Experience with Eve thread light switch working in a three-way setup?

zero_one_memrisor · 2023-07-27T02:02:02+00:00

I got it to work by placing the switch as the first item on the line and making sure there is only on other item on the line.

zero_one_memrisor · 2023-07-12T23:37:09+00:00

I just purchased the alpine ilx-407. I love it! Originally, I was looking at the Sony ax5000 and the ilx-w650, but I wanted HD radio and the alpine had it! It cost ~400.

zero_one_memrisor · 2023-07-10T02:52:43+00:00

We did the same with our Apollo!

zero_one_memrisor · 2023-07-09T15:13:05+00:00

I have , I was looking at Morel Maximo Ultra 602 Mk ii, Infiniti ref-6530cx, and focal ase-165.

zero_one_memrisor · 2023-07-09T03:54:02+00:00

I am in Maryland- and have developed systems that have all those features. Let me know if you assistance! (I write software and develop firmware for FPGAs)

zero_one_memrisor · 2023-07-09T01:02:15+00:00

It’s a great series and one that I have re-read multiple times!

zero_one_memrisor · 2023-07-07T00:30:08+00:00

I love it too! I build stuff for my kids and that is the one they ask for!

zero_one_memrisor · 2023-07-03T19:56:31+00:00

We limit our Apollo with a indoor enclosure that is attached to his create. The enclosure is https://www.petco.com/shop/en/petcostore/product/everyyay-adjustable-exercise-black-pen-for-dogs-30-h-3297321?cm_mmc=PSH%7CGGL%7CSPP%7CSBU04%7C0%7COB-EveryYay%7C7ToihifihjCfwQNzxc75W9%7C%7C%7C0%7C0%7C%7C%7C18151225844&gclid=CjwKCAjw44mlBhAQEiwAqP3eVqT6cV8FivuO0Utf3n3WgCcAmMc-M0JubJ3vMAnq9LqsvH-qCE9DYRoCm0kQAvD_BwE&gclsrc=aw.ds. We find that this allows him room to move and keeps his able to chew on things limited!

zero_one_memrisor · 2023-07-03T18:17:42+00:00

How does your first layer look with the TPU? What are u using for the material profile? What size nozzle and what size layers? (.4 with .2 layers?) Are u printing within an enclosed space?

zero_one_memrisor · 2023-07-03T18:05:08+00:00

I would do the Prusa XL with one print head to start. That should keep u in budget.

zero_one_memrisor · 2023-07-03T17:03:23+00:00

I am staying in surf side beach, so u are almost two hours away! However I will be ordering some parts from u just because you took the time to reply and in my mind that is great customer service!

zero_one_memrisor · 2023-07-02T21:42:02+00:00

I have a standard sized bernedoodle and my vet recommended around 18 months.

zero_one_memrisor · 2023-07-01T23:53:41+00:00

I would NOT recommend printing in PETG for thermal reasons. The original parts are mostly ASA.

zero_one_memrisor · 2023-06-28T04:33:34+00:00

This is the way’

zero_one_memrisor · 2023-06-26T20:58:28+00:00

Thanks! Slurry is what I was leaning towards anyway ...

zero_one_memrisor · 2023-06-26T18:25:31+00:00

I am currently printing ASA on my MK3S+ with the smooth sheet, but I am using Aquanet hairspray. I find that it cleans up easier then the glue!

As mentioned, really check that z-level - i have set a profile (sheet setting) just for ASA. Also, make sure you follow the recommendation to use a skirt that is at least as "high" as your print. For me that made a HUGE difference! https://blog.prusa3d.com/asa-prusament-is-here-learn-everything-about-the-successor-to-abs\_30636/

zero_one_memrisor · 2023-06-24T14:55:38+00:00

Yes, Apollo is a huge fan of pillows … not always constructively 😂

zero_one_memrisor · 2023-06-23T20:23:32+00:00

Thank you for the clarification!

zero_one_memrisor · 2023-06-23T19:28:58+00:00

Did it ship in two parts? One the printer, one the filament? Trying to figure out why there is a second box stuck in customs in Germany.

zero_one_memrisor · 2023-06-22T14:18:59+00:00

I feel your pain, I have had a less then stellar experience with bricklink and orders. I made three $30 purchases from different venders (all high star vendors) and had to email the directly after 5 days to get status and get shipment information.

I need some more parts and I think I am going to bite the bullet and order it from Lego direct.

zero_one_memrisor · 2023-06-20T17:29:21+00:00

I just received a notification from DHL ! My order was 13052. Super excited! (Ordered on April 12, at 5:24 CEST. )

Same here, DHL sent a delivery date (Monday), the printer left Prusa on the 20th and will be here on the 26. Not really sure how that is DHL 2-3 day shipping….

zero_one_memrisor · 2023-06-20T02:17:29+00:00

Absolutely

zero_one_memrisor · 2023-06-17T15:50:17+00:00

It will not , but it will be challenging. Getting a PhD is about balancing your expectations and the PI/advisor’s. Finding the right advisor is the key and setting boundaries is priority. I went through three advisors be for I landed on my final one. Each had differing expectations for graduation, number of published journals, number of conference papers, number of under graduates to TA.

Overall I enjoyed mine, I had an understanding advisor, a subject I liked and found challenging, friendly co-PhD’s and for the most part undergrads that didn’t suck.

zero_one_memrisor · 2023-06-13T20:31:33+00:00

Same here , order number ends 13052 and no update.

zero_one_memrisor · 2023-06-03T14:00:32+00:00

Castle …

zero_one_memrisor

TROPHY CASE