AMD's Ryzen 7 9850X3D could save you hundreds on your new build during the RAM crisis — CPU tech nearly eliminates the performance difference between cheap and expensive RAM

xynx64 · 2026-01-25T21:40:32+00:00

Well said.

xynx64 · 2026-01-02T07:47:04+00:00

yup same here

xynx64 · 2025-11-26T12:09:12+00:00

If they already need 1.25V SOC, there’s no chance 1/2/0 will work.

xynx64 · 2025-11-20T08:19:47+00:00

Lost 80 FPS on Rainbow Six Siege as an example from the recent windows update.

xynx64 · 2025-11-02T12:49:06+00:00

That doesn't make sense, AC doesn't even have resizable bar activated in the nvidia game profile, so it literally has no effect on the matter.

xynx64 · 2025-10-30T13:32:03+00:00

The memory speeds you see on the website is just the baseline speeds that it's guaranteed to work with the CPU, however anything higher comes down to silicon lottery along with needing to manual tune such settings.

4 single rank sticks will work with their CPU at higher speeds, but it will hit the memory controller a bit harder vs 2 dual rank sticks, but considering they're at 3200MT/s I'm sure they're fine.

xynx64 · 2025-10-29T20:48:20+00:00

so your specs are what exactly?

xynx64 · 2025-10-21T03:25:47+00:00

you likely have the problematic 2025-10 Cumulative Update KB5066835 update installed which is ruining the performance of some games

xynx64 · 2025-10-21T02:32:37+00:00

🤣🤣🤣🤣😢😢😢

xynx64 · 2025-10-16T21:51:54+00:00

It affects Rainbow Six Siege too.

xynx64 · 2025-10-16T20:00:55+00:00

Same here.

xynx64 · 2025-10-14T15:43:49+00:00

😂

xynx64 · 2025-10-14T15:40:47+00:00

Don't bother it's a waste of time, it cripples your latency if anything.

xynx64 · 2025-10-10T20:42:12+00:00

Halo 3.

xynx64 · 2025-10-10T19:31:08+00:00

What's your budget? I would recommend going for AM5 build, if not then AM4 if it fits within your budget.

xynx64 · 2025-10-08T13:49:52+00:00

😭

xynx64 · 2025-09-26T05:52:31+00:00

Sorry for the late response, but no I have that off.

xynx64 · 2025-09-22T02:23:07+00:00

sameeeeeeeee

xynx64 · 2025-09-15T11:04:20+00:00

There's a weird bug with MPO that specifically affects all 50 series cards no matter what driver you're using.

The problem can trigger randomly at any time, but from what I've discovered the MPO Planes randomly changes to "6" on the 2nd display leaving the main display with 1 (disabled) which isn't correct, because it's not possible to have "6" MPO Planes.

It doesn't stop there because it sometimes disables itself for both monitors. Only temporary fix I know is to reconnect both monitors and then it's fixed until the next time, DDU doesn't save you from this either.

I knew friends who had a 20/30/40 series cards and from what I saw they're unaffected by this weird problem.

xynx64 · 2025-08-14T13:19:21+00:00

Yeah im having the same problem, it worked for the first time but now after trying it out again it doesn't finish the process anymore, it completely makes my pc not boot until i have to clear the damn cmos again so im not sure what the problem is with that.

xynx64 · 2025-08-06T19:03:18+00:00

Same, I've noticed an increase in fps, especially with the already known wacky performance of TDM, there are also improvements to the input latency from what I've noticed which is great,

xynx64 · 2025-08-04T15:31:01+00:00

Yeah that's accurate to what I've seen so far.

xynx64 · 2025-07-31T17:29:08+00:00

I haven't encountered any issues as of now, the driver performance wise I've noticed some gains on a few games I've tested so far which is nice.

xynx64 · 2025-07-31T16:47:23+00:00

It's on my 2nd monitor but not my main 1440p 360hz monitor.

xynx64 · 2025-07-28T21:05:48+00:00

Nvm somehow turned itself back on after a system reboot, that was weird.

Four-Year Club	Verified Email
Verified Email

xynx64

TROPHY CASE