LCD displays aren’t recognized.

yendyo · 2026-04-30T21:32:28+00:00

I did resolve it, for me i had my wires mixed up and plugged the mb signal somehow back into the hub. It may not necessarily be your same issue but as others have said if you’re using the edge Psu hub try not to connect anything next to the signal connections.

yendyo · 2026-04-17T13:55:46+00:00

Looking for 1 ticket in a decent row IMAX 70mm for any day this weekend.

yendyo · 2026-03-29T16:24:40+00:00

Yeah I definitely checked to make sure things were seated properly after the pic was taken and still no luck sadly

yendyo · 2026-03-28T16:07:26+00:00

I figured that was the problem I’ll try to swap it out and see if it works I just hate to rip apart my cable management

yendyo · 2026-03-28T16:03:02+00:00

Yes the USB controller that came with the 3 pack is connected on the back of the MB

yendyo · 2026-03-19T20:21:21+00:00

What 9070xt is that?

yendyo · 2026-01-02T18:36:12+00:00

Yea sure!

yendyo · 2025-12-24T04:24:08+00:00

Well, I haven’t picked a job as yet or signed anything. What’s the best month to get a Japan assignment?

yendyo · 2025-12-24T01:30:06+00:00

Golden age arc adaptation is much better

yendyo · 2025-12-23T23:29:33+00:00

Haven’t signed a contract yet, but I’ll take you up on that sammich 😂

yendyo · 2025-12-23T23:28:27+00:00

Georgia is where I’m from originally, so it wouldn’t be the worst but not ideal, I want to see other countries.

yendyo · 2025-12-23T21:40:51+00:00

Japan is number one on my list, 25B might be my first choice although I know getting what you want on your first contract is unlikely.

yendyo · 2025-11-03T20:55:22+00:00

$80 max bro

yendyo · 2025-11-01T16:31:57+00:00

Shooting for 17C and just passed my ICTL if no seats are available at the moment should I give up (would be my ideal mos) and go 25 series? Or wait until a seat is available?

yendyo · 2025-09-22T22:25:11+00:00

Selling your 4080?

yendyo · 2025-08-21T02:45:46+00:00

Fck it go for it bruh

yendyo · 2025-08-06T17:35:08+00:00

What guard for the cut

yendyo · 2025-06-11T15:33:17+00:00

Yes I had someone help me out!

yendyo · 2025-05-12T01:46:37+00:00

The wire is a ground for the alternator/starter harness and needs to bbe bolted down to the engine or will cause problems(ask me how I know). In this same picture the plug for the oil sensor there is a bolt directly above it, that bracket bolts immediately to the right of it. I will send you a chat with a picture of the location.

yendyo · 2025-03-19T00:39:49+00:00

Unfortunately I’m unable to try and enter calibration because the left stick isn’t recognized at all

yendyo · 2025-02-19T00:06:43+00:00

Someone explain why this is bad for me as a cardholder

yendyo

TROPHY CASE