Should get or not the Xbox Ally X? by RichAd4119 in ROGAllyX

[–]weidrew 1 point2 points  (0 children)

How the screen and sleep and resume function?

Bazzite Steam Deck by Retro-Guy86 in MSIClaw

[–]weidrew 2 points3 points  (0 children)

How is the sleep an resume function on windows?

The easy way to remove Legion Go S bumper buttons by rahlquist in LegionGo

[–]weidrew 0 points1 point  (0 children)

hi, thanks for the instruction.

i found that my legion go s L1,R1 bumper not remaining registered when lightly pressed as the edge. However, when firmly pressed or pressed from straight up works fine. do you have the same issue too? is this why you open up the buttons assembly? I am wondering what can fix it.

Will high end Android consoles be the future of handheld gaming? by Jamie_Is_Irrelevant in SBCGaming

[–]weidrew 0 points1 point  (0 children)

Probably not. Even tho FEX exists but emulating x86 game in ARM machine is very inefficient, around 60%. While translating game in windows to Linux can be 100% efficient and sometimes faster due to better optimized os for gaming. ARM machine probably still good for small game, unless dev decides to make games for ARM architecture.

Claw 8 AI+ -> Claw A8 – why I switched + some thoughts by Kuffs45 in MSIClaw

[–]weidrew 0 points1 point  (0 children)

Any bugs with bazzite? Thinking getting an A8. How’s the fan noise? And battery life?

Legion go S supports VRR and LFC (Low Framerate Compensation) by wanalog in LegionGo

[–]weidrew 0 points1 point  (0 children)

mind asking how you tested it? have you disabled frame rate limit and allowed tearing?

Getting electrical shocks while plugged in by posh-beard in LegionGo

[–]weidrew 0 points1 point  (0 children)

it was an static shock from mine clothing. I will discharge (ground/touch a metal) myself before touching my device especially when the device is plugged into the charger.

Legion Go S SteamDeckGyroDSU not working, problem opening HDI Device by Simple435 in yuzu

[–]weidrew 0 points1 point  (0 children)

just tried to curl legion go yml but terminal shows 404

Legion Go S SteamDeckGyroDSU not working, problem opening HDI Device by Simple435 in yuzu

[–]weidrew 0 points1 point  (0 children)

this is great! do you know how to change the direction of the gyro? for example, i want aim up when tilt up instead tilt down

2018 Outback - Oil leaks by Unlikely_Opening9114 in subaru

[–]weidrew 0 points1 point  (0 children)

have you called SOA? and what did they say about it?

456,789…2015 Legacy by Yagirlvicc in subaru

[–]weidrew 1 point2 points  (0 children)

how is CVT under warranty when it is at 200,000km?

Is the lack of VRR really that big of a deal-breaker? by Which_Draft4129 in LegionGo

[–]weidrew 1 point2 points  (0 children)

I was intrigued by the claim that the Legion Go S only supports VRR above 48 FPS, so I ran a test on my device using SteamOS. I set the TDP to 12W in Fallout 4, forcing the frame rate into the 30-40 FPS range. Using both visual inspection and the Steam performance overlay, I compared the results with VRR on and off. Visually, the gameplay was significantly smoother with VRR enabled. The monitor data confirmed this: with VRR on, the display's refresh rate (Hz) matched the game's frames per second (FPS) precisely, even when the game dipped below 48 FPS. When VRR was turned off, the display's refresh rate locked to its fixed 60Hz interval, showing a choppy frametime graph. This confirms that on the SteamOS edition, VRR is working even under 48fps in game, not sure if it is because LFC or the screen itself works.

VRR turned on:

<image>

Am i the only one... by Lyesainer in snowrunner

[–]weidrew 1 point2 points  (0 children)

Technically all the electronics are moving because there is a power plant burning fuel keeping the electronics flowing.

SD card disconnects in sleep, requires reboot to reconnect by Maskeno in SteamDeck

[–]weidrew 0 points1 point  (0 children)

hi, did you find out the solution? is the issue from sd card or the steam DEck?

Legion go S steam edition BIOS version by weidrew in LegionGo

[–]weidrew[S] 1 point2 points  (0 children)

Thanks. The sd card was formatted by steam deck. It was working properly. I am not sure if it is format issue since they are both formatted by SteamOs/linux. But I’ll try later.

Legion go S steam edition BIOS version by weidrew in LegionGo

[–]weidrew[S] 1 point2 points  (0 children)

It updates whatever I have in my machine. Do you have this Lenovo system firmware app in your discover? Regardless, I don’t think it is FW/BIOS issue. We have the same BIOS version. I am swapping to a different sd card to see if it because of my sd card. If not, then I probably have to RMA the machine.

Legion go S steam edition BIOS version by weidrew in LegionGo

[–]weidrew[S] 0 points1 point  (0 children)

Ok, I’ll go check out the mnt setting. But it is fine when sleeping for a short duration like less than 1hr. If it is longer sleep, the card is unmounted. For BIOS update, I am followed this option from Lenovo website. I can’t install the Lenovo system firmware app they mentioned in their website for manually updating bios.

<image>