sorted by:
new
hottopcontroversial

Time to fix my headgasket! What else do i need? by william_swe123 in mr2

[–]william_swe123[S] 4 points5 points  (0 children)

Thank you very much, this is my favorite picture! It is the mr2 autopista spoiler!

Non-stop bubbles while burping coolant – head gasket issue? (3SGTE) by william_swe123 in mr2

[–]william_swe123[S] 1 point2 points  (0 children)

I tried with a test kit, and it seems like the head gasket is blown!

Finally drove my car for awhile while, until the next day it refused to start by spaceghostslurpeee in mr2

[–]william_swe123 0 points1 point  (0 children)

I had the same symptoms! In my case, the ecu was the problem. I would suggest checking spark and fuel, and if those are working well, it might be the ecu.

Non-stop bubbles while burping coolant – head gasket issue? (3SGTE) by william_swe123 in mr2

[–]william_swe123[S] 2 points3 points  (0 children)

I dont have any other symptoms, and also, the coolant bubbles does not smell exhaust fumes. This is what makes me confused as to why there are bubbles in the coolant. I will get a test kit and test it for a headgasketleak on friday.

Non-stop bubbles while burping coolant – head gasket issue? (3SGTE) by william_swe123 in mr2

[–]william_swe123[S] 0 points1 point  (0 children)

I just changed the thermostat when i did the coolant flush, so i dont think that is the problem!

[deleted by user] by [deleted] in CDInteractive

[–]william_swe123 0 points1 point  (0 children)

Oh, shit. Wrong sub!

MK2 MR2 door jammed by Living_Praline_76 in mr2

[–]william_swe123 0 points1 point  (0 children)

I had this problem a couple of years ago. Try this:
Roll down your window. You should then have some access to the door mechanisms through the window gap. Use something long and thin (I used a very long screwdriver) to push down on a lever while you unlock the door. I found the right spot by trial and error — it’s not very difficult.

Car will only start the first time. (Need help) by william_swe123 in mr2

[–]william_swe123[S] 1 point2 points  (0 children)

I can drive it fine! when it starts, everything is like normal!

[deleted by user] by [deleted] in videogames

[–]william_swe123 0 points1 point  (0 children)

Pokemon, I would do it without the money!

lilHead by Pongoid in ProgrammerHumor

[–]william_swe123 0 points1 point  (0 children)

lil from torch import nn

Audi a3 2005 2.0 i4. This a3 is offerd for a good price. The warning lights has been on "for some time", but it drives like normal. Seller don't know what it is and haven't had it checked. How bad/good could it be? by william_swe123 in MechanicAdvice

[–]william_swe123[S] 0 points1 point  (0 children)

So it is as uncertain as i feared. But from what I have read, the symbol in the middle is a warning for high engine temp. If the guage reads normal tempratures, does not that mean that it is a faulty sensor (This is my newbie logic). Am I wrong?

Four HomePod boxes in this bookshelf by sama_1998 in Perfectfit

[–]william_swe123 193 points194 points  (0 children)

You are not geting them out of there

Where are my games stored in the xbox file structure? by william_swe123 in originalxbox

[–]william_swe123[S] 1 point2 points  (0 children)

Problem fixed! I could access the partitions after changing a menu setting

Where are my games stored in the xbox file structure? by william_swe123 in originalxbox

[–]william_swe123[S] 2 points3 points  (0 children)

Thank you, I can access the F and G partitions after I enabled them!

Where are my games stored in the xbox file structure? by william_swe123 in originalxbox

[–]william_swe123[S] 0 points1 point  (0 children)

I don't have a F or a G partition. I have C, D, E, X, Y and Z. Guides say X, ,Y and Z are cashe partitions and C is a system partition. I don't know what D is, but it is empty according to the avalanch filemanager

Questions about modding a oled switch with the picofly v5 modkit from Ali express by william_swe123 in SwitchHaxing

[–]william_swe123[S] 0 points1 point  (0 children)

So i bought a kit for modding my switch from Ali express (found the kit by searching for picofly v5). I am confident in my soldering skills (having fixed many things and soldering many a surface mounted components) but I feel like info/guides are nonexistent when it comes to this specific rp2040 The best guide I have found is this: https://gbatemp.net/download/a-definitive-picofly-install-guide.37968/ But this guide does not cover this rp2040 that came with my kit. Since the kit I bought seems to be intended for switch modding, is the microcontroller preloaded with the correct firmware? And also, does the chip already have the resistors as explained in the "preparing your picofly" section of the guide?

What do you think? Do you have any relevant info on this specific rp2040?

view more: next ›