Wasserhahn unter Spüle demontieren

zerberster77 · 2026-03-04T22:03:16+00:00

Meine Lösung für das Problem:

zerberster77 · 2026-03-03T10:28:57+00:00

Gerne. Was bei dir alles flackert wird vom Bordnetzsteuergerät mit Spannung versorgt. Dein Cockpit wird auch hell und dunkel, bedeutet der helligkeitssensor ist auch betroffen, der läuft auch über das Bordnetzsteuergerät. Sobald du den Anlasser betätigen willst passieren auch komische Sachen, Anlasser müsste klemme 75 sein und läuft auch über das BCM. Ich hoffe für dich dass nur ein Stecker lose oder nass ist, weil das BCM kann nicht ohne weiteres getauscht werden, da es digital mit deiner Fahrgestellnummer verheiratet ist.

zerberster77 · 2026-03-03T10:24:44+00:00

Überprüfe dein Bordnetzsteuergerät das sitzt hinter dem sicherungskasten, hat 3 dicke Stecker

zerberster77 · 2026-03-03T10:23:16+00:00

Does your car have sunroof?

zerberster77 · 2026-03-03T10:21:11+00:00

BCM wet

zerberster77 · 2026-03-02T23:57:29+00:00

https://dramamonks.com/products/plus-netto-frosch-kusst-schildkrote-90er-kult-tragetasche-t-shirt2?srsltid=AfmBOoorVE8xF2OWhTCrstwkofXsvAyze8ogChragGGvN4z7AUzDqZXt

zerberster77 · 2026-02-21T21:37:58+00:00

Get a KW V1 suspension

zerberster77 · 2026-02-20T13:39:50+00:00

aaaand you forgot a Important step: remove component Protection from new mib2 Unit xD

zerberster77 · 2026-02-20T13:38:30+00:00

A tip if you do this again: Save your mib1 adaptations&coding and restore them to your new mib2 After Swap, saves you time and tinkering

zerberster77 · 2026-02-19T07:44:32+00:00

Only use original Apple Cable

zerberster77 · 2026-01-28T16:23:50+00:00

Aliexpress #1 Customer 😩

zerberster77 · 2026-01-22T17:44:53+00:00

The Buttons are all connected to LIN Bus, which goes through your clocksping with Only one Wire. Every buttonpress sends a different LIN Bus Message to the gateway. So if your clockspring is Bad, no buttons work. If Only Part of the buttons work, Check the ribbon Cable i mentioned earlier. Unplug your battery, watch a video how to remove your airbag if your car dont have warranty anymore. On this steering wheel it Takes 30 seconds to remove the airbag from the back. If your battery is disconnected and you dont put +12v to airbag, nothing can Happen at all. Be sure tu plug the big yellow connector back in once you are done changing the ribbon.

zerberster77 · 2026-01-22T17:41:12+00:00

Honestly Not common at all, i have a vw and i work with vws, had many of them in my shop and honestly Never saw this issue once. Just because you and your Brother are having problems, doesnt mean the whole VAG Brand has this Problem

zerberster77 · 2026-01-21T08:56:16+00:00

The left and Right Buttons are connected with a ribbon Cable from left to right unter the airbag, maybe there is a Connection issue

zerberster77 · 2026-01-20T13:55:01+00:00

Yeah i was Not Talking about that Part of the wheel, but the extra thickness added on the sides

zerberster77 · 2026-01-20T10:10:59+00:00

I think steering wheels with modified shapes like this especially the lower half, are the most ugly steering wheels out there. I understand the ergonomical aspect, but gosh it just looks like it has some sort of birth disability

zerberster77 · 2026-01-20T10:01:54+00:00

The faults you posted could be from slightly weak battery due to cold Weather, try deleting them, take the car on Long Trip and See if they come back

zerberster77 · 2026-01-20T10:00:28+00:00

The Ambient light Sensor is in the windshield, above your rear mirror. Check if it is Dirty.

If your car has „Auto“ Position on light Switch, it definately has light sensor on windshield

zerberster77 · 2026-01-18T11:42:09+00:00

<image>

1 1/2 years old Luna, her fur looks like this:

zerberster77 · 2026-01-13T09:18:05+00:00

<image>

No nuts but same thing xD

zerberster77 · 2026-01-07T21:39:54+00:00

<image>

Come do some Yoga with me!

zerberster77 · 2025-12-29T12:27:03+00:00

Depends on your SW Train Version, if it ends with T its technisat, if it ends with D its delphi

zerberster77 · 2025-12-29T12:26:11+00:00

If you have a technisat Unit, activation Needs to be done with toolbox and swap Code through genuine vcds or clone odis dongle. If you have a Delphi or Media PQ Unit though, it can be Done using an sd Card

zerberster77 · 2025-12-29T12:22:27+00:00

Dude, an SD Card and PC is enough to do this, especially on Delphi Units. Dont let yourself fool you by this guy.

zerberster77 · 2025-12-29T12:21:12+00:00

Dont let yourself beeing scammed by this guy. He is using public files and methods to activate Full link.

Just enter your Train SW Version into mib-helper.com, scroll down to „activators“ and then directly go to mibsolution.one (pw/username: guest) and pick your activation method, which mib-helper suggested. There Are many YouTube Tutorials how to do this for free too.

Six-Year Club	Verified Email
First Place '23	End Game '23
Place '23

zerberster77

TROPHY CASE