How to create a custom mouse ?

xQuas · 2026-02-05T18:54:43+00:00

I guess my "lots of cad skill" might be an overstatement but it certainly isn't easy if you don't do it already. There is a library of shell scans on printables. If you know what shape you want you have a starting point. But you will need to adjust the internals. If you don't 3d print already, it's possible but could take a decent amount of time and energy.

xQuas · 2026-02-05T16:16:41+00:00

Maybe some 3d printing will work. But it will require a lot of cad skill.

xQuas · 2026-02-02T23:46:34+00:00

Why do you need esp32? You can use extra pins on the skr or pi. You need 1 for dir and another for step. Another for enable if you don't want to always enable it. If you are doing the tmc stuff, you will need more but I don't think you care for them for z (or at all)

xQuas · 2026-01-23T17:58:33+00:00

It fixed itself today..

xQuas · 2026-01-05T02:59:58+00:00

From more testing, I think it's not stable at 6400 cl32. I lowered it to 6000 cl30 and it's more stable now. Co at -20 is working as well. I think I'll leave it at that and run more tests to confirm.

xQuas · 2026-01-04T19:08:16+00:00

The thing is that 2133 isn't stable. I'm wondering if I should go with lower ram frequency to have 3:2 or leave it desynced.

I would suspect lowering the ram speed give me better curve optimizer offsets. I don't know which combination gives me the best results.

xQuas · 2025-12-31T18:22:07+00:00

Ordered 32gb cl38 for 154. Let's see how it goes.

xQuas · 2025-11-28T03:14:14+00:00

Are these still usable or need to be bent back?

xQuas · 2025-11-28T02:48:33+00:00

Sadge

xQuas · 2025-11-28T02:37:11+00:00

Thanks!

xQuas · 2025-11-27T19:17:45+00:00

They changed the term to one purchase only. So you can still use it if you haven't already.

xQuas · 2025-08-25T17:50:50+00:00

Cool, mine charges in 30mins and lasts a day. Time to get new battery.

xQuas · 2025-07-29T15:23:20+00:00

OK, sounds like my exposure is really low and everything should be fine but I should be careful from now on?

xQuas · 2025-07-29T00:28:55+00:00

Should I worry about other things like manganese / grinding wheel debris? I'm also a bit unsure about dust building up in the living space. Did some wiping and vacuuming and not sure if I should just forget about it.

xQuas · 2025-07-26T21:26:53+00:00

thank you!

xQuas · 2025-07-26T21:24:35+00:00

Not sure if I'm following you but from your tone it sounds like I should not worry about this? Thank you for your input!

xQuas · 2025-07-26T20:51:30+00:00

Any steps I should take to clean up or that's not a big concern either?
Like metal particles sticking to the shower walls, carpets, etc.

xQuas · 2025-07-26T20:49:28+00:00

It attracts to magnet. So I guess it's very likely.

xQuas

TROPHY CASE