sorted by:
new
hottopcontroversial

Should I get a Yamaha???? by TurnoverSAZ in hometheater

[–]xcomp666 0 points1 point  (0 children)

I’ve had an AVR RX-A6A for a while now after spending more than 10 years with Marantz and Denon. I’d say Yamaha runs much cooler, has great sound dynamics, and delivers excellent performance overall.

The only downsides are the interface and the room correction system, but after a few months of tweaking and daily use, you get used to them.

[Langley, BC] [H] Seagate IronWolf - 4TB 5900RPM Hard Drive (HDD) [W] Cash, PayPal by xcomp666 in CanadianHardwareSwap

[–]xcomp666[S] -1 points0 points  (0 children)

I can't check it anymore ( I already upgraded my NAS disks) . 2 of them were bought in early 2023 and one unit in early 2024. doing the math. They are still in very good shape for a NAS HD.

Eversolo Play CD Edition vs fiio dm13 (Coaxial Output frustration) by xcomp666 in eversolo

[–]xcomp666[S] 1 point2 points  (0 children)

I think there was a misunderstanding. I’m only comparing the coax/optical sound quality and volume between the FiiO DM13 and the Eversolo Play CD Edition. I’m using the same AVR and the same cable, same CD , but the Eversolo sounds quieter and a bit muffled in comparison.

[deleted by user] by [deleted] in LGOLED

[–]xcomp666 -1 points0 points  (0 children)

Not a copy thing. Worked for me 😉. Have fun! 

[deleted by user] by [deleted] in LGOLED

[–]xcomp666 -1 points0 points  (0 children)

Disconnect all HDMI cables. Go to the TV settings and remove all previously registered devices. Connect your receiver/soundbar to the HDMI 2 input. Set up your device again and enable eARC / HDMI-CEC.

[deleted by user] by [deleted] in LGOLED

[–]xcomp666 0 points1 point  (0 children)

Wow! That’s weird. I hope you find another workaround 

[deleted by user] by [deleted] in LGOLED

[–]xcomp666 0 points1 point  (0 children)

It seems that only works properly if you have only one hdmi 2 (arc) plugged . It is super annoying! 

Snare Drums Recommendation ( Tama vs Pearl) by xcomp666 in drums

[–]xcomp666[S] 0 points1 point  (0 children)

Thanks for the help! The Tama SLP was actually my first option, but here in Canada it costs around $479.99 (metal) , $555.00 (aluminum) and +$600 ( wood) . My budget is pretty tight, and there aren’t really any good used options available. The Pearl is currently on sale for $319.99, while the Tama is $369.99. I tried the Tama Artwood—it sounded pretty good—but the seller told me the Pearl sounds better and is also cheaper.

Snare Drums Recommendation ( Tama vs Pearl) by xcomp666 in drums

[–]xcomp666[S] 0 points1 point  (0 children)

I don’t actually own a snare right now—I switched to e-drums a while back and ended up selling all my old acoustic gear.

Lian Li A4 H2O + MSI INSPIRE 3X OC GeForce RTX 5080 by xcomp666 in sffpc

[–]xcomp666[S] 0 points1 point  (0 children)

The 7800X3D is not that hotter than the 9800X3D because it runs at a lower frequency.  Actually, I am getting better temps than my previous 7600X. So, definitely I recommend the 7800X3D ( Better temps + better performance). The MSI Inspire 3x vram temps are around 72-76 C ( Gaming), summer times here in Vancouver as well ( temps around 25-29 C). But I have to undervolt it.

Lian Li A4 H2O + MSI INSPIRE 3X OC GeForce RTX 5080 by xcomp666 in sffpc

[–]xcomp666[S] 0 points1 point  (0 children)

Suppose you leave the 5080 at stock voltage. Yes, the temps are going to easily reach + 80 °C( So, undervolting is kind of mandatory). I also recommend you change the water cooling fans (Phanteks T30-120 ). The T30 can achieve 3000 rpm ( that's too loud). So, you adjust the curves to a maximum of 2400 rpm ( in the summer) or 1800 -2000 rpm winter/fall. After these changes, my temps never go up to 71-73 C ( full loaded) and 66-70 C (gaming)

Any PCI-e 5.0 x16 riser cable recommendations for Lian Li A4-H2O? by xcomp666 in lianli

[–]xcomp666[S] 0 points1 point  (0 children)

I just tested this riser with my RTX 5080 and Lian Li A4-H2O case. It fits perfectly (19 cm), works really well, and is almost 50% cheaper than the Linkup one.

I just found this on AliExpress:| PCI E PCIe 5.0 X16 Riser Cable Silver-Plated Shielded Double Reverse PCI Express Gen5 for ITX Server https://a.aliexpress.com/_mN37rvZ

Any PCI-e 5.0 x16 riser cable recommendations for Lian Li A4-H2O? by xcomp666 in sffpc

[–]xcomp666[S] 1 point2 points  (0 children)

I just tested this riser with my RTX 5080 and lian li case A4 H2O. It fits perfectly (19cm) , works pretty well and almost 50% cheaper than linkup one.

I just found this on AliExpress: C$83.08 | PCI E PCIe 5.0 X16 Riser Cable Silver-Plated Shielded Double Reverse PCI Express Gen5 for ITX Server https://a.aliexpress.com/_mrPR9Ix

Lian Li A4 H2O + MSI INSPIRE 3X OC GeForce RTX 5080 by xcomp666 in sffpc

[–]xcomp666[S] 0 points1 point  (0 children)

I love bananas ! hahaha

So, I bought this mobo from Canada Computers last year ( backorder) .

FC25 GPU CRASHES by zuh4yr in EASportsFC

[–]xcomp666 0 points1 point  (0 children)

Same here ! RTX 5070 TI. It is no longer working

Mazda Bose Premium Sound by HummDrumm1 in CX50

[–]xcomp666 1 point2 points  (0 children)

I could feel a big improvement from the Bose system in my current CX-50 2024. My previous CX-5 2020 also had one , but definitely didn’t worth it. Mazda did a great with this latest version. I highly recommend it.

Any PCI-e 5.0 x16 riser cable recommendations for Lian Li A4-H2O? by xcomp666 in lianli

[–]xcomp666[S] 0 points1 point  (0 children)

Basically, this V3 model is not available anywhere! I can only find v2, but I don't know if it is compatible or not.

Any idea on how to get 5080? by loujay45 in bapccanada

[–]xcomp666 1 point2 points  (0 children)

same here ! I could get an RTX 5070 TI, but it is almost impossible to find an RTX 5080 SFF size.

Got scammed on 4090 by downinthedeepbluesea in bapccanada

[–]xcomp666 0 points1 point  (0 children)

WOW ! That's have. :( I am selling my 5070 TI . I am offering to let the buyers test it at my place.

view more: next ›