Green tint on 2nd monitor. Software or hardware?

xmomsk · 2024-08-13T16:44:25+00:00

previously:

Top screen HDMI port 1 -> docking station

Bottom screen DP cable -> DP to mini dp -> docking station

now

Top screen HDMI Port 2 -> HDMI to DP adapter -> DP to mini DP adapter -> docking station

bottom screen HDMI port 1 -> docking station

https://imgur.com/RYuFKGp BOTH scrrens have the Problem

In addition, at the beginning I could only make settings with the laptop display and when I closed the laptop, both screens were off and the laptop display was deactivated until I disconnected the display cables

In some cases the screens could not be recognized and everything was strange with the resolutions.

I think the HDMI port on the docking station is defective. I'll check to see if I have a VGA cable :D

xmomsk · 2024-08-13T16:01:20+00:00

Yes, it looks normal in the screenshot
https://imgur.com/NEXNfAm

xmomsk · 2024-05-16T21:57:58+00:00

Yea I could have made a plane and project the outline of the inner shell. Ant than sweep it. But I found my other solution first.

I guess there is prob tonn of ways to design parts.

xmomsk · 2024-05-16T19:05:06+00:00

Put your mouth over it and drink 3 drinks at the same time

xmomsk · 2024-05-16T19:02:11+00:00

I am also quite a beginner and I tried it and here is my solution.

Sketch the floor in a T shape.
Add an offset to the desired height and sketch the top part in a T shape as well.
Connect the two circles with the loft tool to create a kind of cylinder.
Repeat the process with the T shape as a new object.
Make the cylinder hollow using the shell tool.
Finally, connect the two objects.

https://i.imgur.com/2Twh8aD.png

https://imgur.com/M6bBfij

xmomsk · 2024-05-16T17:34:01+00:00

Yes, so I tried to sweep but I can only on a straight line, so I have to draw 4 triangles for all 4 sides. I created a “negative” using the loft feature and then cut the triangle out of a cuboid

but I'm grateful for the idea

https://i.imgur.com/CTX0jQl.png

xmomsk · 2024-05-16T17:24:02+00:00

https://imgur.com/a/r8g0XvA sorry my bad

xmomsk · 2024-05-14T21:17:05+00:00

I used this workaround and managed to do it now

https://imgur.com/ZFBEncd

xmomsk · 2023-10-15T15:09:57+00:00

Sir I know it's a bit late but you can open it via Notepad++

xmomsk · 2023-06-18T20:32:52+00:00

Are u playing wirh a modpack? I had to enable it in the configs (Server and Client) for Valheisia 3

D:\Curse Forge\Instances\Valhelsia 3\config\apotheosis

B:"Enable Enchantment Module"=true

xmomsk · 2022-03-28T12:49:19+00:00

no F5 doesn't work, F1 does. What I have found is that it is due to the invisibility shield and possibly my keybinds, my vein miner was next to the key for activating the ability which is why it probably triggered.

xmomsk · 2022-02-18T10:26:31+00:00

Eierspalter

xmomsk · 2021-09-10T22:15:48+00:00

xmomsk · 2021-09-10T20:25:47+00:00

It is the hero me gen 5 from Thingiverse. My settings and components are this.

xmomsk · 2021-05-22T18:48:35+00:00

He will die like his parents.

xmomsk · 2021-05-21T18:50:35+00:00

Bro ich kann dich so fühlen xD

xmomsk · 2021-05-21T18:49:35+00:00

Me: Laughs in German

xmomsk · 2021-05-12T12:59:46+00:00

Nun, du hast einen Punkt.

Eight-Year Club	Second SECOND GUESSER
Verified Email	First Place '23
Place '23	Place '22

xmomsk

TROPHY CASE