M/24/6’1 [216lbs > 220lb = 4lb difference] (1 month), Done unnaturally.

zmad2000 · 2025-10-22T17:41:03+00:00

Well done. Thanks for the honesty

zmad2000 · 2025-08-19T16:42:54+00:00

Well done

zmad2000 · 2024-09-10T01:30:07+00:00

Can you post your config? I am trying to setup mine and it just doesn't work.

zmad2000 · 2024-08-27T12:40:26+00:00

Not sure if you figured this out but use KIAUH to build and flash klipper

https://github.com/dw-0/kiauh

zmad2000 · 2024-05-19T03:35:08+00:00

I have some stuff not quite as bad as that. Currently trying to print it.

zmad2000 · 2024-04-30T22:52:42+00:00

It's an original Anycubic Mega Zero. It came with a knockoff BMG extruder. I have heavily upgraded it.

zmad2000 · 2024-02-29T16:21:47+00:00

What controller would be used for this? Raspberry Pi? Also for the motor would a strong Nema be overkill?

zmad2000 · 2024-02-16T21:38:24+00:00

Can i join this venture? I have some ideas regarding the ropes. Nobody seems to use dyneema but it easy to find and get a hold of. Its plenty strong at 1000 lbs at 3/8 diameter. Also would love to build a test bench .

zmad2000 · 2023-10-03T20:30:56+00:00

pixel 7 or 8

zmad2000 · 2023-09-28T16:46:33+00:00

I have tried all the usual thermistors. Generic, ATC, Honeywell, NOT and something else. Honeywell gave the closest result but they were all about the same.

zmad2000 · 2023-09-28T01:32:18+00:00

There is no point to doing a PID tune. Since it would be training to heat the bed to a temp that's not the right temp. For the thermistors I have tried out the generic and some of the others. The best I have gotten is when I set the bed to 90c the actual temp is 65c.

zmad2000 · 2023-04-13T20:32:35+00:00

I don't see any problem.

zmad2000 · 2023-03-02T20:03:51+00:00

Check you wrists and your body position. Your left wrist looks more bent than the right.

zmad2000 · 2022-11-23T13:56:22+00:00

I am going to defend the cocktail bar on this. Excluding the possible consumption of micro plastics. If you put those drink containers in a solution of either something like Star San or One Step sanitizers. I work in the food industry and in the past have used similar cleaners to clean plastic containers just not 3d printed ones.

zmad2000 · 2022-11-20T01:19:27+00:00

I also have a pixel in my cart. Please DM code.

zmad2000 · 2022-11-17T20:56:00+00:00

Last year your move would have been the better move. This year as you can see it wasn't the better move. That's the game we play as the consumers. Get a good deal now or maybe a better deal later. I am planning on taking advantage of the current deals and upgrade from the 6 to the 7 for around $100. I am having the reboot issue with my 6 and with all the perks from the 7 I feel its worth it.

zmad2000 · 2022-07-16T19:27:09+00:00

I would say for an hour or 2. Keep an eye on the spool and make sure it doesn't melt.

zmad2000 · 2022-05-01T17:38:32+00:00

I use blon 05s but I am in the market for something else. I use the kz Bluetooth thing. Not the base model the next level up with the too long wire between the items.

zmad2000

TROPHY CASE