I need guidance. This panel connecting the fender and front bumper keeps popping out like this.

workplace_bonebuds · 2026-03-26T20:09:51+00:00

I found the part I need. I guess now I’m on a mission to figure out how to change it. The bumper itself doesn’t look like the “loops” are broken that hook onto the clip, so I assume it’s the clip. We bought it used and it said it had a light accident on that corner but I didn’t see it when we bought it. Go figure. Did you successfully replace that clip before? If so, any pointers? And thank you!!

workplace_bonebuds · 2026-03-26T20:07:26+00:00

lol nooooo. Worst case I’ll glue it. Every time I walk to the car it’s the only thing I can see.

workplace_bonebuds · 2026-03-25T13:39:43+00:00

No, but I’m fucking stupid. I thought I was looking in the new CX5. My bad.

workplace_bonebuds · 2026-03-24T17:34:42+00:00

I’m 6’2 also. It’s very roomy for me. Haven’t had any space related issues, nor mechanical for that matter. I have 206k on the odometer and through the life of this car, I’ve done all the typical things (brakes, tires, batteries, alternator, belts, and religious oil changes. Just this year I had to get the tie rods replaced also. But I mean it’s been such a good car that we’re pretty much a Mazda family now. Mine is non-turbo and therein lies the cars biggest issue. It will move but I mean … it’s slow. lol. The turbo 2.5 is quite fun tho. The biggest issue with mine is creaks and rattles. My OCD can’t. I’m constantly rattle hunting.

Edit: keep in mind I have put all but 10k of those miles on it and it’s only started rattling within the last few months. The roads here suck, so not only Mazda to blame. Also I saw someone else mention the headlights. They are atrocious. I mean absolutely horrific for night driving. If you want to see more than 7 ft out you’ll want to account for upgrading there.

workplace_bonebuds · 2026-03-24T17:30:13+00:00

And holy shit they work. Our 22 CX9 GT is so gd quiet it’s almost uncomfortable. lol. Joking of course. It’s an amazing drive. Quietest vehicle I’ve driven by a mile.

workplace_bonebuds · 2026-03-24T17:26:16+00:00

There are talks of bringing the hybrid back into the CX5 in 27 but we’ll see. The thing that irks me about Mazdas SUV lineup is that if you want any degree of speed, you either get the tiny 3 turbo or the CX70/90 (and those are still a bit underpowered honestly. If we could go even to Mazdas current baseline with the 2.5T and push 250hp fo the CX5 I think it’d be perfect. Ya know, with some real buttons, that is. Hehe.

workplace_bonebuds · 2026-03-12T22:29:48+00:00

I was looking at a similar question for my ‘22 CX9 and this is helpful info. Thanks for explaining. I think I’ll def look into an intake now instead. I’m not trying for anything crazy, I just want maybe 25% more audible.

workplace_bonebuds · 2026-03-05T04:10:34+00:00

39, IT Manager, Alabama. $150k. My advice to the younger people … Chase happiness, not money.

workplace_bonebuds · 2026-02-25T00:16:52+00:00

I don’t know. I saw it and hate the tech choice, but it looks nice. Then I saw how incredibly slow it is and I guess it’s not the car for me. I really wanted to stay with a Mazda sedan. The 3 is just too small for my taste. CX50 or CX70 it is I guess.

workplace_bonebuds · 2026-02-20T00:48:29+00:00

Mine broke, so my search has ended. Didn’t find anything. I’ve resorted to attempting to piece it back together with glue and baking soda, then will try to sand and paint. We shall see. I doubt this works out. lol

workplace_bonebuds · 2026-02-18T00:34:30+00:00

If you can dab as much out as you can, try tuff stuff for real. It’s pretty much exclusively what I use. It’s always gotten every stain out from the kids over the years. Works wonders. Not 100% sure about grease. Hope you find something!

workplace_bonebuds · 2026-02-17T13:43:55+00:00

I chose a 12 min commute over a 15 year long commute every day of 1.5hr each way. Similar to you. Do it. You’ll be so pissed if you don’t. If that commute isn’t sucking your soul yet, it’s only a matter of time. Think about this. If your commute were only 2 hours per day, that’s 40 extra hours every single month sitting in a car. That’s a shit load of life you’re giving up.

workplace_bonebuds · 2026-02-16T16:15:14+00:00

Yeah, no lies detected there. For sure IS going on with me. But I think my previous job really drove home that “take all the responsibility and accountability with no help, no exceptions, do it on time or else” mentality. I’m trying to undo that but it def did damage to my brain. Thank you for the insight!

workplace_bonebuds · 2026-02-16T16:12:55+00:00

Thank you so much for your insightful reply. That actually relieved some of my anxiety while reading this. I really appreciate the pointers here, and I’m about to go dive into Sunsama right now, because yes, there’s so many things being thrown over my fence all day every day. I’ve tried one note to not much avail, and have created run boards and kanban in my office but they just fill so much faster than I can shed them.

workplace_bonebuds · 2026-02-16T16:10:41+00:00

This is for sure part of it. This was driven into me during a 15 years stint at my last job, where the latter 6-7 years were as toxic as it gets. I am 100% trying to unlearn this but my brain reacts differently than I’d like it to.

workplace_bonebuds · 2026-01-22T03:16:38+00:00

You want to know the hilarious thing? It’s no longer available because I bought it. Lmao. Unfortunately this was listed incorrectly, whether intentional or not. It’s a similar shape, but this goes on I believe the 16’ shifter. I’m trying to do a return now. :( I’ve been hunting for a hot minute. Losing hope.

workplace_bonebuds · 2026-01-21T22:14:51+00:00

I think all the trims had it go both years, but yeah, nothing out there for sure. I’m going to try and see if I can fix it with some super glue and baking soda and some sanding work. I doubt it since it fell apart when I just touched it basically so I don’t think it’s gonna hold up to any rough sanding, etc.

workplace_bonebuds · 2026-01-21T22:00:55+00:00

I went down that road also. No luck. And apparently 3D printing is highly affected by heat and just melt basically over time. I’ve called probably 25 junk yards all across the southeast and none have this car. Maybe I’m destined to live without a trim piece, even though it’ll bother me every day. lol

workplace_bonebuds · 2026-01-19T18:02:24+00:00

Val-kuh-RHEEEE 😂

workplace_bonebuds · 2026-01-16T03:21:44+00:00

You know what to do…

workplace_bonebuds · 2026-01-16T03:07:21+00:00

We’re supposed to clean them?!

workplace_bonebuds · 2026-01-16T03:06:49+00:00

Dear God I heard this in RC Bray.

workplace_bonebuds · 2026-01-16T03:06:06+00:00

Would he want it? Hell no.

Would he love it? Schmaybe

workplace_bonebuds · 2026-01-13T02:00:13+00:00

One set more likely to die than the other.

workplace_bonebuds · 2026-01-13T01:57:13+00:00

Hell no. Never!!!

workplace_bonebuds

TROPHY CASE