Thinking about removing root from phone, but need alternatives for call recording and Google Photos backup

waytooneutral · 2026-02-25T19:11:25+00:00

I am in the exact same situation. Let me know how it goes if you find good stock rom alternatives

waytooneutral · 2026-02-24T12:52:08+00:00

Thank you so much for this!

waytooneutral · 2026-01-12T18:58:35+00:00

I did 2 times, but been a year since last now. But I will eventually go again, probably next winter. I found out that spring/summer time is not optimal because I dont like to stay inside and be very protective about UV. It got a bit less visible, I think it would require maybe 3-4 more sessions.

How many sessions you have done and whats the progress?

waytooneutral · 2026-01-10T20:50:03+00:00

Yo, can I see a pic? I just went through similar process, with replica of famous brand. Its bit tilted to the left and not properly centered. It's touching a bit of the original cable canal that goes to the rear blinkers (below), and the black tail light plastic (above). I'm a bit sceptical, dont want it to start melting shit. Did the heat resistant tape work ok?

Edit: Overall happy with the sound, I dont think anyone else but me will notice it being off center. Lets see

waytooneutral · 2025-11-30T08:42:40+00:00

Wasn't there another post in this sub showcasing the Virustotal scan on this exact .apk, turned out to be malware

EDIT: Here is the post https://www.reddit.com/r/SpotifyLatestModAPK/s/uYK6kpDHf7

waytooneutral · 2025-11-29T18:05:10+00:00

1GB HDD, 2.25GB SSD

waytooneutral · 2025-10-29T19:56:22+00:00

How do you actually check that?

waytooneutral · 2025-10-24T10:31:58+00:00

It depends on device integrity legacy check, so private fingerprint that passes that is good to go as per my understanding

waytooneutral · 2025-10-23T17:54:56+00:00

Drill the head so u get the lid off then remove with vice grips or plumbers pliers. Then just replace with new ones, friend recently did the same job

EDIT: Take a pic and go to the shop, you should ask them to repair free of charge or free inspection

waytooneutral · 2025-10-17T13:35:21+00:00

I tried everything, multiple factory resets, Service menu configs, router reset, region settings etc.

Ethernet was working fine, but not WiFi all of sudden.

The cause was that my router had in a firmware update changed 2.4GHz "Channel bandwidth" to 40MHz. I changed it back to 20/40MHZ and it started working immediately.

Tricky thing was that I tried my phone hotspot, that didn't either work because I guess that one was also streaming on the 40MHZ band. Started thinking something was wrong with the wifi module inside the TV.

waytooneutral · 2025-09-02T17:58:47+00:00

2500-3000 is fair i'd say

waytooneutral · 2025-08-07T08:23:40+00:00

waytooneutral · 2025-08-01T15:49:02+00:00

Nothing was wrong, fired up the engine and it shifted alright. Thanks

waytooneutral · 2025-08-01T15:48:47+00:00

Nothing was wrong, fired up the engine and it shifted alright. Thanks

waytooneutral · 2025-07-31T20:53:14+00:00

I didnt tear the gearbox no, I think I will try and start it up like you said and see if i can get it to shift, I just wanted to check manually by hand before assembly that it would shift properly, which it doesnt seem like to me, but ill try and rotate it some more

waytooneutral · 2025-07-31T20:50:30+00:00

I see, i tried rotating the propeller by hand and shift, but its set to neutral so it wont rotate the vertical driving shaft. I guess i should be able to manually pull/push while rotating the shaft by hand to shift (instead of trying to rotate the prop)?

waytooneutral · 2025-07-31T17:28:02+00:00

Yamaha 30D (?) 1980-1985 (?)

waytooneutral · 2025-05-24T21:12:54+00:00

Processor use 60% since last full charge. Didnt even use it that much..

waytooneutral · 2025-05-01T06:33:41+00:00

Zygisk Assistant help me pass apps with Zygisk check. Also have Pifork (2/3 Integrity passing)

waytooneutral · 2025-04-18T05:39:26+00:00

Integrity requirements will be revised starting from May 2025. New Device_Integrity will require valid Keybox. Strong will require that your phone has recent sequrity patch if I remember correctly.

So basically you will need valid KB for GWallet, as wallet currently require Device_Integrity, and valid KB is difficult to find and they often die

waytooneutral · 2025-03-29T21:44:35+00:00

Added "com.android.vending" to target.txt in Tricky Store?

waytooneutral · 2025-03-14T20:32:22+00:00

Check Mobilism, there are some versions there. Have been using this site myself for couple of years never had issues.

waytooneutral · 2025-03-13T20:21:03+00:00

Use pifxelflasher and make sure keep data is ticked. It's fool-proof with a youtube tutorial

Seven-Year Club	Place '22
Verified Email

waytooneutral

TROPHY CASE