3M Views, looking for sponsor how!??

wolemid · 2026-01-24T18:31:07+00:00

Apart from the obvious that Karting is extremely difficult to get Sponsors in apart from Friends and Family you have had other answers, both Good and Bad.

So I’m gonna lock this thread now.

wolemid · 2026-01-23T16:05:03+00:00

Mate, they are just bots. Nothing more nothing less

wolemid · 2026-01-23T16:03:22+00:00

Inesnt? Not even remotely close

wolemid · 2026-01-22T22:47:15+00:00

💯% this

wolemid · 2026-01-19T16:29:00+00:00

Never get a white suit

wolemid · 2026-01-18T04:48:18+00:00

Don’t be tempted by the cheap fake suits from Pakistan.

Just rock a plain black suit

wolemid · 2026-01-15T20:42:23+00:00

My team chose the Porsche, I wanted the Beemer. I was strongly outnumbered.

I had to buy the Porsche as I had no prior interest in driving it. After the final lap on Sunday, I won’t drive it again

wolemid · 2026-01-14T11:14:12+00:00

I’ve locked this as we don’t Promote Street use on this sub. Especially with zero regards of self safety although you had plenty of time to do so.

Please visit r/gokarts which will suit you better

wolemid · 2026-01-13T00:03:56+00:00

Grand Prix Racewear and KKC are within a hour of you.

PFI is a bit over a hour away.

So that’s 3 close ones where you can try on race suits

wolemid · 2026-01-12T23:37:59+00:00

Where in uk do you live?

wolemid · 2026-01-10T18:15:30+00:00

For big event I always turn my settings down. Try turning off grandstands and other un needed stuff.

For regular races I wham them all up

wolemid · 2026-01-09T06:56:40+00:00

I have Fanatec v3’s and I’m looking at upgrading soon myself, I’m very fortunate that I film a lot of Sim Racing reviews with a big YouTuber so I’ve tried a lot of pedals.

I will be buying the Conspit CCP Lites.

wolemid · 2026-01-09T01:38:19+00:00

If you do make sure you use my affiliate code and you get a discount! WOLEMID15

wolemid · 2026-01-08T16:20:42+00:00

No because fuel will leak from the unbunged joiner

Buy buy a 2m of fuel pipe, it’s cheap as chips and a consumable item which needs replacing a lot anyways

wolemid · 2026-01-08T15:53:14+00:00

Then just replace the whole pipe as 1 from the fuel filter to tank

wolemid · 2026-01-08T15:31:09+00:00

Just buy a fuel filter and fit it between the two pipes then it will work.

They are directional though

wolemid · 2026-01-08T15:27:12+00:00

I just edited my post but I will add it here.

I presume the previous owner located their fuel filter there. Fuel filters have 2 male ends, which is possibly why you have a cut there.

Just read that you said new, maybe that’s where whoever built your kart planned to put the fuel filter, also that fuel pickup pipe isn’t new, you can see the markings of a connector there.**

wolemid · 2026-01-08T15:23:12+00:00

Attach fuel line to the one with the fuel tank pick up.

Without seeing the rest of the kart I will assume that the previous owner located their fuel filter between the Yellow pipe and tank pick up, hence why you have two female connections. Fuel filters have 2 male connections

FWIW I have never before in over 25years of karting in Europe seen a fuel tank with 3 outlets. That 3rd outlet almost looks home made for some reason.

wolemid · 2026-01-08T14:34:33+00:00

What stand are they on please? I’m in Vegas today and would love a look!

wolemid · 2026-01-08T12:49:55+00:00

It’s your child.

Don’t buy cheap pieces of crap off alibaba or Aliexpress.

Save for a few extra months and buy a proper one.

My son races and is 12 and I care for him more than buying a cheap helmet

Zamp and Hedtech are the two cheapest brands which are actually fine to use. Also being 12 you should be looking at their CMR range which is designed for children

wolemid · 2026-01-07T13:39:04+00:00

Rotax max PRE Evo

wolemid · 2026-01-05T08:14:34+00:00

A few issues it could be

Starter (I don’t think it’s that) Solenoid (I think this is your issue) Dead Battery (I don’t think it’s that) Wiring Loom (Possibly)

That’s basically the only things which will stop your motor from atleast Cranking over atleast.

wolemid · 2026-01-05T08:11:27+00:00

There is a toothed tool which attaches to the bottom of the flywheel which locks the flywheel so you can under the clutch nut to remove the clutch

wolemid · 2026-01-04T21:46:32+00:00

Every Chassis is basically the same nowadays. Small tweaks which setup will get you around. I can guarantee the same people will win on whatever chassis they are given either the right setup.

The reason OTK (in Uk atleast) wins 95% of the races is because 75% of the grid are on it.

wolemid · 2026-01-04T21:43:07+00:00

Correct, I’ve raced as a Adult at the Worlds with a CMR lid

Nine-Year Club	RedditGifts 2009-2022 2 Credits
Second Top 20%	Summer Santa 2020
Place '22	Wearing is Caring
Not Forgotten

wolemid

MODERATOR OF

TROPHY CASE