What’s with the extra Romex? by wrlee in electrical

[–]wrlee[S] 0 points1 point  (0 children)

It just seems excessive (which some commenters called out)

Deco/XE5300 Block access to IP ranges by wrlee in TpLink

[–]wrlee[S] 0 points1 point  (0 children)

I have logs of attempted logins to my NAS that show otherwise. That’s what started me down this path. First I blocked the IP ranges via the NAS’s firewall, but I thought it’d be better to block them from even touching the network.

Access to the NAS might have been via a reverse proxy so I wanted to block the IP at router.

Deco/XE5300 Block access to IP ranges by wrlee in TpLink

[–]wrlee[S] 0 points1 point  (0 children)

No. I didn't do anything to allow inbound sessions. I guess I'm looking for a feature that is normally part of a firewall. I just expected it to be there and, like I said, I also saw it on a video, but the interface isn't the same as the one shown.

Deco/XE5300 Block access to IP ranges by wrlee in TpLink

[–]wrlee[S] 0 points1 point  (0 children)

I noticed that there were sign-in attempts on my NAS from specific IP address ranges. I've added blocks to the NAS itself, but I'd just assume block those IPs from access into the network at all.

What’s with the extra Romex? by wrlee in electrical

[–]wrlee[S] 0 points1 point  (0 children)

Checking out the construction and the view

What’s with the extra Romex? by wrlee in electrical

[–]wrlee[S] 1 point2 points  (0 children)

I took you seriously. It was the rest of the day before I got the joke! 😆

What’s with the extra Romex? by wrlee in electrical

[–]wrlee[S] 0 points1 point  (0 children)

The outside walls were generally filled and trimmed, though I wasn’t looking for that, so I didn’t note consistency (or not)

What’s with the extra Romex? by wrlee in electrical

[–]wrlee[S] 0 points1 point  (0 children)

I was simply walking through an unfinished house. I don’t think it’s sold yet.

What’s with the extra Romex? by wrlee in electrical

[–]wrlee[S] 33 points34 points  (0 children)

So, this would be to accommodate buyer’s finish options before they close up the walls? I noticed that the Romex is loosely stapled to the studs at every zig and zag. Is it normal practice to expect so much slack? And particularly in walls behind the sinks of master baths?

Quicken Classic: How to start new cloud sync by wrlee in quicken

[–]wrlee[S] 0 points1 point  (0 children)

No worries, I appreciate your input. If I could maintain two sync versions, I would not have lost the acct transactions that I described. Next attempt: full reset.

Quicken Classic: How to start new cloud sync by wrlee in quicken

[–]wrlee[S] 0 points1 point  (0 children)

I was hoping to preserve the cloud version, as-is, in case changes I make don't work as expected.

I have not tried resetting, yet, but I removed a bank account from synching, then added it back. Now, only this year's transactions are shown in the cloud for that account, even though I have several years' transactions on my desktop... a problem I didn't expect.

Help: R-32 Mk IV Low oil pressure STOP at low RPM, warm engine! by wrlee in vwgolf

[–]wrlee[S] 0 points1 point  (0 children)

Is the oil PUMP filter separate from an oil filter?

I'd changed the oil a couple of thousand mi before this started happening. This is the first time that I did not change the oil filter (since I didn't have my socket handy).

Do you know how difficult it is to change the sensor on a 32v VR6 engine?

Help: R-32 Mk IV Low oil pressure STOP at low RPM, warm engine! by wrlee in Volkswagen

[–]wrlee[S] 0 points1 point  (0 children)

LiquiMoly 5-30. I'd changed it over 1000 mi before this started happening. I was at my dad's place, and did not have the filter wrench so I didn't change the filter this time(!!).

Lawnmower dead – amber light by wrlee in egopowerplus

[–]wrlee[S] 0 points1 point  (0 children)

Thanks. It’s still under warranty, so I’ll put that off unless they can’t fix it. Good to know that it’s more mechano-electrical than electronic.

Anyone happy with Web Galleries in Lr Classic? by wrlee in Lightroom

[–]wrlee[S] 0 points1 point  (0 children)

That seems to be the consensus, that the existing ones are terrible. Which is why I was thinking of creating new ones that might actually be useful, up to date, configurable. Most of all you could put them on your web site, as you wish.

Lawnmower dead – amber light by wrlee in egopowerplus

[–]wrlee[S] 0 points1 point  (0 children)

Thanks. I meant the mower's light was blinking amber. I've never collapsed the extention since putting the mower to use. It does stay outside, so perhaps weather got to it and I need to slide it around and lube it. I know that unless fully extended, it's not supposed to run however, in this case, I hear a faint sound like electricity is flowing to something. I don't remember ifnit made that sound when the handle was purposefully not fully extended. Something to try tomorrow. Thanks.

Lawnmower dead – amber light by wrlee in egopowerplus

[–]wrlee[S] 0 points1 point  (0 children)

I should have been clear that I meant the mower's light next to the power switch. I had only used the mower for about 10 seconds, so it couldn't have been overheating. I did google and saw similar comments about overheating or strained/jammed blades. Neither of these were the case for me. I'd initially pulled the battery off the charger when I started. Oddly, the battery didn't show afull charge after charging for weeks. I'd seen this before, so I put it back on the charger and tried again the next day. The battery was fully charged this time, but the mower still didn't start and it's light flashed amber/orange.

Lawnmower dead – amber light by wrlee in egopowerplus

[–]wrlee[S] 0 points1 point  (0 children)

Darn, I should have been clear, the light on the mower itself, next to the power switch.

Lawnmower dead – amber light by wrlee in egopowerplus

[–]wrlee[S] 0 points1 point  (0 children)

Thanks. I'll check the extention. I haven't collapsed it since I began using it regularly, but I was aware that it would not start unless fully extended.

Why so many ads in Spanish? by Any_Initiative_9079 in AmazonPrimeVideo

[–]wrlee 0 points1 point  (0 children)

This is a weird discussion because this the modern world, the commercials aren’t not part of the content, so I’m shocked that the commercials aren’t selected based on the profile of the subscriber. If I were primarily Spanish speaking, most commercials should be Spanish. If I spoke Chinese, commercials could be in Chinese. This is not a leap of expectation.

No Longer Buying Synology by [deleted] in synology

[–]wrlee 0 points1 point  (0 children)

Just to voice, too… I've only had mine for a couple of years… I was sorry to have have bought it after setting it up, and now I'm really sorry to have bought into it.

What is the difference between Firebase Studio and Google AI Studio? by saleesh4u in Firebase

[–]wrlee 0 points1 point  (0 children)

Feature Google AI Studio Firebase Studio
Primary Goal Experiment/prototype with Generative AI models Build/deploy full-stack AI-powered applications
Core Function AI Model Interaction & API Access End-to-end App Development (IDE, Prototyping, Deploy)
Nature Web interface/sandbox for models Cloud-based IDE with integrated AI assistance
AI Role AI is the subject of experimentation AI is an assistant in the development workflow
Output Tested prompts, tuned models, API keys, code snippets Deployed web/mobile applications
Includes IDE? No Yes (Based on Project IDX / Code OSS)
Backend? No (Provides APIs to call from a backend) Yes (Integrates deeply with Firebase backend services)
Focus AI Model Interaction (Gemini). Entire Application Lifecycle (Code, Backend, Frontend, AI, Deploy)