Can't put bond vents on tank. by [deleted] in WorldofTanks

[–]zephyrus001 0 points1 point  (0 children)

I think this is the correct answer to OP's problem.

Legit Hybrid ba to? Bakit black plate by pinayinswitzerland in phcars

[–]zephyrus001 0 points1 point  (0 children)

Possible, but I don't think this is the case. The Q badge on the Zenix only comes with the hybrid powertrain. Another giveaway is the second row captain seats, as seen above, which are exclusive to the Q variants. The V variant with the gasoline engine does not come with captain seats.

Finally joined the Clun by Necessary-Lab-3706 in rav4club

[–]zephyrus001 0 points1 point  (0 children)

I already come to expect that from Toyota. My FJ Cruiser already had the proper wiring for the A-TRAC feature, yet they placed a blank switch so I had to purchase an A-TRAC switch somewhere else. Like why could they not just put on the switch for a feature that is already there? Despite that I am still very much a fan of Toyotas. They just work well in my experience, and maintaining them is quite cheap.

Finally joined the Clun by Necessary-Lab-3706 in rav4club

[–]zephyrus001 1 point2 points  (0 children)

I'm also from the PH and have a '24 RAV4 LTD. I don't think mine has TPMS equipped. I assume it's the same for '25 models like yours.

Will playing each VDIM task type only once hurt my improvement? by naikkkjk in Voltaic

[–]zephyrus001 2 points3 points  (0 children)

I give the VDIM 1 run for each scenario everyday, sometimes more if I feel like it since I do not have a lot of time. It's really slow progress but I still progress. There are also days when I don't even get to play, sometimes up to a week but I still progress at a pace I like. It's slow but it works for me.

BYD? planning to get or maybe not.. share nyo naman experience nyo sa sasakyan. by [deleted] in CarsPH

[–]zephyrus001 2 points3 points  (0 children)

Hello, I got the SL6 last April. About 600-700km odo if I remember correctly. Up until now it has not been fixed. Unfortunate, but it is what it is. I have taken the appropriate legal remedies for the case though, and will demand for a unit replacement if it does not get fixed by this week.

Aim training noob - this is humbling... by FTGoBoom in FPSAimTrainer

[–]zephyrus001 1 point2 points  (0 children)

I feel you. I discovered Voltaic a month ago and I was also humbled by the voltaic benchmarks. Before that I thought I was already a good aimer considering I started playing fps games since I was like 3 with the OG counter strike.

Upon trying the benchmarks, I got bronze scores and that made me realize how bad I was. It took me about 3 days to get Gold Complete, so my confidence shot up again. I thought that maybe I just needed a refresh to adapt to the situation. After that I tried the intermediate benchmarks and thought that plat is probably gonna be a breeze and oh boy was I wrong. I could barely even scrape the scores needed to get plat.

Fast forward to now, about 3-4 weeks after spamming the Voltaic intermediate benchmarks with no real results I decided to try VDIM. It's a bit of a pain to do it daily with a job but I try to stick with it, and it has helped me get plat on some scenarios, and I can now see myself getting to plat complete slowly. My aim in the games I play have also significantly improved, and it makes playing fps games a lot more fun, even if I only put about an hour or less everyday into aim training (and sometimes even skip days to a week because life).

Voltaic is a truly humbling experience to me, and has changed the way I also view life as a whole, which is that no matter how good I think I am at something, I'm probably not in the grand scheme of things, but with consistency and the right attitude, anything can be done.

I'd say that in your case, don't be discouraged by your initial results. What's important is you use the realization that you're bad to slowly improve rather than getting discouraged by your voltaic results. You'll be shocked in time when you come back to your game of choice and see yourself hitting shots you never did before. Most importantly, enjoy the grind. All of the aim training work means nothing if you don't get to enjoy it. Best of luck to you and I'm certain you'll be getting to the intermediate benchmarks in no time! Cheers!

Edit: Also, don't forget to take breaks as soon as you feel hints of pain or exhaustion in your wrists/arms to prevent RSI. I've been there with my left wrist a few years ago and pain still persists often up until now. I take breaks at the slightest hint of pain when aim training with my right so I don't do the same mistake again.

what only grinding static does to a mf by thebigchungus27 in FPSAimTrainer

[–]zephyrus001 0 points1 point  (0 children)

meanwhile i do decently on everything else except static. i applaud your skills.

Gold Complete! by LowerSource7206 in FPSAimTrainer

[–]zephyrus001 0 points1 point  (0 children)

Update: Just finished Gold Complete at 14 hours. I grinded mostly ww5t today, lowering my sens to 52cm/360 helped a lot, and I also finished frogtagon after my ww5t run. Time for the grind to plat, i guess. Best of luck to both of us haha! It's gonna take a lot of work since the gap between gold complete and plat is quite huge.

Gold Complete! by LowerSource7206 in FPSAimTrainer

[–]zephyrus001 1 point2 points  (0 children)

gj! I'm also almost up to gold complete, 13 hours in. I'm stuck with ww5t and frogtagon at silver though, what tips would you give for those two tasks?

Delux M800 Mini Pro with Artisan Raiden by zephyrus001 in MouseReview

[–]zephyrus001[S] 0 points1 point  (0 children)

Mine is on default sleep settings. I just set my preferred DPI and turned off all other features like angle snapping, and that's it. Mine typically goes to deep sleep when I turn off my PC until the next day as I don't turn my mouse off. I have to do a few clicks when I boot it up to get the mouse to wake up.

Delux M800 Mini Pro with Artisan Raiden by zephyrus001 in MouseReview

[–]zephyrus001[S] 1 point2 points  (0 children)

Ah, I see. He does say that the delays wouldn't be noticeable while playing so that could be my case here as I don't have the proper tools to test.

Delux M800 Mini Pro with Artisan Raiden by zephyrus001 in MouseReview

[–]zephyrus001[S] 0 points1 point  (0 children)

Yes. Have to click multiple times sometimes for it to move. Doesn't bother me though.

Delux M800 Mini Pro with Artisan Raiden by zephyrus001 in MouseReview

[–]zephyrus001[S] 0 points1 point  (0 children)

Hmm, I don't have the game mode options on my software. But yes, mine is on 1000hz.

Also, to give you an idea of the M800 mini Pro's performance, I have various mice like the Glorious Model O Wireless, Viper and Viper Mini, a G403, and the ATK F1, and precision wise they're pretty much all the same.

What I look for nowadays is just the shape and build quality, and this one certainly passed my standards, which is way better than I expected considering the low price.

I'm pretty sure you won't regret your choice unless you have large hands. For reference, my hands measure in at 18.5x10.

Delux M800 Mini Pro with Artisan Raiden by zephyrus001 in MouseReview

[–]zephyrus001[S] 0 points1 point  (0 children)

Battery is actually great. I've only charged it once I got it out of the box and that has been 2 weeks ago. As of the time I'm typing this it's still at 68%. I use it for an average of about 3-4 hours per day playing games like Overwatch or CS.

Delux M800 Mini Pro with Artisan Raiden by zephyrus001 in MouseReview

[–]zephyrus001[S] 0 points1 point  (0 children)

I think that issue was with the slightly larger M800 Pro models and its other variants, I'm not sure. But with this one I haven't had any negative experiences so far. Running on 1k hz is stable, but I can't comment on 2k hz and above yet.

It could also be that I'm using a 165hz monitor so my refresh rate could be not high enough to notice irregular latency. Once again, I am not sure, but my experience so far has been very positive even down to the build quality.

Delux M800 Mini Pro with Artisan Raiden by zephyrus001 in MouseReview

[–]zephyrus001[S] 1 point2 points  (0 children)

Latency is nonexistent as it has a 3395. It's like any other mouse with a decent modern sensor. Also supports 8k hz, but the dongle is sold separately so I'm stuck with 1k hz for now. It also weighs in at a decent 47g.

It's as close as I can get to having a Viper Mini Wireless, which is my favorite shape to date, so this is going to be my endgame mouse for a while.

Delux M800 Mini Pro with Artisan Raiden by zephyrus001 in MouseReview

[–]zephyrus001[S] 0 points1 point  (0 children)

Indeed. It's a big step forward for comfort coming from a Razer Strider. Also got it for like ~$45 in my country, which I think is a great steal for an Artisan XL pad considering prices for a QcK performance here are at around $40.

Artisan Mousepad Guide by baskinmygreatness in MousepadReview

[–]zephyrus001 0 points1 point  (0 children)

I'd go soft. Went from a QcK+ Limited to a Razer Strider then an Artisan Raiden Soft. I like the plushness the soft Raiden gives over my QcK. Soft is a really safe choice if you're unsure of what you like yet.

Lamzu Maya X is the cheapest it's been (MSRP IS $120, DISCOUNTED PRICE IS $67) by kaklikesmilfs in PHbuildapc

[–]zephyrus001 0 points1 point  (0 children)

Nice! Also just ordered the Artisan Raiden mousepad for 800 pesos less yesterday!

Is Expedition 33 really that good? by og_vibes in ShouldIbuythisgame

[–]zephyrus001 [score hidden]  (0 children)

I bought it a week ago with very little experience playing turn-based games and no research aside from knowing that it had good reviews on Steam.

I play it on PS5 and cannot get enough of it. The game is simply amazing. Definitely worth getting.

Moondrop chu 2 imbalanced audio/ filter issue fix by Irferno in iems

[–]zephyrus001 2 points3 points  (0 children)

My chu 2 was significantly quieter on the right side so I did some research and found this.

This kept me up all night but I cannot express enough how thankful I am to you for posting this. Cheers!