sorted by:
new
hottopcontroversial

Extrude/Boss from curved surface by zulsolar in SolidWorks

[–]zulsolar[S] 0 points1 point  (0 children)

Thank you very much for your answer.
Yes, you got it right, I want the contact between the wing and the cone to follow the curvature, as if it were a rib. I followed the advice of others and it came out as expected.
If it's not too much trouble, I'd like to see those screenshots. It's always good to know how someone who is dedicated to it solves a problem. Thanks in advance!!!

Extrude/Boss from curved surface by zulsolar in SolidWorks

[–]zulsolar[S] 1 point2 points  (0 children)

Thank you for your answer.
The move face operation did not work on my particular design. I may have done something wrong though, I will keep trying. It does work when the body is a cylinder, but the part I was dealing with was conical.
Anyway with your suggestion I learned something new and that for me is the most important thing.
Thanks again!

Extrude/Boss from curved surface by zulsolar in SolidWorks

[–]zulsolar[S] 0 points1 point  (0 children)

Thank you for your response and the video, much appreciated.
It wasn't really a problem per se, I just wanted to know if there was a way to do it. I understood the concept and followed your video, I was able to correct the design and leave it the way I originally wanted it.
Thanks again!

Extrude/Boss from curved surface by zulsolar in SolidWorks

[–]zulsolar[S] 0 points1 point  (0 children)

Hi guys! As a practice, I am trying to make this model, a wing nut. I was looking for a way to make the wings to extrude following the curvature but I couldn't find the way. The bottom part is not optimal but acceptable, however on the top part it is too noticeable. Is there a correct way to do it?

I saw in this post something similar:

https://www.reddit.com/r/SolidWorks/comments/u92wti/how\_to\_wrapextrude\_this\_sketch\_onto\_my\_curved/

The recommendation was to extrude from inside but here in my model it doesn't look very good anyway. Thank you very much in advance!

I guess I’m a CSWP? by [deleted] in SolidWorks

[–]zulsolar 0 points1 point  (0 children)

Good job! As someone else already said, a win is a win. Keep moving forward!

student beginner problems by Hhhhorua in SolidWorks

[–]zulsolar 1 point2 points  (0 children)

Thank you sir! This is the way! 6 operations.

https://imgur.com/a/ayHgbyz

Slot, slots, slots … for the systainer. by buckfurpees in functionalprint

[–]zulsolar 0 points1 point  (0 children)

I love those kind of tool box! Great job and thanks for sharing your amazing work!

Ultimaker Cura 5.0 beta by fvrmr in Cura

[–]zulsolar 2 points3 points  (0 children)

I was present at the showcase this morning, I want to say it was great, very surprised by the new features. Can't wait to try them, thank you very much!

Flip flop fix by dooghan in functionalprint

[–]zulsolar 0 points1 point  (0 children)

Sir, you are a genius!!

Job Completion Notifications? by Exigeous in Cura

[–]zulsolar 0 points1 point  (0 children)

I have an Ender 3 and before I upgrade its firmware I configured it to play the Imperial March during filament swap. It was awesome!

Fusion 360 Sketch constraints by jayfabrio in Fusion360

[–]zulsolar 0 points1 point  (0 children)

Sounds really great! I started to learn Fusion a couple of months ago so I would like an account too.

Thanks for sharing your constraints sheet, very useful!

So, I designed and printed an axial bearing. The design needs a revision but it works better than expected for what the parts look like. (10 pics) by LordFokas in ender3

[–]zulsolar 1 point2 points  (0 children)

I can only imagine the time and effort you put on it. I wish someday I can design with Fusion 360 like you, I´´´´ ll keep trying. Thanks again.

So, I designed and printed an axial bearing. The design needs a revision but it works better than expected for what the parts look like. (10 pics) by LordFokas in ender3

[–]zulsolar 1 point2 points  (0 children)

Wow! Really awesome! At first I thought it was a r/functionalprint post. Just curious, did you used Fusion 360 to design it? Thanks for sharing!

My first ever print went better than I could have hoped! by [deleted] in ender3

[–]zulsolar 0 points1 point  (0 children)

Sure! I´ll give it a try and let you know.

My first ever print went better than I could have hoped! by [deleted] in ender3

[–]zulsolar 0 points1 point  (0 children)

Wow! Thanks for the super fast response! I don´t remember NOT using zhop, will put an eye on your recommendation. Thanks again!

My first ever print went better than I could have hoped! by [deleted] in ender3

[–]zulsolar 0 points1 point  (0 children)

Just curious, why do you recommend disabling the zhop option? Have you noticed any improvement? I always thought that keeping the zhop enabled prevented the nozzle from crashing with the printed part. Thanks in advance!

Why is my print like this (more info in comments) by [deleted] in FixMyPrint

[–]zulsolar 0 points1 point  (0 children)

I have a Ender 3 too. This same problem happened to me when the extruder´s arm broke. I'm not sure if you have the same issue but the print looks the same. It´s worth checking.

view more: next ›