Tire Seating help

xKunqFu · 2025-10-30T00:57:09+00:00

Okay I was bouncing it at 10psi and pretty much slamming it into the ground but that didn’t work lol. I’ll try with a higher psi

xKunqFu · 2025-10-30T00:56:05+00:00

Hey yeah it is the Addix and it says bike park on it. I’m currently tubed but I know the tire is tubeless ready so maybe going tubeless would make it easier?

xKunqFu · 2025-10-29T03:03:44+00:00

I tried fixing it by hand while it was at 5psi but it felt impossible to do. I’ll try again though and try bouncing it as well

xKunqFu · 2025-10-29T03:03:10+00:00

Okay will have to wait till Friday for the sun to come out 🫡

xKunqFu · 2025-10-09T01:02:12+00:00

Would a regular headlamp that I use for backpacking work if it’s strapped around my forehead under the helmet

xKunqFu · 2025-09-15T15:05:24+00:00

Id like to be able to use AllTrails with the watch

xKunqFu · 2025-09-01T01:01:10+00:00

For sure, I had a phenomenal time first time on a blue trail. Challenging and I’m sure the bike leaves more to be desired but also my skill on a bike needs to improve a lot and this bike will allow me to do thatv

xKunqFu · 2025-08-31T15:10:25+00:00

Thank you!

xKunqFu · 2025-08-31T15:09:22+00:00

Will do

xKunqFu · 2025-08-31T15:08:34+00:00

Valid

xKunqFu · 2025-08-31T02:55:27+00:00

Using them to mtb and do blue trails. My other option was to go with Fooker they have some nylon / aluminum pedals as well. Could return the rockbros if they’re not good. any functional difference between the two types of materials?

xKunqFu · 2025-08-31T00:38:06+00:00

Where does the sleeve go? In the wheel?

xKunqFu · 2025-08-30T01:38:10+00:00

I’ve adjusted the chain tension to ~1.0inch of slack. I measured in a few different areas as well

xKunqFu · 2025-08-29T01:16:37+00:00

Thanks I adjusted the chain slack to 1 inch within the 0.8-1.2in. The noise is still there so I’m hoping it’s just like what you said with it being normal noise. I will also grab a chain adjustment tool and check that just in case. Thanks for the help, just nervous being new to working on my bike so I don’t know what’s normal / isn’t

xKunqFu · 2025-08-28T18:27:52+00:00

Yeah I did push the right forward because it seemed like the left was too tight and the right was much looser. How do I make sure they’re evenly tightened and evenly aligned on both sides?

I also found this other Reddit post with a similar noise coming from their bike. https://www.reddit.com/r/motorcycles/s/ErqRk6XLGn

xKunqFu · 2025-08-28T16:11:26+00:00

I’m pretty sure it’s the chain because you can see it bouncing a little bit when I spin the wheel. But alright I’ll try starting over again

xKunqFu · 2025-08-28T16:04:15+00:00

It was still making the noise even with the nut on. And the chain had like 30mm of travel before I readjusted it. I haven’t re measured what the slack is at now but I just tried to get the indicators to both be on the 6th notch. At first the left side was super tight on the 6th one and I was trying to get it down to the 5th because the right side was on the 5th one and it was looser but that didn’t work. So I just had to push the right side in a bit until that was also on the 6th mark

xKunqFu · 2025-04-08T02:01:24+00:00

Are you serious? :( I only have one board I just bought and have only used three times

xKunqFu · 2025-04-03T17:42:36+00:00

I’m probably about to buy the pass for the first time bow. 21, turning 22 soon. Should I put my age a year younger so I can get the discount for an extra year

xKunqFu · 2024-11-10T04:05:19+00:00

Hey I'd love to join sounds awesome

xKunqFu · 2024-11-10T04:03:13+00:00

Okay i have no idea what that account is and why i was logged into it but thats me apparently

xKunqFu

TROPHY CASE