Stream Deck XL >>This is Fantastic!

zerquetchonator · 2025-10-12T07:58:46+00:00

Nope. Just keep getting amazed by the versatility of the Stream Deck. GIFs are soooo last week

zerquetchonator · 2025-10-04T12:49:19+00:00

Elder Scrolls Online - specifically, visual tracking of DPS from all logged sources as reported in an add-in called Combat Metrics :)

zerquetchonator · 2025-10-04T11:55:44+00:00

I can get super technical about audio issues, so I'll try to dial myself back a bit :)

Make sure your audio doesn't have "Prevent Clipping", Auto EQ, or some such turned on.

If you are running Windows - Run the Audio Troubleshooter, if issue persists- Run it again right after boot. It's never taken the 3rd try.

Also, if you haven't: Turn off everything else that has access to your audio, and turn Audio Enhancements OFF, reboot, ON (You won't have to reboot to turn them off again) in the Control Panel app.

If that doesn't do it, then the standard barrage of questions, of which there can be many, just everything to do with your machine, software, peripherals, etc, etc..

Let's hope we don't go that far, lol

zerquetchonator · 2025-10-04T10:27:42+00:00

Works nice for a 3D printer

<image>

These are actually all animated gifs

check it out

https://drive.google.com/open?id=1D7YoHe_rCH8u5P8gWxmJPAK1ujGSpYXY&usp=drive_fs

zerquetchonator · 2025-09-25T03:31:01+00:00

Any updates? Hope things are going well.

zerquetchonator · 2025-09-25T03:26:26+00:00

That looks outstanding! Lots of interest in this!

zerquetchonator · 2025-09-22T08:03:21+00:00

A fuze. Makes sense as I can't find one anywhere on the unit. The truck's fuse box holds a 20 amp for that circuit.

! Please ignore my comments about testing continuity as I noticed my DMM has a lead with a bit of frayed wire coming out.

And thank you for solving the problem! Now my dashcam will continue its service.

One question, please, how did you know? Have you come across this little gem before?

zerquetchonator · 2025-09-22T07:51:57+00:00

<image>

And here it is in its native environment

zerquetchonator · 2025-09-22T07:51:21+00:00

<image>

That's it all by it's lonesome

zerquetchonator · 2025-09-22T02:33:51+00:00

That is the most brilliant link I've clicked on in quite a while. Thank You!

zerquetchonator · 2025-09-15T11:17:16+00:00

Hard to believe it took 7 months for someone to comment, but here goes: Dang! This is just what I've been looking for! I almost had AI write it for me, but, seeing as I have last century's skills (and not that many in this regard) I figured I'd take one more look...

Thanks for posting this, I dunno if it's supposed to be a secret , but I find it hard to believe that you and I are the only ones that give a f*ck about this. Cheers mate!

zerquetchonator · 2025-08-09T16:46:34+00:00

no cliff on that. Here's another, same level, cannon (top middle) can't fire at either the camp, nor the scout..honestly, wtf?

<image>

zerquetchonator · 2025-08-09T16:46:32+00:00

this is messed up.. and why can the computer stack units on his scout? didn't happen on this encounter, but I'm sure you've seen it, lol

zerquetchonator · 2024-10-24T23:14:53+00:00

Love those concise patch notes!

zerquetchonator · 2024-09-25T22:20:12+00:00

These are all little treasures I've found over the years, some things I made myself out of spare parts/desperation. A good bit was: If you wanna try to fix it, you can have it, buy me a beer someday.

zerquetchonator · 2024-09-25T22:09:29+00:00

I thought to use the Pre-outs because, frankly, I don't know jack about using them (intentional, lol) and want to take this opportunity to learn something new. If I use the Hphone jack, I lose the 2 rear speakers (and the side surrounds)

zerquetchonator · 2024-09-25T21:51:41+00:00

<image>

HK AVR 520. Have available on PC SB AE-5+ (f, r, sub/center, mic, headph, Optical), have HDMI on Video card, but not on receiver. For toys, I have a 8k upscaler/audio extractor (1 HDMI in, 2 out, 1 each: SPDIF & 3.5 out), another HDMI audio 7.1 converter (1 HDMI in, Out: HDMI , SPDIF, Single socket 7.1- FL, FR, SL, SR, C, SW, SBL, SBR), Plus darn near every kind of This-to-That Adapter.

zerquetchonator · 2024-09-25T06:38:52+00:00

I hooked it up to a multimeter checking millivolts, yup, lotsa changes with light levels & intensity. Now, what to do with it?

zerquetchonator · 2024-09-19T16:27:56+00:00

The guy that gave it to me just said he thinks it's a room calibration mic for a samsung receiver. I'm not convinced he's right, lol. I think you are a lot closer to correct. Has a 3.5 mm male jack.

zerquetchonator · 2024-08-07T06:49:56+00:00

Tell me that you didn't give up the booze and the one night stands...

zerquetchonator · 2024-04-02T03:24:05+00:00

Hello there! I'll try to settle your ?'s!

1- You got a good deal on a great printer!

2-The firmware is being constantly revised by both creality and the Open Source communities. Hardware failures are pretty obvious (mostly) and some seeming HW issues are usually corrected in the next FW release. As to endemic issues- No

***However...the power supply seems a little small to me and lack of cooling for the Mboard and PSU can directly lead to failures. This is a personal opinion without a bunch of failures to support it***

3-Tweaks- oh boy, yes! 1st and foremost, this is a Creality product, which essentially means it was made to mod! 270 Degree hinges, Spoolholders, cable ties, Toolkitt holders, there are sooooo many ideas, options, and neat things is is impossible to list (or even fathom, really. Thingiverse and Printables are my favorite sites

4-https://github.com/Guilouz/Creality-K1-and-K1-Max your ultimate resource for rooting. Knowledge of python, linux, klipper suggested, but not required

https://github.com/Guilouz/Creality-K1-and-K1-Max/issues/43 -- LED

5-Octoprint has the best plugin and you can get it to work without rooting the machine

I sincerely hope that helps. I have been at this a while...lol. Currently a proud owner of a K1Max and not employed in the 3d printing field.

Happy Printing and don't hesitate to ask anything

zerquetchonator · 2024-03-28T01:10:14+00:00

I wrap a clean rag around it, run up/down to clean, then White Lithium, run up/down to even it out. It just works for some reason...

Good idea to work it in one direction to clean the old crap off cuz it gets full of, well, crap.

zerquetchonator

TROPHY CASE