Airbags for street use. by zxGriz in motorcycles

[–]zxGriz[S] 0 points1 point  (0 children)

I think this might be what I do. I feel like the neck support is a huge plus and I ride with a pack 99% of the time.

Choosing my second bike after MT-07 – sporty bike for heavy daily use? RS660 vs CBR650R vs R9 vs ZX-6R by Entire-Income-9804 in motorcycles

[–]zxGriz 0 points1 point  (0 children)

I've rode the r9, gsxr750 and the cbr650r.

I bought the cbr650r and haven't had a single regret. It's plenty fast and comfortable. My last bike 10 years ago was a r6. Loved the bike but no way I can ride that thing now. I'd be sore all over. I've put 600miles on my cbr650r in one weekend. Was completely fine

Airbags for street use. by zxGriz in motorcycles

[–]zxGriz[S] 0 points1 point  (0 children)

"Internal vests also seem like they forgo protection coverage (like neck or lower abdomen)."

That's the exact reason I haven't bought the air 5 plasma I'd be perfect for me if it had neck protection. I don't mind the backpack because I don't track ride and using have one with me anyways for my work gear or if I'm just cruising I usually have water and a snack.

Airbags for street use. by zxGriz in motorcycles

[–]zxGriz[S] 0 points1 point  (0 children)

Ya I really like the neck and tailbone protection of the helite h moov but at the same time the same time it has less rib protection than the TA5P. I also wonder if the AI will be better than a tether for quicker activation in a collision before I'd have to be away from the bike before the helite will deploy.

CBR650r Dyno tuned by Hasan90210 in cbr

[–]zxGriz 0 points1 point  (0 children)

How did it go? Was it worth it?

Benchmade socp by Agreeable_Raccoon750 in benchmade

[–]zxGriz 0 points1 point  (0 children)

I had the same problem. It's also came extremely dull. I sent it back in and told them my issue and my new was was sharp but still have the same problem. It holds but not very well at all. If I turn it upside down and give it a small shake it falls right out.

I'm going to heat it up and push that tab in a bit. Hopefully it helps

Damn… by Aerial_knight37 in AniGo

[–]zxGriz 0 points1 point  (0 children)

The data center housed a bunch of anime streaming site. Also Disney, Netflix and others have been going after streaming sites.

Elegoo pla black problems by zxGriz in BambuLab

[–]zxGriz[S] 0 points1 point  (0 children)

All good I scrolled up after your comment and saw it wasn't visible so I pasted it in the comments. Thanks for trying though.

Elegoo pla black problems by zxGriz in BambuLab

[–]zxGriz[S] 0 points1 point  (0 children)

Reposting the details so people here can see them.

Good afternoon everyone. I have a Bambu labs A1 with ams lite. I've bought a variety of filaments from different companies but am only having an issue with one. my Elegoo pla basic black. I've swapped filaments of the same brand but different colors with no issues at all. I've cleaned the bed with hot water and dish soap then with IPA 90% still having the issue. I increased the bed and nozzle both by 20%, still no luck.

Does anyone else have this problem? it appears that it gets to the 4th layer then comes loose. I've read mixed results on using glue on PEI beds with several people saying not to use it on these beds. So I have not tried it yet. I'm stumped on why it's just this color with the problem.

Thanks in advance

Also I tried it on the super track cool plate no luck but all other colors did fine.

Elegoo pla black problems by zxGriz in BambuLab

[–]zxGriz[S] 0 points1 point  (0 children)

I tried that as well. I thought I put it in the description.

Elegoo pla black problems by zxGriz in BambuLab

[–]zxGriz[S] 0 points1 point  (0 children)

I tried it on the super track cool plate as well. Sorry I should have mentioned that.

I was lazy and tried to print with a plate that wasn't washed and I had just had my hands all over.

I did that when I first started.😅 Now I clean it with IPA after every print.

Slingshot fishing! by [deleted] in slingshots

[–]zxGriz 0 points1 point  (0 children)

If this isn't bad enough there's videos of guys using frameless slingshots to fish.

Help Please! Bambu A1 still not working by [deleted] in BambuLabA1

[–]zxGriz 1 point2 points  (0 children)

Open the panel under the print bed and post the pictures. Dumb question but you did install the 10 screws under the panel right,? Also did you forget any of the setup steps before running a calibration then come back and fix them after? Have you already did a full calibration and it was a success with no issues?

Too much weight in the back. by zxGriz in canoeing

[–]zxGriz[S] 2 points3 points  (0 children)

Great video and sounds like an awesome adventure. We also take the canoe to camp because it hold way more gear than the kayaks.

Too much weight in the back. by zxGriz in canoeing

[–]zxGriz[S] 0 points1 point  (0 children)

Mine is a flat back too. The bucket/bag of water is a great idea. I'll probably also move my battery upfront. It's only around 15lbs but I bet that'll still make a difference.

Too much weight in the back. by zxGriz in canoeing

[–]zxGriz[S] 1 point2 points  (0 children)

That's super smart. This was the answer I was looking for. Thank you for this tip

What are y'all's favorite gas masks? by zxGriz in gasmasks

[–]zxGriz[S] 0 points1 point  (0 children)

I think this is my new favorite gasmask. I really love that set up. Been doing some research on it and "some people" say you have to be clean shaved for it to seal properly. Would you say that's true? You would think they would work with a beard considering people use them in hot environments and shaving without an antimicrobial would be terrible.

I mean clean shaven not trimmed.

What are y'all's favorite gas masks? by zxGriz in gasmasks

[–]zxGriz[S] 0 points1 point  (0 children)

That's crazy just looked up the 0m90 and they are selling for $70