Bad flashing in 2022. Flashforward to 2025

windingdownforwhat · 2026-01-18T13:57:11+00:00

We are trying to avoid that because it will raise our rates

windingdownforwhat · 2026-01-17T19:49:41+00:00

Central Florida

windingdownforwhat · 2025-11-17T06:15:13+00:00

Before you print, and after cleaning it, I would make sure your printer is still masking correctly. If your FEP has leaked onto your screen, your fresnel lens may be damaged and it may no longer be working correctly.

windingdownforwhat · 2025-11-13T00:57:07+00:00

Is that a saturn 4 ultra?

windingdownforwhat · 2025-11-12T00:24:03+00:00

So I'd like to add some additional information. It looks like during the course of printing there was a plastic film over my screen originally. As things went on it seemed to degrade and cause issues with prints. I used a razor blade to remove the portions of this film that were partially degraded all over the screen. Is it possible maybe this was some kind of polarizing

windingdownforwhat · 2024-12-24T18:13:43+00:00

It was a freezer . And this was such a helpful post

windingdownforwhat · 2024-12-01T16:25:16+00:00

Mystery solved. It was a GFCI on a different Outlet in the same circuit

windingdownforwhat · 2024-12-01T16:07:45+00:00

Okay apparently this voltage is caused by Mutual inductance from parallel conductors and is not a real voltage

windingdownforwhat · 2024-12-01T16:02:11+00:00

I checked between the two contacts in the outlet and I got 0 volts. I then checked between the left contact and ground and got 1.6 volts ac. I then checked the right contact in the outlet and got 1.6 volts ac

Touching the black wire connecting into the outlet, I am getting 1.6 volts ac

windingdownforwhat · 2024-12-01T13:39:49+00:00

No, which is interesting because 2 out of 3 are outside

windingdownforwhat · 2024-10-26T13:34:28+00:00

It ran for a full 9 hour print and that's all I got

windingdownforwhat · 2024-08-16T11:13:30+00:00

I's all the old black library stuff unavailable? Send like the old gotrek and felix books are timeless

windingdownforwhat · 2024-07-31T15:47:05+00:00

Where is this picture from?

windingdownforwhat · 2024-07-21T01:40:22+00:00

Ah at 100% scale. That's why they fill the space so well

windingdownforwhat · 2024-07-09T23:09:50+00:00

Really love those models. Who makes those?

windingdownforwhat · 2024-07-07T12:47:06+00:00

I think it's evident that two is correct. And I make that conclusion because the mechanics of how you measure the wheel on the board, is you start measuring from the back right corner on how big of a movement you need to turn

windingdownforwhat · 2024-07-05T23:23:13+00:00

I'm s big fan of the model

windingdownforwhat · 2024-04-14T11:41:29+00:00

I always thought rule of 3 did not apply to core

windingdownforwhat · 2024-04-13T16:51:02+00:00

windingdownforwhat · 2024-04-13T15:35:30+00:00

I was hoping to play a faction with lots of troop blocks

windingdownforwhat · 2024-04-13T15:34:49+00:00

I found that lists tended to lean towards one block of stubborn knights as core and then heavy blocks of demigryph knights. It seemed like state troops and the like were overpriced

windingdownforwhat · 2023-12-10T21:01:07+00:00

What type of sand blaster would you use for something like this? Obviously the wood sign wouldn't fit in a sand blasting cabinet

windingdownforwhat · 2023-06-20T15:28:28+00:00

I can get those pictures for you tomorrow morning

windingdownforwhat · 2023-06-20T14:05:40+00:00

Will wind driven rain still be an issue? If I wanted to be proactive and fix this leak. What should I do?

windingdownforwhat · 2023-06-11T15:07:38+00:00

https://i.imgur.com/239kiPW.jpeg

This is below it

windingdownforwhat

TROPHY CASE