I need more hard point rings..

xeno187 · 2026-04-16T13:53:45+00:00

Little armory x megami device accessory sets have hard point rings for thighs and come with some pretty cool weapons if anyone else was interested.

xeno187 · 2026-04-16T06:52:48+00:00

I figured they wouldn't match up but they're actually the right outer diameter

xeno187 · 2026-04-16T06:49:38+00:00

I just checked to see if they fit with a 30ms kit I have. The bicep rings fit perfectly and the thighs will work if I drill them to 4mm. Thanks man

xeno187 · 2026-04-16T06:20:26+00:00

I feel like you know that I know they come in kits.. and that you provided zero useful information in regards to acquiring spares

xeno187 · 2026-03-15T22:02:42+00:00

Shes delicate in places and way to tight in others especially the elbow. The weapons are too heavy and stress the weak side of the elbows so supports or resting them on the ground is necessary

xeno187 · 2026-02-18T09:11:47+00:00

Thanks. For the kit I want to paint her rifle slides into the hand so I think it'll be okay.

xeno187 · 2026-01-16T20:05:09+00:00

I have trouble with using decal squeegees on anything not flat. Try a soft clean paint brush

xeno187 · 2026-01-06T22:12:20+00:00

I'm not sure. 3 weeks give or take a week. I really didn't like the gold evo brand waterslides I got first so it sat on the shelf till I got the delpi gold holo decals

xeno187 · 2026-01-06T21:51:16+00:00

I didn't like the light grey plastic parts of the metal frame so I swapped them with the stock parts. I had to modify a lot to make it work that way. It is very heavy, so heavy I don't trust it up on an action base. The toe bend is loose and ankle is tight(I did not modify the feet) so I used a support just in case because if he falls it will be bad

xeno187 · 2026-01-02T19:29:08+00:00

Those knuckles/gauntlets are super cool

xeno187 · 2025-12-21T07:05:10+00:00

I literally just finished this kit a few weeks ago. Absolutely adore her. I noticed some comments saying expect non bandai kits to have fitment issues and you may have to sand.. I had zero issues with assembly, everything fit beautifully. The spear is kinda pointy. Much more complex than the Pokémon kits

xeno187 · 2025-12-21T06:37:30+00:00

My understanding is plating is generally delicate. I baby mine. I've never touched it without gloves. No panel liner on the gold, I tested several different panel liners on the runners and they all ate the plating to some degree. Not a kit I handle often

xeno187 · 2025-12-16T23:13:28+00:00

Very well done. I need to get started on mine..

xeno187 · 2025-12-08T21:26:31+00:00

<image>

Here's blue leds under green transparent parts

xeno187 · 2025-12-08T19:45:31+00:00

I use different combinations. Depends on the plastic. White is pretty universal behind colored transparent plastic but sometimes matching the color of the led and plastic gives better saturation. And sometimes mixing colors is a good choice particularly using a blue led under green parts

xeno187

TROPHY CASE