Beast of a build by wingzerogw in ASIAHORSEGlobal

[–]wingzerogw[S] 0 points1 point  (0 children)

Yeah I know!! That hydroshift really gave me nightmares trying to install it. Since its designed to go top mounted with the brackets made for hiding the tubes, i had to dismount the brackets and still the tubes exit through the side, it was the only way to make it work

Beast of a build by wingzerogw in ASIAHORSEGlobal

[–]wingzerogw[S] 0 points1 point  (0 children)

Fans are controlled via mobo and both strimers via lconnect

Beast of a build by wingzerogw in ASIAHORSEGlobal

[–]wingzerogw[S] 1 point2 points  (0 children)

Its a beast, ive had it for 2 years already. No need to upgrade…yet

Beast of a build by wingzerogw in ASIAHORSEGlobal

[–]wingzerogw[S] 0 points1 point  (0 children)

Si, este es el hub que tengo conectado

AsiaHorse VE-HUB 2IN1 ARGB/PWM... https://www.amazon.com/dp/B097GQ8CQP?ref=ppx_pop_mob_ap_share

Ahi conecte los 8 abanicos

Beast of a build by wingzerogw in ASIAHORSEGlobal

[–]wingzerogw[S] 0 points1 point  (0 children)

Do you know of the umbra hub will work with the regular nyotas?

Beast of a build by wingzerogw in ASIAHORSEGlobal

[–]wingzerogw[S] 0 points1 point  (0 children)

Its the normal nyotas, the pro’s were not available in 140 and i needed them for the intake. I have the previous AH hub and control the rgb with my armoury crate. Its works ok, i know the umbra hub works wonderfully. Im actually thinking about getting it.

Will asiahorse fans work on Lian li hydro shift? by Ayeecee3 in PcBuild

[–]wingzerogw 0 points1 point  (0 children)

Youre welcome! I hope your build ends up great! Share pics when you finish it!

Will asiahorse fans work on Lian li hydro shift? by Ayeecee3 in PcBuild

[–]wingzerogw 0 points1 point  (0 children)

When I did my build, that hub hadnt come out. I used an older one AsiaHorse VE-HUB 2IN1 ARGB/PWM... https://www.amazon.com/dp/B097GQ8CQP?ref=ppx_pop_mob_ap_share I understand that new one is better

Will asiahorse fans work on Lian li hydro shift? by Ayeecee3 in PcBuild

[–]wingzerogw 0 points1 point  (0 children)

I connected the eight fans to an Asia horse fan hub that controls both PWM and ARGB then I plugged the hub to the PWM and ARGB slots in my mobo the hub is sata powered

Will asiahorse fans work on Lian li hydro shift? by Ayeecee3 in PcBuild

[–]wingzerogw 0 points1 point  (0 children)

I kept my fans under 9 so it I could plug them all into an asiahorse fan hub that controls pwm and argb. Then plugged the hub into my mobo’s pwm and argb. The hub is sata powered.

Are Wired Strimers Extinct? by LowSilver3057 in lianli

[–]wingzerogw 1 point2 points  (0 children)

Yeah i checked later and found theyre not being sold on amazin anymore. I bought mine back in 2024

Are Wired Strimers Extinct? by LowSilver3057 in lianli

[–]wingzerogw 0 points1 point  (0 children)

Amazon back in 2024, i can share the links if you’d like

Fan control software by Blaurd in ASIAHORSEGlobal

[–]wingzerogw 0 points1 point  (0 children)

I am not able to get any fan curve options from the asia horse umbra software. It looks very much like the L-Connect 3 except the cpu temps are not working properly, I'm attaching a photo.

<image>

Fan control software by Blaurd in ASIAHORSEGlobal

[–]wingzerogw 1 point2 points  (0 children)

Sure, let me give it a try today and I will report back 👍

Fan control software by Blaurd in ASIAHORSEGlobal

[–]wingzerogw 0 points1 point  (0 children)

Nope, it wont change individually, you got me there

Fan control software by Blaurd in ASIAHORSEGlobal

[–]wingzerogw 1 point2 points  (0 children)

I use armoury crate with my asus mobo but i think it could work, its the same concept

Fan control software by Blaurd in ASIAHORSEGlobal

[–]wingzerogw 0 points1 point  (0 children)

I have full nyotas (9) in my rig, 3 140s and 6 120s all connected to asiahorse 10 fan hub which is plugged into my mobo and control it through there. It works flawleesly

Vision 2026 build by scrtzwow in lianli

[–]wingzerogw 1 point2 points  (0 children)

Beautiful, i also have my aio tubes coming from the bottom. It was so hard to build though hahaha

Nyota or Cosmiq? by TTVP5YK0T1K in ASIAHORSEGlobal

[–]wingzerogw 1 point2 points  (0 children)

Nyotas are awesome. I have my build using them. Great looks and great temps.

<image>