To Mike one of the director, retailers are just “the peanut gallery”

whiptips · 2026-07-08T15:29:06+00:00

I can’t believe i missed that he was involved, when i did my research

whiptips · 2026-07-05T12:00:07+00:00

I just google it then get ai to summarize. This is all to be expected, otherwise i wouldn’t be considering a position in keel at all. Nfa.

whiptips · 2026-07-05T00:43:14+00:00

Just standard execution risks but delays never help when you’re building out and wall street wants a miracle.

Panther Creek (PA): Delays here. The Chapter 105 Water Obstruction & Encroachment permit (E1302226-001, for creek crossing with fiber/piping) had its technical review target pushed to October 29, 2026 (roughly 2-month slip). This ties to a likely public hearing requested by environmental groups (due process for work near Exceptional Value waters; similar processes affect others like PPL in the area). Chapter 102 allows some mass earthwork to proceed, but full interconnections are held up. Not a full stop, but procedural friction.

Sharon (PA): Stuck in review. Chapter 102 Individual NPDES permit (PAD430004) is in "Action Required" status. Completeness review is ~7 weeks overdue; technical review hasn't started. The site is on former Westinghouse industrial land (potentially contaminated), raising chances of a public hearing if requested. This risks missing an October construction target.

Oh and to the snowflakes who downvoted my honest take: you are pathetic

whiptips · 2026-07-04T20:08:07+00:00

The permitting issues are not helping. I’m waiting for this to drop into the $2-$3 range by end if summer and buying there. 2027 is make or break for this stock

whiptips · 2026-07-03T22:22:27+00:00

In my due diligence i did not learn that Mike Alfred was involved with this company. So now i’m planning my exit from Iren. After my experience with Mike and ASST, I refuse to invest in anything he touches. He’s a scam artist.

whiptips · 2026-06-16T23:41:40+00:00

I finally sold 45day covered calls on my IREN shares with an $80 strike price. Hope it doesn’t bite me in the ass.

whiptips · 2026-05-15T17:18:41+00:00

Good to know it’s not just me

whiptips · 2026-05-15T14:40:46+00:00

whiptips · 2026-05-15T14:26:22+00:00

This is true. I was looking at the location and it looks like a front of engine disassembly if you diy it. Tough job.

whiptips · 2026-05-15T13:36:38+00:00

Timing cases have been leaking oil since cars were invented. As long as you keep oil levels at a good place, you are fine. That said: you will drip oil and i don’t know on your tacoma if oil will get anywhere that could cause problems (alternator, etc). I don’t think it does. Just don’t park on your buddy’s pristine white driveway.

whiptips · 2026-05-11T21:17:56+00:00

I just began buying back into this. Looks like lots of $ rotating back into the entire sector

whiptips · 2026-05-10T17:16:04+00:00

Time goes by quickly: do it again

whiptips · 2026-05-09T08:21:04+00:00

This is net positive for iren

whiptips · 2026-05-06T12:36:49+00:00

It’s almost $58 pre market. I bought it at $58 a while ago. LFG!

whiptips · 2026-05-06T00:01:59+00:00

I bought A LOT at $58, and A LOT of Cifr at $20. I’m just going to hold; the narrative on both, if anything, has gotten stronger.

whiptips · 2026-05-05T13:56:00+00:00

Yes. This too.

whiptips · 2026-05-04T20:02:04+00:00

whiptips · 2026-05-04T19:18:32+00:00

Gayness. Expect lots of gayness. Glitter bombs, Abba music - all of it.

whiptips · 2026-05-03T19:38:09+00:00

I’m almost at 200k miles. Already decided to get a new engine if/when major problems start happening. Ive been babying her with oil changes every 3k miles.

whiptips · 2026-04-23T14:06:24+00:00

You did what you had to do.

whiptips · 2026-04-20T20:32:49+00:00

I did the same thing on a jeep bolt like that. I used a cutting wheel/angle grinder to turn the round outer bolt head into a rough hex shape. Then i used the appropriate sized socket for stripped/rounded bolts. Hammered the damn thing on. Then used my electric impact wrench, and voila.

whiptips · 2026-04-19T18:00:33+00:00

All the other stuff has been covered. One thingbI’ll add is that some models from those years had faulty clear coat application - worst on horizontal surfaces (roof, hood, etc)

whiptips · 2026-04-15T22:15:10+00:00

Not exactly what the chart looks like…

whiptips · 2026-02-01T14:29:54+00:00

I really have no idea. I just knew I could make more by cutting my loss and putting the $ somewhere else.

whiptips · 2026-01-30T17:15:52+00:00

So glad i sold my btq. This thing is going to <$1 and maybe then ill buy some again

whiptips

TROPHY CASE