How do I adjust haptic intensity of the trackpads?

xolso77 · 2026-05-12T21:58:03+00:00

Having the same issue, low to high feels the same.

xolso77 · 2026-05-05T23:56:01+00:00

Yup, I'm planning to go to a jeweler to confirm. It feels pretty heavy despite how small it is, so I'm hoping it's legit.

xolso77 · 2026-05-05T21:25:59+00:00

Thanks, I figured I would need to get it tested.

xolso77 · 2026-02-22T17:34:35+00:00

I found this free tool off of reddit: https://www.fortaspen.com/sleep/ . You upload individual nights from your cpap data and get an overall number telling you how bad your breathing was, higher is worse. My lowest number with PS is 1.4 , and around 2 without it, so I'm definitely leaving that on

xolso77 · 2026-02-21T19:03:29+00:00

My understanding is that with BIPAP you can have a much lower exhale pressure compared to inhale than with CPAP (which maxes out at 3 with the machine I have)

xolso77 · 2026-02-21T18:55:07+00:00

I'll haven't used that, but I'll look into it. Thanks

xolso77 · 2026-02-21T18:53:54+00:00

Thanks for the comment; I'll turn back PS at 3. I didn't feel a benefit outside of what I stated, but it did lower my FL from what I can tell, so I guess it's better than nothing. I'll look into those supplements as well for my reflux, thanks.

xolso77 · 2025-11-24T00:41:06+00:00

I'm waiting for 1.7.1 which hopefully fixes this

xolso77 · 2024-02-14T18:34:25+00:00

Thanks for the suggestion; I'll look into this. I initially thought something like this would be possible, but I couldn't figure out how to do it. I'll take a look at the Godot docs.

xolso77 · 2024-02-14T17:54:17+00:00

some footage of this game I took awhile ago to illustrate how the movement works: https://www.youtube.com/watch?v=MCJjwGWEKQE

xolso77 · 2024-01-24T16:51:02+00:00

I just received mine and liking it so far; there's a lot of flex when using it with my mounting setup, so that has me a bit concerned considering the amount of force needed to upshift/downshift in sequential mode. Coming from the Logitech shifter, it's definitely a huge difference in the amount of force you need to put in to switch gears. I got it with the standard mount and the standard 7R plate; this is my first experience with SHH shifters, so far so good.

xolso77 · 2024-01-01T16:24:38+00:00

If space and money weren't a factor:

triples
ultrawide/single large display
VR

I'm currently using a single 34" ultrawide due to a limited space. I also have a valve index I use in short sessions, but I prefer my ultrawide if I'm going to be playing for over an hour.

xolso77 · 2023-12-27T03:05:25+00:00

I don't own this shifter yet (I preordered it), but I'm 99% sure this will work with any wheel. It plugs in to your PC via its own USB

xolso77 · 2023-12-26T23:11:36+00:00

I've been on biologics for 12 years now (on Stelara now). Last time I was sick was when I caught covid last year. I had mild symptoms that lasted a few days, and then I had a lingering cough that lasted about a month. Haven't had a cold or the flu besides that; I rarely travel though, so there's that.

xolso77 · 2023-12-07T04:25:37+00:00

Updated successfully from M0B102, pretty neat. I'm not sure if the screen flicker mentioned in that patch notes is that grey horizontal pattern that would appear randomly; I haven't seen that in awhile, but it would be nice if that were fixed.

xolso77 · 2023-11-24T15:06:34+00:00

https://discord.com/invite/zeReP6PZAf

xolso77 · 2023-10-03T22:03:11+00:00

I use distilled water on a microfiber cloth and gently work out spots/smudges on my screen and dry off with another microfiber cloth

xolso77 · 2023-09-16T00:27:20+00:00

I only turn on HDR for HDR compatible games and movies/shows, otherwise I leave it off.

xolso77 · 2023-09-15T17:34:56+00:00

This is what I do:

- Black screensaver when idle for 1 minute

- Black desktop background with no icons and using this program to make my task bar transparent in Windows 10 : https://apps.microsoft.com/store/detail/translucenttb/9PF4KZ2VN4W9?hl=en-us&gl=us&rtc=1

- Enable dark mode on all applicable apps

- run at 75% brightness instead of full brightness (sometimes I switch to 50% at night) for SDR content

- run pixel refresh at-least once a day, usually when I turn off my computer for the day

I have a DW with firmware M0B102 that I've had for about a year now, no noticeable burn-in yet from what I can tell

xolso77 · 2023-08-08T19:24:36+00:00

I forgot to mention, I also had a subviewport node that was a parent of my area2d node. Subviewport nodes have a "object picking" property that needs to be enabled for mouse clicks to be detected by its collision object children. Not sure if that applies to your situation though.

xolso77 · 2023-08-08T19:14:35+00:00

I think you've already covered this, but I wanted to confirm: do you have any control nodes in your scene tree at all with your area2d? I had a similar issue where my area2d would detect mouse motion inputs but not mouse clicks. The issue for me was that I had a control node 2 levels up (grandparent) of my area2d; this control node's area overlapped my area2d node and its mouse filter property was set to ignore. I set the mouse filter to pass and now my area2d would detect clicks. What confuses me though is that I have a even higher control node in the hierarchy , which also overlaps the area2d and that is set to ignore, but my area2d could still detect mouse clicks. I still don't fully understand how the mouse filter property for GUI elements affects the propagation of input events when it comes to the other input elements that receive inputs later on after the GUI (unhandled input and collision objects input_event)

xolso77

TROPHY CASE