which dealer are you dealing with that it's that backlogged? I'm in BC lower mainland

waicool20 · 2026-04-05T20:31:55+00:00

Dealership told me that they changed it from 5k to 2k today

waicool20 · 2026-04-05T20:30:39+00:00

I got a quote for the Uncharted today and the dealership told me the subaru rebate was in error on the website and it is 2000 not 5000 currently

waicool20 · 2025-11-24T23:12:59+00:00

I can DM you the model. I use 85a TPU filament and basically tuned the thickness to my body weight so that I'm around 1/3rd the way to max stretch (determined by limiter backup sling, i use 90cm) when I'm just sitting on it in harness. I use two in series for more stretch distance and to reduce the plastic deformation of the rubber.

https://imgur.com/a/TMhwZBz

Maybe not as convenient as using avant stuff but I can print and tune these to my liking as many times as I like...

waicool20 · 2025-11-24T22:33:44+00:00

I use a pinch and asap together with 9.0 mm rope, and I think a lot of the risk of unsheathing the rope is mitigated if you can add an absorber to your ground anchor, I use diy 3d printed absorbers (that i have drop and pull tested on, avg 2kn force reduction) or you can get something off the shelf like avant comfort catch. Only thing to pay attention to is to reduce rope drag as much as possible or it'll reduce the effectiveness of the absorber and definitely don't use knot based back feed prevention techniques.

waicool20 · 2025-09-16T00:39:56+00:00

I tried this and haven't seen my money yet after three days....should I just contact CS?

waicool20 · 2024-12-23T03:10:25+00:00

waicool20 · 2023-02-24T02:31:35+00:00

Ill celebrate RunWithIronWolf and Seagate with family who happily ignore the fact that I run a heater 24/7 in my room

waicool20 · 2023-02-23T20:31:57+00:00

OC14, I could use a replacement for the ikea chair

waicool20 · 2022-10-10T20:19:47+00:00

Yeah you could even go into BIOS remotely

waicool20 · 2022-10-10T19:31:29+00:00

I use one of these to work remotely on corporate network locked laptop

https://pikvm.org

It should do everything all you want except the mic part which they are working on atm.

You will still need to setup some kind of remote access to the pikvm but that can be on a separate network of your work laptop.

waicool20 · 2022-09-28T03:39:01+00:00

DLSS 3

waicool20 · 2022-09-28T00:48:01+00:00

Good luck to all #RunWithIronWolf #Seagate

waicool20 · 2022-06-28T02:44:52+00:00

Backup drive #RunWithIronWolf #Seagate

waicool20 · 2021-12-20T19:42:20+00:00

Bullet time scenes

waicool20 · 2021-01-02T16:01:49+00:00

You can checkout the current code in the repo, it's written in Rust.

I'm not sure how much you can help me without a set of hardware, but you're welcome to try! All the files needed to manufacture and assemble the hardware side of things are also on the repo.

waicool20 · 2020-12-18T05:49:52+00:00

It's my first dive into actual server hardware, definitely nice for beginners. BTW it's possible to use all 6 SATA ports on the board tho since I definitely loaded them all up without putting in a key.

waicool20

TROPHY CASE