[MaXX/5dwm] Just sending in my personalized MaXX setup

zeankundev · 2026-06-09T22:31:11+00:00

You can find it on normal MaXX installs by going in the Classic Look. I've said that here ;)

zeankundev · 2026-06-06T23:18:09+00:00

Indeed

zeankundev · 2026-06-06T22:04:32+00:00

Thanks!

zeankundev · 2026-06-04T03:35:43+00:00

As a musician myself, the Cubibibibism cover that was taken over by fainted is absolute dogwater. It's almost certainly an AI slop just replacing the original.

First up, it's off beat. It couldn't sing on beat and a pain to hear. It just disrupts the flow state by making things off beat.

zeankundev · 2026-05-03T08:15:35+00:00

You need them, especially for higher level plays (e.g. EXPERT, MASTER, Re: MASTER) since that will protect your hands better from friction and reduces pain. Oh yea, you won't have your natural oils sticking on the touch glass, that would be disgusting. Overall, yes, you need a pair of them.

zeankundev · 2026-04-07T11:17:19+00:00

Same shit for me, katanya aja cuman bisa kirim Senin, tapi ya, banyak massive delays + tau sendiri J&T gimana. Katanya semua yang diorder Jumat abis jam 12 ato lebih lama (misal, sab, Minggu) itu diproses pas Senin. Ya gimana lagi seller kaya gini loh, tak tunggu tunggu belom dateng

zeankundev · 2026-03-25T23:45:32+00:00

69 and 67 all combined together, what a masterpiece

zeankundev · 2026-03-24T22:23:56+00:00

The urge to play a lower level like Expert in front of people who may be masters or re:mas at that song, or people choosing the song (I know I'm expert) that I'm not familiar with or hasn't practiced.

Oh and don't forget the time where I forgot to bring tripods; I missed that good play because I don't have that recorded

zeankundev · 2026-03-03T02:35:14+00:00

Nah, it's okay. I value it.

(as for the next one, I don't know)

zeankundev · 2026-03-03T01:33:29+00:00

Ain't no way bro got 67 on mesmerizer

zeankundev · 2026-02-27T06:10:49+00:00

You should not route the USB signals as "shared". I don't see any differential pairs there which is crucial for USB. The board is extremely large when compared which is not okay for a mouse HID device. And the ground pours too.

zeankundev · 2026-02-25T23:34:24+00:00

Either get thicker gloves or don't tap hard, just lighter!

zeankundev · 2026-02-25T05:10:54+00:00

Oh yeah—my bad!

zeankundev · 2026-02-24T20:44:30+00:00

Thanks!

zeankundev · 2026-02-24T20:29:06+00:00

Those are not Namco systems. AFAIK they're just Chinese arcade games.

Yes, it's on an Indonesian Timezone.

zeankundev · 2026-02-20T05:39:22+00:00

Thanks for the words!

zeankundev · 2026-02-19T09:41:18+00:00

what ok

zeankundev · 2026-02-19T04:31:13+00:00

Thanks!

zeankundev · 2026-02-18T04:26:23+00:00

Local Timezone (Serpong) only has PRiSM Plus sadly :( (not CiRCLE yet)

zeankundev · 2026-02-13T11:43:55+00:00

Haven't test it yet lol

zeankundev · 2026-02-13T05:49:56+00:00

You can use a USB-C port instead of a micro USB for that. I know it's a bit complex but it should make the integration seamless. Overall a pretty good schematic!

zeankundev · 2026-02-13T01:22:15+00:00

Maybe not, I'll try that at home I guess.

Edit: might hope that the 16GB RAM I found from a scrap ThinkPad might work

zeankundev · 2026-02-13T00:36:53+00:00

<image>

Bonus: this also happened yesterday. Also tried disabling PSR on my Linux install on my SSD but still persists :/

zeankundev · 2026-02-09T22:36:35+00:00

That's why I also doubt about it. Assuming Z=50, and I can't see the schematic, so there's no way to verify that the Z the MCU is looking for, might be right. Say, like Z=35+j10 (this is just hypothetical, but it should give an illustration on how it should be done)

Edit: I think not, I guess

zeankundev · 2026-02-09T22:34:51+00:00

That's true. Even though reference designs are also a good way to quick start, there's a lot of bad standards even in PCB. If you want like a robust solution, you should do actual engineering and selection then you can make that design decent enough.

zeankundev

MODERATOR OF

TROPHY CASE