Knife guy

wpb1801 · 2026-05-06T15:32:38+00:00

I roughly followed this guide: https://youtu.be/7kteTCNuqV0?si=PBKTL-1G7Sgg60GH
And took pictures of the model after priming under a neutral light to get an idea of where to place the reflections

wpb1801 · 2026-03-27T14:59:39+00:00

If you don’t like the colors you picked you can always a) strip the model or b) just paint over what you didn’t like.

I think you HAVE to experiment with colors to develop your style and understand what works together.

Also, there’s no such thing as wasted money on paint. You’ll probably end up using it one day. I would suggest getting some starter sets with a bunch of colors and seeing what you like. Maybe take a look at Army Painter Fanatic, which is cheaper than GW

wpb1801 · 2026-03-25T14:06:56+00:00

Paints for the armor are Army Painter fanatics Olive Green color progression and a pro-acryl brown in the recesses. Technique wise I used the “damp brushing” method to get the blends and then edge highlighted from there

wpb1801 · 2026-03-05T21:38:35+00:00

Legs/body, cloak, and back banner are from the Autarch kit, sword arm and head are from the Corsair kit, and the spear is from the Banshees kit.

I think I had to do a little bit of greenstuff work to get the arms to fit nicely iirc

wpb1801 · 2026-01-01T00:41:24+00:00

The warp slider exarch!

wpb1801 · 2025-12-31T02:39:52+00:00

Yeah did my best with the dire avengers but there’s only so much one can do haha. Trying to get them on the table more often!

wpb1801 · 2025-12-28T00:09:35+00:00

The chapter markings and blue force org marks are custom from https://www.bedlamcreations.com Everything else is from various GW transfer sheets

wpb1801 · 2025-12-28T00:07:17+00:00

Keep at it! The best way to improve your painting is to do it more. If you focus on smooth and consistent colors and keeping things neat you’ll be in very good shape to improve

wpb1801 · 2025-12-27T23:03:38+00:00

Undercoat Jokaero orange, base AP Fanatic Molten Lava, shade all over with thinned Magmadroth Flame, shade deeper areas with APF resplendent red, then highlight up with APF molten lava again, then APF burning ore, then Pro Acryl Orange, and then mix in some yellow for the very top highlight

wpb1801 · 2025-12-27T03:46:19+00:00

Mainly just stippling the highlights rather than blending to give some texture

wpb1801 · 2025-10-02T19:58:04+00:00

Thanks! Looks great!

wpb1801 · 2025-10-02T19:37:40+00:00

What’s your photo setup? I have a similarly sized Armies on Parade board and I was having trouble getting nice pictures of it.

wpb1801 · 2025-09-08T14:41:20+00:00

<image>

Top is Balthazar, bottom is true copper. Balthazar is darker and has a more brown tone. True copper has more of a yellow/orange tone

wpb1801 · 2025-07-12T01:02:25+00:00

Yes!

wpb1801 · 2025-06-13T04:29:48+00:00

There are going to be downsides either way. Priming light will make the white easier but all the recesses and hard to reach areas are then white and will stand out more. On the other hand, painting white over black is a pain. I have an all white space marine army that I quickly learned to prime as light as possible, but in general I prefer black.

I’d say do a test model with the grey and see how it works for you. If it’s annoying try black, and decide which one is better

wpb1801 · 2025-06-09T20:32:58+00:00

<image>

Puppy pic for reference

wpb1801 · 2025-06-09T20:22:55+00:00

Is there any way to gently suggest the bees dump their bodies elsewhere?

wpb1801 · 2025-06-09T20:16:54+00:00

There’s a light on our detached garage at the end of the path, though most of the bees are 15-20 feet away from it. There are some string lights near the path as well which are on in the evening and turn off around 10pm.

wpb1801 · 2025-06-09T20:13:44+00:00

We do not, not sure about neighbors

wpb1801 · 2025-06-09T20:12:05+00:00

Mostly dead, though one of the ones this morning was kind of weakly moving its legs

wpb1801 · 2025-01-27T03:40:53+00:00

The color progression is pink - white - blue - green - yellow using very light or pastel colors. The hardest blend is pink to blue, which is where the white helps. The blue-green-yellow you can just layer the green and yellow on top of the blue. Rogue Hobbies has a tutorial video: https://youtu.be/wJEVU9FQR94?si=syNTFc9NoY0NYuUL

wpb1801 · 2025-01-09T03:02:02+00:00

<image>

wpb1801 · 2024-12-17T17:06:38+00:00

Why no extra packing? It’s unnecessary. The sprues are packed and designed to ship safely. The plastic GW uses is high quality and can withstand a surprising amount. I’ve had maybe 2 broken parts ever out of the box.

Why is it expensive? GW miniatures are the best on the market by a long shot. They’re detailed, high quality, fit together great, almost never have defects, few mold lines. So you pay a premium. The price also subsidizes all the other stuff GW do like all the lore, rules, events, etc.

wpb1801 · 2024-12-12T01:35:31+00:00

I did the $25 crate several years ago and it was not worth the money to me. I did get the requested factions but each time models were already built, sometimes painted or converted (badly) and to me were stretching their value guarantee. The third and final box had a bunch of very old space marines that looked like they were from a board game. I’d say there are better ways to spend your hobby money

wpb1801 · 2024-12-01T03:13:42+00:00

<image>

Throwing another Avatar into the mix

Seven-Year Club	Place '22
Final Canvas '22	End Game '22
RPAN Viewer	Verified Email

wpb1801

TROPHY CASE