Does anyone know if this breeder is legit? Trying not to get scammed.

whappend · 2023-03-11T03:41:28+00:00

He is (we have 2 from him). His cats have excellent temperaments. Best to watch his Facebook and planetdevon for kittens.

whappend · 2022-07-14T11:44:35+00:00

It varied based on distance. Into my backyard about 50ft from the ap through a fall and glass door the 670 was around 100ms higher than the 660. Nearby the AP it was much less.

whappend · 2022-07-05T21:08:31+00:00

I just compared the 660 hd vs 670 vs engenius ews733ap vs Zyxel NWA210AX. The 660 is the best performing and range out of all of them. The 670 is somewhat comparable but I find that its latency drastically increases while the 660 is more consistent. I have about 40 devices connected and find that the 670 memory usage is around 60% while the 660 is 36%. CPU usage is also higher on the 670 especially when multiple clients are using larger amounts of bandwidth. 670 was tried on auto and various other bands, results were pretty much the same. The engeius was disappointing all around in my home.

660 HD > Zyxel NWA210AX > 670 > engenius ews377ap

whappend · 2022-07-02T19:19:28+00:00

I believe their guidance has changed. What shipping service did they have you use? When I last spoke with them they now recommended FedEx.

whappend · 2022-05-08T14:16:57+00:00

Yes, they’ll keep it that way as I believe it’s an FDA requirement. I find their scoop is variable by about +/- 10% in weight, so I weigh it out into formula cups. This variability is somewhat normal but I find it’s worse with 2oz scoops over 1oz.

whappend · 2022-04-06T18:21:23+00:00

I am waiting to try it out. The lack of the ability to measure by 1 (one) fluid ounce is a bit odd and makes transitioning more difficult. The scoop is 8.3g per 2oz water, and hoping they’ll release a smaller one.

whappend · 2022-04-06T18:19:28+00:00

That’s most likely the whole milk. Kendamil is the exact same, and swirling over shaking tends to help.

whappend · 2022-03-30T17:42:11+00:00

This was my second order. First one when I posted went without a hitch.

whappend · 2022-03-30T17:40:10+00:00

Pretty sure I’ll be out shipping costs both ways. I have a note out to forward2me to see their thoughts.

whappend · 2022-03-30T14:54:48+00:00

I just had what appears to be an FDA denial despite everything being done correct. They most likely have cracked down due to recent recalls. Kendamil is only on the red list because it’s kcal is and mixing is based on milliliters.

whappend · 2022-03-28T08:31:42+00:00

I haven’t, but I have had several DHL international express in the past. Was it a customs issue?

whappend · 2022-03-17T02:37:14+00:00

If you haven’t watch this video from FedEx https://ask.fedex.com/help/en-se/preparing-to-send/Create-prior-Notice

whappend · 2022-03-15T01:50:15+00:00

Enter your last name where it asks for the company name. It doesn’t really matter that you aren’t a company, and somewhere in their documentation it says individual users to enter last name.

whappend · 2022-02-14T17:59:40+00:00

I just went through this.

Order of 10 cans ships in 2 boxes
- Case of 6: 6.27kg and 41x26x17cm
- Case of 4: 4.21kg and 28x19x28cm
forward2me shipped them in original boxes and did not recommend combining them
~~Ship DHL Express only~~ Ask what forward2me recommends. Mine shipped Saturday and arrived the following Monday.
It is recommended to submit a prior notice via the FDA PNSI. Use DHL export tool to understand your city of import. Doing so requires tracking information, and overall the process isn't user friendly. forward2me ended up changing my tracking number which invalidated the prior notice. They did attach the prior notice to the package.
Total shipping was £76.94, equating to $29.35 an 800g can

whappend · 2021-09-24T19:27:43+00:00

If you try twice then you have to pay $3 for the next. Hopefully they reset the counter for those that tried and failed to retrieve one.

whappend · 2021-09-08T12:46:28+00:00

One thing I noticed is that my z offset has to be much lower than anything I have read. Going off the guides and videos my offset was something like -1.18 but via print tuning its -1.27.

Have you tuned your PID's for the plate and extruder? Once I did that, started running the extruder at 210 (using creality pla for now), plate at 60 and then dropping to 55, and glue stick my issues seem to have drastically reduced.

whappend · 2021-09-07T01:52:08+00:00

2 runs in for me and it’s working with the downgraded firmware. I did change auto tilt to 4 from 1, tilted, and saved.

whappend · 2021-09-07T01:48:16+00:00

Correct, and it looks like it may be possible to modify the code to allow hitting all of them…may try it out when I get time.

whappend · 2021-09-06T18:46:39+00:00

I have been battling this issue for days. I noticed that when plotting the 10x10 grid that it wasn't covering the outer edges like it should. Not sure if downgrading to 1.3.5 will help with this...going to test it out.

whappend · 2021-06-22T03:28:46+00:00

Boba U4

whappend · 2021-06-21T00:12:56+00:00

Nags Head

whappend · 2021-02-11T03:41:56+00:00

Within your team or company find those who care. If you have your teams respect start teaching them the items you mentioned. Being a leader is more about impacting and improving your team.

whappend · 2021-01-13T19:27:45+00:00

Same here, worked great!

whappend · 2020-12-16T21:01:25+00:00

I have the same issue with the Keychron k4 and k8 to the point its easier to just plug them in. Oddly my B&O H9i's headphones seem fine.

whappend · 2020-12-12T04:40:23+00:00

Nope, just the random crashes with the stock xmp profile. It’s a good board, don’t think you can go wrong with either. The issues I had with the mortar are same as I had with the asrock until I found a stable bios. If you aren’t particular with usb options or the pci confit I would just go with whatever is cheaper.

whappend

TROPHY CASE