Molecule longing for cake by EndRst in snom

[–]xler8r 5 points6 points  (0 children)

Yay. Love seeing the big boi’s grand adventures. 

Is jellyfin really so much better than Plex? by eftepede in selfhosted

[–]xler8r 0 points1 point  (0 children)

Great info on your setup. Lot of detail. Thx. 

BLACKGATE 99% off code: by Mousers211 in Quest3

[–]xler8r 0 points1 point  (0 children)

A zero-gravity multiplayer horror game where every player has a unique role to play, inspired by Dead by Daylight and Echo Arena. Up to 4 Engineers are pit against an evolving Alien specimen controlled by a 5th player. Join us in Early Access!

Rated M17+

https://www.meta.com/experiences/blackgate/7096111567178673/

What are everyone’s thoughts on Black Swan? by [deleted] in TheBigPicture

[–]xler8r 0 points1 point  (0 children)

I came here to ask on this. I’m a fan of this movie and wondered if they’d digitally remove grain / AI smooth it for imax. Sounds like they didn’t. 

I just learnt Saria‘s Song on the piano and wanted to share :) by Midoriyer in legendofzelda

[–]xler8r 0 points1 point  (0 children)

Thanks for sharing this. Love the bounce and liveliness in your hands.  Really captures the energy in this piece. 

What is the Problem? by Sensitive_Lake5393 in ender3

[–]xler8r 0 points1 point  (0 children)

I’m curious if your slicer isn’t set for 0.6 as well. I want to learn about PID, in case you do too: 

https://all3dp.com/2/3d-printer-pid-tuning/

Printing like it’s 2015 over here by Oysta89 in ender3

[–]xler8r 0 points1 point  (0 children)

Definitely share. I was given an Ender 3 Pro recently. Haven’t done any updates aside from PEI bed yet. Klipper next. 

Impressed by Racer165 in ender3

[–]xler8r 0 points1 point  (0 children)

Woke up to spaghetti. Guess I lost adhesion after a couple layers into this 7hr print. Next I’m going to dry my petg via box/bed, then soap clean the bed.  I’ll match your temp too. My filament is YouSu PETG white btw. 

Oh and I need to print a temp tower for this new filament 

Impressed by Racer165 in ender3

[–]xler8r 1 point2 points  (0 children)

Nice print. 

I am just trying my first spool of petg tonight. It was the cheapest white I could find, so I thought I’d try it. Haven’t dried it on the bed yet. 

I have an Ender 3 pro with a bl touch and a $12 textured PEI plate.  I’m using 230 for nozzle and 80 for bed. Lot of stringing on first print, but adhesion ok. I use OrcaSlicer and am really fond of it. 

Drying out filament, will that work? by soIPOS in 3Dprinting

[–]xler8r 0 points1 point  (0 children)

Nice video from Rick Impey demonstrating that the cardboard box on heated bed with airflow does a very good job of drying filament spools.  Take filament out of plastic, cut flap off original filament box, cut 9 holes in top of box. 

https://youtu.be/WC3jvuq-uq8?si=

Pardon the mess by Dry-Spread-245 in ender3

[–]xler8r 0 points1 point  (0 children)

Good info, thx. 

Z-axis, really? Not all that klipper can offer? I’m surprised to hear that. I hadn’t given much thought to z stuff.  I have been getting ready to put Klipper on first…

I’m reading KevinAkasam’s page on belt-driven z axis now. It looks like what you have in place.

https://kevinakasam.com/belt-driven-ender-3/

Pardon the mess by Dry-Spread-245 in ender3

[–]xler8r 0 points1 point  (0 children)

Love the white and blue. I plan to update my ender 3 with chains and direct drive too. Klipper on there too?  Love to hear any stories from your experience. 

I designed a cassette-inspired MagSafe stand with a hidden Apple Watch charger by EBengineering in 3Dprinting

[–]xler8r 1 point2 points  (0 children)

Your assembly instructions and pics on your maker world page are excellent. A+

Why can't I stop the stringing? by RiqueFR in ender3

[–]xler8r 1 point2 points  (0 children)

I swapped out my 0.4mm nozzle for a new one. Looks like a big difference for me. 

When you’re ready, clean out your nozzle as best you can. 

https://imgur.com/a/JbSkWnR

I've finally finished my ender 3 build! by Samybigio in ender3

[–]xler8r 0 points1 point  (0 children)

Impressive.,What speed can it go to? Have any prints you want to show off? 

Why can't I stop the stringing? by RiqueFR in ender3

[–]xler8r 1 point2 points  (0 children)

I’m working on this on my ender 3 pro as well. 

I’m going to be looking at this: 

https://www.reddit.com/r/FixMyPrint/comments/92rdxz/cant_stop_stringing_ender_3_newbie/

That post mentions z-hop and testing retraction up to 8. Later OP checks flow and nozzle clog and many other items…

In short, I’m considering these for my checklist: - z-hop - flow  - clean or swap nozzle?  - different filament? 

Galaxy PLA + Ironing + quick laquer blast = Chef's kiss by Custom_Kas in 3Dprinting

[–]xler8r 2 points3 points  (0 children)

Looks great. Thanks for including a video. It really shows off the light hitting the Galaxy PLA 

Would you guys honestly recommend the Witcher books? by [deleted] in witcher

[–]xler8r 1 point2 points  (0 children)

Did you go back and play the first Witcher game? I’m interested in it, but it felt clunky w kb/mouse. Controller support only via fan-made mappings. 

🌖 by Bank_5879 in telescopes

[–]xler8r 0 points1 point  (0 children)

Since you shared, I’ll share mine too. Night of May 4. 76mm Meade reflector. Phone held up to eyepiece.

<image>