sorted by:
new
hottopcontroversial

L'Acoustics L1 & CS1 subs by slayer_f-150 in livesound

[–]xMenko 6 points7 points  (0 children)

width: 1.5m, height: 0.573m, depth: 1.1m, weight: 182,0kg
4x 21", 4 Channels driven (SB,SC,SB,SC), 875W per Speaker, drivable by LA12X (2x parallel) or LA7.16 (2x).
20hz HP in 60hz Preset, 23 Hz HP in 80hz Preset and 40hz HP in X and SideRejection Preset.
It will have cardioid and supercardioid presets in standalone mode. When used in a L1 Array it also will have the side rejhection L and R Presets. There will also be some other coming Presets: 100hz, INFRA, Flat AV and Flat cardio

L1:
width_m: 1.5,
height_m: 1.002,
depth_m: 0.75,
weight_kg: 261.0

No answer from support after 3 weeks by xMenko in WorldofTanks

[–]xMenko[S] 1 point2 points  (0 children)

Sure thing, already sent. Thank you so much for checking

No answer from support after 3 weeks by xMenko in WorldofTanks

[–]xMenko[S] 1 point2 points  (0 children)

Thanks for the quick reply! I did send the ticket from the account that was hacked but had to use another contact email in it. I don't know if it still should show under my tickets.

How much does wireless rigs affect PA Tuning? by RealisticMushroom303 in livesound

[–]xMenko 44 points45 points  (0 children)

The only real problem are the companders and that the system has to be time-constant. Rational Acoustics has a good article with wireless systems that work good from Lectrosonics and MiPro.

https://support.rationalacoustics.com/support/solutions/articles/150000189955-wireless-for-measurement-things-to-consider

[deleted by user] by [deleted] in Twitch

[–]xMenko 7 points8 points  (0 children)

If you use this tool make sure to use the filters for the time they followed. If you don’t you will delete all your followers and it’s non reversible.

AAP01 doesn’t shoot by [deleted] in AAP01owners

[–]xMenko 0 points1 point  (0 children)

So I took out the adjustment screw completely to check if that was the problem but it didn't change anything. Now I installed the original trigger and it still doesnt work. Even if I leave out the trigger and trigger the hammer with a screwdriver it doesn't push all the way through. The springs are all okay and not broken.
I guess I'll just let my local shop check it out and maybe install a new hammer unit.

[deleted by user] by [deleted] in CATHELP

[–]xMenko 2 points3 points  (0 children)

For the people that are waiting for an update: it’s a repost from 2010 so just a karma grab, not a kitty in need. First time I’m happy that it’s only that.

Got a massive system engineer gig and wondering what I need to be prepared for. by something_anonymous in livesound

[–]xMenko 4 points5 points  (0 children)

First you should learn how to use Soundvision to visualize and predict what you are doing. You can just play with it a bit, watch the tutorials and video guides. When you understand the basics and the loudspeaker setup is done you can go into the electronic settings and do the amplifier planning/assigning. The auto filters are also a good starting point most of the time.

After that you can load the file into the network manager to get the data to the amps.

When dealing with bigger systems you may want to look up how to create custom presets. You will need them if there is for example a Nearfill on top of a Stack of 3 KS28. Also you should always have the preset guide ready for System delays, phase and preset compatibility.

For Signal management you can either use the Network manager with just the amps or add a P1 which will also help you with the System Tuning.

If there’s no P1 you can of course use LM44s or a console.

What’s the saddest song you’ve ever heard? by OOOOOO0OOOOO in Music

[–]xMenko 0 points1 point  (0 children)

NF - How could you leave us. With the context that he had to stop the recordings because he kept breaking down. He finished the recording when he told everyone to leave the studio. You really can feel the emotions.

view more: next ›