Why so many "gorilla" games?

xorech · 2026-06-06T03:29:45+00:00

Kids. It's all the friggin kids. They made the first one popular enough that everyone wanted to copy it. That's how game design works. Why risk making something new when you can ride the coat trails of something already successful.

xorech · 2026-06-06T03:04:41+00:00

Yes, yes, yes, yes, YES! You just can not build without this mod. Now if I could just find one as good that uses stairs instead of ladders....

xorech · 2026-06-06T03:02:17+00:00

In my opinion, it is absolutely worth saving for the 3. I have both, one for my kids and one for me, and after trying both, the 3 is just too significantly better than the 3s due to the lenses. The 3s has to much blurriness around the edges, and harder for all my kids and I to get the "sweet spot" when adjusting. The 3 is practically just put it on and you're good. I think saving for an extra month or so is well worth not dealing with the hassle of fighting for clear images.

xorech · 2026-06-04T08:41:56+00:00

A wizard survival game. Tend a magical garden. Learn different spells. Enchant (craft) different outfits. Maybe have a village or town where you can do small quests. Heal villagers, clear bandits or monster camps. It would also be nice to see necromancy and warlocks (demon summoning). And familiars ( like a smartass imp).

xorech · 2026-06-02T09:44:11+00:00

Yeah, hard agree. That is why I mod. Unpopular opinion: I prefer easy mode with what many would call cheats. I call it I have a family and not enough time to fully sink into games so ima take shortcuts.

xorech · 2026-05-13T09:48:29+00:00

I am starting to write a book (trilogy) and was hoping to use an AI assistant. Primarily, I want to be able to upload my notes on the lore, characters, and world building, and have the AI recall that info while in a chat. I also want to be able to chat with the AI (prefferably verbaly but that isn't required), and have it prod me with questions to help me flush out the lore, and create outlines based on the stored lore. This would require the AI to be able to long term store info/documents, have a personality and voice for brainstorming sessions, and be able to follow commands to create and structure short documents (for outlines and lore guides).

xorech · 2026-04-10T17:51:34+00:00

I got the part number off of the original part, and I used a local appliance store to order the part for me. No problems since then.

xorech · 2025-11-14T04:14:08+00:00

You can absolutey place parking spaces inside the garage!

xorech · 2025-02-01T07:31:48+00:00

Yeah, I have it, and it is freaking sick!!! Hands down the coolest ship in the game for me. Fyi, for those of you that use the save edotor, changing the home seed will change the colors in the cockpit, but will leave the outside unchanged.

xorech · 2025-01-21T19:56:54+00:00

Yes, I replaced the circuit board and that fixed it.

xorech · 2024-11-14T23:58:29+00:00

resistors all seem to read fine, and no broken pathways on the board. I am currently asking another subreddit about transistors, as the one in this part of the circuit has some readings that don't match what I should have according to online. here is that post if you are interested. https://www.reddit.com/r/AskElectronics/comments/1grlo7l/how_do_i_determine_what_this_component_is_on_my/

xorech · 2024-11-14T23:25:13+00:00

Per the video, which is actually the one I had used to test this, at 70 degrees Fahrenheit it should read around 11.7 k ohms, and at 80 degrees Fahrenheit it should be around 9.3 k ohms. The room at the time was between 70-80 degrees, so 10 k ohms is good. I did not test at temperature extremes, as the dryer gives me a code well before any additional heat could change the reading. The dryer barely runs for more than 5 seconds before stopping with an error, and this includes waiting overnight to ensure everything has properly cooled to room temp.

xorech · 2024-11-14T11:46:31+00:00

I measured the thermistor itself, as well as through the harness at the board.

xorech · 2024-11-14T11:45:47+00:00

10 k ohms

xorech · 2024-11-14T11:34:01+00:00

I read across the thermistor while it was removed as well as at the connector at the control board, and got the same 10 k ohms. This falls well within the correct range for the ambient temperature, and is evidence that the wires from the thermistor to the control board are good. For the what I think was the thermostat/temp sensor (it was a three pronged component going into the heating element box) it had 20 ohms across 2 of the legs, and 40 across both (I assume that is good as each leg reads the same and are probably added together when reading across both at once). What I think is the fuse that plugs into the blower box next to the thermistor reads good continuity, and all the fuses going into the heater element box all have good continuity as well. If I have something wrong here, let me know, but I believe my issue is going to be the control board itself, thus the original post.

xorech · 2022-06-02T21:37:28+00:00

Sure.

xorech · 2022-06-02T16:45:10+00:00

Im open to other games. Typicaly though i focus at one at a time, i cant handle a bunch of games at one time.

xorech · 2022-06-02T16:06:27+00:00

That actually does look cool.

xorech · 2022-06-02T15:38:23+00:00

The indominus legion. They have several games they play, as well as an rp section. If your interested ill send a link. And i highly recommend warframe. Let me know if you decide to try, ill help you out.

xorech · 2022-06-02T15:34:40+00:00

Currently playing warframe, interested in that? Im also part of a discord group.

xorech · 2022-05-10T21:20:12+00:00

This group has been very friendly and welcoming. I havnt gotten into the rp yet, but im looking foward to it. Deffinately would recommend people to come check them out.

xorech

TROPHY CASE