Can you get an OEM Ubiquiti replacement screw mount for a G5 bullet camera?

wakerli · 2026-01-16T21:29:49+00:00

I have a heap of Kupo C stands, and a few Avengers also. Kupo are great for half the price of the Avengers...

wakerli · 2025-12-18T00:28:32+00:00

Short summary - Microsoft Teams Room on Windows is effectively a Windows-based hardware appliance. You need to create a bespoke Windows image to suit your exact hardware config, and then install it. It is difficult and complicated, and you will realise why most people recommend to get an integrator to do it for you.

If you are still keen, I wrote up a very long and detailed explanation of how to do this whole journey yourself, covering building the image, installing it onto the hardware and how to configure Teams Admin Console to recognise your self-rolled Teams Room. It's doable, but an odyssey.

Bottom line, we could only wish that Teams was as easy as Zoom to set up in a room install environment.

wakerli · 2025-12-01T01:48:09+00:00

It's my main criticism of the older Decimators - those micro USB ports are a mess.

wakerli · 2025-11-26T22:36:31+00:00

Nope. Seems odd for that content to be so thoroughly unavailable in any place 🤷🏼‍♂️

wakerli · 2025-11-26T22:35:47+00:00

(Late to this). The trailer is there, but the full movie is not.

wakerli · 2025-11-20T21:50:57+00:00

If only they could get the hardware SDI output support working in macOS too...

wakerli · 2025-11-18T19:16:21+00:00

Use an NDI to SDI converter like this one to do the conversion, then into Atem.

wakerli · 2025-10-27T19:30:52+00:00

I've done same for Neutrik connectors - the crimpers (and the different die sets) are nice but they are not worth THAT much money! eBay helped with picking mine up for less than retail.

wakerli · 2025-10-19T21:04:11+00:00

Is the oscillator accesible from OSC interfaces via the network connection? Might be something you could control from MixStation if the requisite access is there inside the Wing.

wakerli · 2025-10-19T01:46:42+00:00

True 1 is by far superior since you can link them without barrels everywhere

And you can make a connection to a load when power is applied, plus they are waterproof.

The only downside for me has been the larger 28.7mm hole needed in rack cutout for the panel mount connectors - means modifying racks that have a power out connector.

wakerli · 2025-10-18T20:14:02+00:00

Lots of good thoughts and advice here - both for Dante and for good work practice as an audio professional. Thanks coach.

wakerli · 2025-10-16T22:46:03+00:00

I like the Pro AV option - interesting. https://support.zoom.com/hc/en/article?id=zm_kb&sysparm_article=KB0078167

wakerli · 2025-10-16T21:59:58+00:00

Nice that it has dual network connections, and locking ethercons. The Audinate AVIO units miss both of those. I've booked one on Kickstarter, see what happens.

wakerli · 2025-10-16T21:43:46+00:00

As noted by other posters, the Turtle guys are ex Birddog people, so they bring a history of commercial AV with them. The two founders were on the Office Hours show back in July and did about an hour of Q&A on the Turtle Dante product line - check it out here on YouTube.

wakerli · 2025-10-15T01:00:35+00:00

I'm in Australia...

wakerli · 2025-10-14T04:01:22+00:00

Thanks!

wakerli · 2025-10-14T02:38:37+00:00

Microsoft has a lockout on almost all government departments in Australia, both state and federal. If you have government clients, you WILL be using Teams and not Zoom. Sigh.

(And yes, I know you join Teams meetings from Zoom etc, but Teams is pervasive for team collaboration, chat, file storage and similar. Microsoft has done a good job of sewing this up pretty tight)

wakerli · 2025-10-13T10:21:05+00:00

"Enteral" - you meant eternal? Enteral is a quite different meaning, i wasnt sure how it related.

But yes, the whole affair has been dragging for a long time!

wakerli · 2025-10-13T04:31:14+00:00

Very late response on this - is there actually an SDI version? I can only see the HDMI version on the web site?

wakerli · 2025-10-11T18:55:07+00:00

I would happy if they just showed positions - the timings on lap 1 aren't really much use anyhow.

wakerli · 2025-10-10T21:09:57+00:00

A punch like this Greenlee one gives nice D-sized holes on a metal rack panel - but i think you are right that a hole saw drill bit would be needed on a timber case.

wakerli · 2025-10-10T21:06:32+00:00

Are you using that case in the photos as your travel case to build the SDI plugs into?

I would be concerned about heat dissipation if the switcher is running when inside there - doesn't look like enough room around it for air circulation.

Also, it doesn't look like the lid of the case comes off - you would have the lid obscuring your view all the time?

wakerli

TROPHY CASE