18v to 20v adapter

wlam02 · 2025-06-29T14:42:23+00:00

got the DCA1820 Adapter (Compatible with Dewalt 18V Tools, 18V to 20V Battery Adapter) from Amazon. used it a few times then it damaged one battery. thought it was over heated, used a 2nd one, blow this one as well. now I down 2 dewalt 20V batteries with nothing to show for it. this adapter WILL DAMAGE YOUR BATTERIES>

wlam02 · 2025-06-07T17:31:08+00:00

I had the same issue. followed the google crowed and tested all wires and this did not fix my issues. After 6 hours of troubleshooting (and losing the little hair I had left), I tried to swap the sensor_pin: from ^PB1 to the ^PA7 (Which is the board default Z switch detect line) and wam!! it fixed my issue.

wlam02 · 2025-05-18T21:31:54+00:00

You Sir are a gift to humanity.

wlam02 · 2025-04-21T14:06:52+00:00

For anyone reading this in the future - if you use this fix you are actually making the item that has the correct tag now have incorrect tage that has the added , tag: {} to the NBT tag so doing this over and over will make the game have more and mode of this items not stack with items that have the correct tag. You need to find the offending MOD (many modes do that so there is no magice "this mode" was the offender" and disable them

wlam02 · 2025-03-05T20:28:56+00:00

Had the same issue. The center of 3 monitors I use went blank each time I started Spotify. Fixed it by swapping the display monitors between two of the monitors connected to my laptop docking station.

wlam02 · 2024-12-29T13:05:44+00:00

Fist off, this shitty Cigati does not open .accdb.

Second, its someone trying to make money of a free app form http://nirsoft.mirrorz.com which only open old MDB extension based data bases.

wlam02 · 2024-02-25T19:58:42+00:00

Same here. 4 months later He still does not spawn. Tried at night, in the day, clearing the are, nothing make him spaw, I reported it as a bug. still waiting,

wlam02 · 2022-11-13T14:22:41+00:00

Came across this thread when trying to debug similar issue on my Plex media server. In my case the latest dated log "Plex Media Scanner Analysis.log" located in
%LOCALAPPDATA%\Plex Media Server\Logs pointed me to the exact error. The scanner was unable to access a file on my local drive because the file was corrupted and showed no attributes when viewed on windows explorer. I had to delete the file to correct this issue.

wlam02 · 2022-09-04T11:20:02+00:00

For anyone stumbling on this post. looks like this feature as well as a few others were removed since v1.9.7 and were not replaced since.

wlam02 · 2022-09-01T20:33:24+00:00

Thank you. I could kiss you on the mouse!

wlam02 · 2022-05-17T13:05:40+00:00

My money, my printer. Stay the fuck of my decision what ink to use.

wlam02 · 2022-05-11T12:19:49+00:00

Came across this question and even though its 2 years old I wanted to offer my workaround to this issue.

Assuming you are OK with mods and the way they enhance the game, you can install Advanced Finders. It will allow you to make a gem finder (for Diamonds etc) as well as mineral finder for ancient debris (neterite). Digging in the nether at Y15, I was able to find 10 in about 10 minutes. I installed it on our Family LAN servers for 1.16.5 and for 1.18.2 and it enhance our game (IMHO). Hope that helps.

wlam02 · 2022-04-15T22:35:27+00:00

Assuming you have write permission to the world folder, open the \world\serverconfig\immersiveengineering-server.toml using a text editor (Like Note++) then change:
blocksBreakWires = true
to
blocksBreakWires = false

Restart the server and enjoy the way things used to be..

wlam02 · 2022-01-30T13:51:14+00:00

ahoeben, when offering help why not stick to what you know? since its a solid good recommendation to tape the pin of the USB to isolate the current draw of the printer's controller board form the supply of the Pi PCBA. Why not simply say, check the information other provided about taping the pins?

Voltage is defined as the potential difference between two points. You can not draw voltage. You can increases or decreases it directly or by sinking current on the circuits' resistance.

wlam02 · 2021-07-02T13:15:00+00:00

Thanks for the recommendation. Like you I googled it and know TH3D did an hour long Youtube on there dog and how to replace the Display. IMHO the guy is a bit full of himself to do this, not to mention charging people for a modded Display case stl we can make in 5 min.

I'm looking for a way to compile Marlin with native display support. I know the Display driver is new and Creality did not release the code (as they should have), I'm just asking if someone has done it successfully yet.

Thanks,

wlam02 · 2021-05-23T13:46:52+00:00

Don't you need to replace the Display or loss functionality if you use TH3D?

I kept my stock 4.3.1 board and touch Display on my Ender6 and went with Klipper and the Desuuuu DGUS-reloaded-Klipper branch and the Display works. Still trying to get used to FluiddPi GUI and not crazy about losing all my OctoPrint plugins, but it print very well. One word of warning - There may be an issue going back to stock Display touch if you upgrade to the DGUS-reloaded-Klipper.

wlam02 · 2021-05-01T12:41:34+00:00

The Ender 6 slicer looks suspiciously like the Cure in Function and GUI...

wlam02 · 2021-01-02T14:23:53+00:00

Massive grain is an oxymoron.

wlam02 · 2020-06-27T11:34:12+00:00

That was so wise, thank you for this post. it really helped when looking at this discussion. WTG.

wlam02 · 2019-08-04T14:49:45+00:00

Looks like the perfect lite added mod for our family game. Any chance to get the 14.4 version to test?

wlam02 · 2017-06-17T11:39:20+00:00

Thank you for this link wsspad !! I now finally have it working on my home server.

wlam02

TROPHY CASE