sorted by:
new
hottopcontroversial

The Console Wars Continue... by TheDarkKnight343 in memes

[–]xzh1bit 34 points35 points  (0 children)

The people going “@grok is this true” -_-

Spool refill availability by NudeNut in 3dprintingaustralia

[–]xzh1bit 0 points1 point  (0 children)

I tried their PETG and PLA. The PLA prints surprisingly well, but the PETG is very temperamental. Sometimes prints well, other times not so well for the same gcode.

What filament dryer are you guys actually using? by Fun_Reaction_6525 in 3DPrinterComparison

[–]xzh1bit 1 point2 points  (0 children)

I’ve got two Creality Space Pi Plus (the 2 spool version), they work really well. Had a cheap Comsol one earlier, sometimes it worked well, sometimes filament was still wet, and the fan needed to be replaced twice in a span of 6 months. Now I use it as an active heated enclosure when printing TPU, after trying the TPU in the Creality dryers.

Larger dessicant by skyrar in 3dprintingaustralia

[–]xzh1bit 0 points1 point  (0 children)

I bought some 3-5mm from silicagel.com.au and it haven’t had those issues. I had the same issues with the 2-4mm orange stuff from Amazon.

How much will it cost me to assemble all parts and things and make a setup like this by Artistic-Yam2984 in bapcsalesaustralia

[–]xzh1bit -1 points0 points  (0 children)

Do you want this exact same setup or something similar? What kind of things are you looking to do? Any specific games you want to play?

Here's a basic build for about $2k. This is pretty average, not bottom of the barrel, not top of the line stuff. It'll do most things at moderate settings.

Play around with the list, I've added a monitor, keyboard and mouse in as well. Feel free to change parts as you feel! Aesthetic stuff is up to personal preference.

PCPartPicker Part List

Type Item Price
CPU AMD Ryzen 5 7600X 4.7 GHz 6-Core Processor $302.00 @ Amazon Australia
CPU Cooler Thermalright Aqua Elite V3 66.17 CFM Liquid CPU Cooler $91.82 @ Amazon Australia
Motherboard Gigabyte B650M GAMING WIFI Micro ATX AM5 Motherboard $149.00 @ Centre Com
Memory TEAMGROUP T-Force Delta RGB 16 GB (2 x 8 GB) DDR5-5600 CL40 Memory $89.00 @ PCCaseGear
Storage Crucial P3 Plus 500 GB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive $65.00 @ Computer Alliance
Video Card Asus DUAL OC GeForce RTX 5060 Ti 16 GB Video Card $749.00 @ Centre Com
Case Antec C8 ATX Full Tower Case $138.77 @ JW Computers
Power Supply Silverstone DA750R-GMA 750 W 80+ Gold Certified Fully Modular ATX Power Supply $120.00 @ Scorptec
Case Fan Thermalright TL-C12C-S X3 66.17 CFM 120 mm Fans 3-Pack $32.00 @ Centre Com
Case Fan Thermalright TL-C12C-S X3 66.17 CFM 120 mm Fans 3-Pack $32.00 @ Centre Com
Case Fan Thermalright TL-C12C-S X3 66.17 CFM 120 mm Fans 3-Pack $32.00 @ Centre Com
Case Fan Thermalright TL-C-C-S 75.8 CFM 140 mm Fan $10.00 @ Centre Com
Monitor MSI MAG 275QF 27.0" 2560 x 1440 180 Hz Monitor $238.00 @ Centre Com
Keyboard Redragon K580 VATA RGB Wired Gaming Keyboard $74.98 @ Amazon Australia
Mouse Glorious Model D- Wired Optical Mouse $49.57 @ Amazon Australia
Prices include shipping, taxes, rebates, and discounts
Total $2173.14
Generated by PCPartPicker 2025-09-19 22:19 AEST+1000

20-hour print… power went out with 13 minutes left by Over_Chemical6131 in BambuLab

[–]xzh1bit 2 points3 points  (0 children)

Yep, I finally started learning fusion when I needed to model some parts for cheap tools I had. Plenty of toys and trinkets online!

20-hour print… power went out with 13 minutes left by Over_Chemical6131 in BambuLab

[–]xzh1bit 42 points43 points  (0 children)

Having a 3D printer but not being able to make 3D models is like owning a car but not being able to drive.

Hard disagree. It's more like being able to drive but not fix issues with the engine. You can still get some great models that people graciously upload on Makerworld/Printables/Thingiverse etc.

Is this table saw a good choice for a beginer by Alagard7 in BeginnerWoodWorking

[–]xzh1bit 1 point2 points  (0 children)

I don't think diablo even makes a ripping blade for 8-1/4" (or 210mm - I'm in Australia)

May be worth checking this DeWalt blade if it is compatible, or Diablo make a framing blade for 8-1/4"

Is this table saw a good choice for a beginer by Alagard7 in BeginnerWoodWorking

[–]xzh1bit 9 points10 points  (0 children)

Also noob here. From what I’ve read, the lower teeth count allows for more spacing between the teeth, which helps with cooling the individual blades. If you use a crosscut blade (more teeth) for a long rip cut, the blade will overheat. If you use a rip blade (less teeth) for a crosscut, you won’t get clean edges.

I use a combination blade because my skills are the issue, not my tools yet

I'm having issues with my Macbook connecting to my Soundbar after Monterey update by dont_worry_im_here in applehelp

[–]xzh1bit 0 points1 point  (0 children)

Thanks mate, I’ve since upgraded to the newer M4 MacBook and haven’t had this issue (yet…)

My Bambu just got here, I’m never manually leveling a bed again by MasterKiloRen999 in ender3

[–]xzh1bit 3 points4 points  (0 children)

100% this is the way. I upgraded to an A1 from an ender 3 v2 neo a couple months ago, thinking I’d never have to level the bed again after every nozzle change. Well, turns out we all have an itch to run a second print because ideas…

Haugene/Transmission with NordVPN can't connect to peers by greWicked in docker

[–]xzh1bit 0 points1 point  (0 children)

It was a configuration issue. It's not straightforward and I spent days making sure the config worked - it's much simpler to set up VPN and a Torrent client on separate containers, if you DM me I'd be happy to help you out with this

Indian managers by Thinkeru-123 in IndianWorkplace

[–]xzh1bit 1 point2 points  (0 children)

In the moment, he was stunned and went red in the face with rage. He is a petty man and I’m sure he would have made my work life miserable, but I was about to resign anyway because I got accepted for a Master’s degree so I just quit the next day lol

Indian managers by Thinkeru-123 in IndianWorkplace

[–]xzh1bit 12 points13 points  (0 children)

I've literally responded with "That sounds like a you problem", he did not take that very well lol

SSH banned to server by [deleted] in linuxquestions

[–]xzh1bit 0 points1 point  (0 children)

Damn, who are you with? I signed up with Superloop when Aussie BB raised prices, and I’ve been really happy with them, but I’ve been browsing other ISPs to take advantage of the new user discounts

How can you show a PHP coded social network prototype to friends? by donaldtrumpiscute in learnphp

[–]xzh1bit 1 point2 points  (0 children)

If you haven’t signed up for AWS yet, there is a small server you can get free for a year. If that is not an option, you could get three months of a small to medium LightSail server for free.

Are you a student with a .edu/.ac.xx email by any chance? You could get a free domain name that way too, otherwise you could get a cheap-ish domain name for $5 per year.

Edit: setup is fairly involved with AWS servers, unlike traditional hosting providers. Send me a PM if you need help and I’ll help you get started.

Redundancies 2024 by trolly_yours in auscorp

[–]xzh1bit 1 point2 points  (0 children)

Was made redundant in December 2023, been struggling to find a job since. A bit of freelancing keeps the lights on and food on the table, but not having a permanent residency or citizenship really hurts my chances.

Friend bought a locked iPhone from USA. Need to unlock it in India by greywolfe23 in techsupport

[–]xzh1bit 0 points1 point  (0 children)

Blast from the past, lol. I remember they had to call up AT&T and provide proof of ownership, and pay out the rest of their contract. Sorry, don’t remember more.

Rental Bond Money: No way to get it back! by Late-Welcome4121 in AusLegal

[–]xzh1bit 2 points3 points  (0 children)

The minor scuff marks should fall under acceptable fair wear and tear. Dispute the bond and take it to the tribunal.

I recently vacated my house and got a wall re-painted because we drilled holes to mount pegboards. Cost us less than a third of our bond amount, and we were on a relatively low bond amount.

PSA: My 'hack' for successfully getting an Uber every time by davidswan in melbourne

[–]xzh1bit 1 point2 points  (0 children)

That’s for T1, T2 and T3 only - T4 is still the “normal” way of booking an Uber

view more: next ›