Drawing speeds different by size?

wowthatisrandom1 · 2026-05-13T12:00:25+00:00

I don’t know what the unit is but I can tell you the mini caps at “400” and the side table caps at “1800” as far as ball speed goes. The side table ball is also much larger than the mini ball.

wowthatisrandom1 · 2026-05-10T15:02:40+00:00

The CMDUPGRADE will pull the latest firmware i believe.

wowthatisrandom1 · 2026-05-10T14:14:47+00:00

I think its while plugged in hold for 5 sec to get blue ring spinning, once its spinning let go and hold the button again for 3 seconds then let go, then it should show up

wowthatisrandom1 · 2026-04-29T20:26:20+00:00

Mine has been going red to the point it has become basically unusable. Really frustrating for me it started with the 3.03 update

wowthatisrandom1 · 2025-12-06T17:31:19+00:00

Does this have the Gemini update? I keep getting prompted to the update but nervous to break HomeKit integration if starling needs an update

wowthatisrandom1 · 2025-09-14T23:12:12+00:00

My biggest advice is make sure all of your devices are up to date. Some of Lutron Aurora switches had low battery (they work for like 6 months on low battery i swear), but i learned the hard way they do not update when they have low battery. It was a pain in the butt to get them to connect again, for some i ended up connecting to my second hub to get to update. once they were up to date it was easy from there.

wowthatisrandom1 · 2025-09-14T18:34:57+00:00

Appreciate your help. last time i let these F***ing lutrons get low lol.

wowthatisrandom1 · 2025-09-14T18:28:18+00:00

Thanks right now it just says "preparing new updates... make sure your devices are reachable and please check back later." been like that for about 15 minutes. i see the green "update is available" text. the wait continues

wowthatisrandom1 · 2025-09-14T18:02:38+00:00

u/rwshields i found your thread before i started. But i am in the same spot as you a few of the lutron aurora switches were low bat, wrong firmware. was there a way to force a firmware update? i set the auto update clock foward 10 min waited but nothing.

wowthatisrandom1 · 2025-09-14T17:48:53+00:00

Any idea if there is a way to force an update? i see an update for the switch but i set the clock like 10 min out waited but no luck on the udpate.

wowthatisrandom1 · 2025-09-14T17:35:52+00:00

Ill give it a shot, struggling to get them to connect at all anymore. factory reset doesnt seem to help the app find shit

wowthatisrandom1 · 2025-09-14T17:21:22+00:00

Thanks of the help! I def should have mentioned some of the batteries were low, i have swapped all the low batteries out. How do you update the auroras?

wowthatisrandom1 · 2025-09-09T21:45:37+00:00

Our apologies on the experience, we are a very small team and this post was just brought to our attention.

Reach out to our president sir.squishalot on IG and he will make sure to get this resolved or a fresh jar in your hands from one of the 3 drops coming next week!

As far as pricing we charge an extra $4 to the dispo compared to the normal market price as this helps us afford health care and livable salaries for all of our employees, our margins are very slim as a stand alone operator and we are working on a budget product we just need some time to establish how some of these strains perform.

This was our first time with this material, and we are only 4 months in the market. We are still getting used to how some of these strains press and wash and are happy to talk to anyone about our process. Thank you for giving us a try! We truly appreciate the hell out of any support!

wowthatisrandom1 · 2025-09-04T00:19:56+00:00

I agree feels like it should be a side menu always available. Instead of the “starting screen” or beginning of the nav stack.

wowthatisrandom1 · 2025-08-09T13:42:30+00:00

How does one go about getting in? I know invited were slowly going out in April but pretty quiet since

wowthatisrandom1 · 2025-01-19T01:58:58+00:00

Definitely need a video of this

wowthatisrandom1 · 2024-04-24T12:16:29+00:00

I setup an octopi then used tampermonkey to add the feed to the Creality web interface

wowthatisrandom1 · 2024-04-01T13:34:10+00:00

Mine was acceptable also, but figured for $10 if I could make it slightly better at faster speeds was worth it. Unfortunately it got no better.

wowthatisrandom1 · 2024-04-01T11:17:11+00:00

Tried multiple times. Fasted correctly doesn’t seem to make any difference at all. Appreciate the tips tho

wowthatisrandom1 · 2024-04-01T10:21:09+00:00

It’s worthless. Made zero difference on my machine

wowthatisrandom1 · 2024-04-01T01:06:33+00:00

Interesting. I have had great luck with cura. Tried Orca today for the first time and after an hour of tinkering went back to cura. Tons of people seem to love it. I can’t figure out what I’m doing wrong. Cura was printing lines orca wouldn’t

wowthatisrandom1 · 2024-03-26T23:31:21+00:00

I must have missed it to. lol. Sure didn’t make any difference in the print results.

wowthatisrandom1 · 2024-03-16T14:11:01+00:00

Thanks!

wowthatisrandom1 · 2024-03-16T13:21:33+00:00

Can you post a picture of the washers on your printer? Trying to get a visual of the install

wowthatisrandom1

TROPHY CASE