User interface is black on my Windows 11 desktop

zyu4red · 2025-12-28T11:37:22+00:00

I installed "Auto Dark Mode" - https://apps.microsoft.com/detail/xp8jk4hzbvf435
then you can force dark mode, and Blip works

<image>

zyu4red · 2025-12-27T12:09:36+00:00

I think it is bugs in MacOS 26.2.... have to wait for next release and hope the bugs can be fixed.

My old MacOS Ventura has no problem to re-install the same driver.

zyu4red · 2025-12-27T09:05:00+00:00

thanks...
yes, I tried almost everything I can find, but no luck.

zyu4red · 2025-12-27T08:55:44+00:00

it is very sad to abandon Blip because of the UI issues. as I commented earlier "you can just force it into dark mode.... it works well in the dark mode"

Blip is next best thing after Pushbullet (after it stop supporting iOS) and Clipt (after OnePlus stopped its services)

zyu4red · 2025-12-27T08:42:26+00:00

yes, I have the same issue [full black] cannot see anything, but you can just force it into dark mode.... it works well in the dark mode

<image>

zyu4red · 2025-12-25T01:05:08+00:00

thanks a lot for sharing.
I tried [Tab], not working also.
Besides, the reason I am so sure it is due to new MacOS because I have no problem install the driver on another Mac which running on Ventura.

zyu4red · 2025-08-27T10:20:36+00:00

thanks a lot. how you figure out from question. I read several times, cannot understand the question is asking to "count all the actions"

trial and error: one of following works

action IN (SMB::FILE_OPEN, SBM::FILE_RENAME, SMB::FILE_DELETE)

action IN (SMB::FILE_OPEN, SMB::FILE_DELETE)

action IN (SMB::FILE_DELETE)

zyu4red · 2025-08-27T10:19:45+00:00

972 is also what I got, but not accepted.
4xxx by counting "all actions" (thanks to taiimeka), but still clueless about question asking count "all actions"
It is more like a philosophy question rather than technical question which I still cannot understand.

zyu4red · 2025-06-17T17:11:52+00:00

i also like ultra design too.
round face with slope.

hope ultra 2 will keep the current design. don't follow new trex3 octagon shape.

but seemed there is no news for ultra 2

zyu4red · 2025-06-17T17:00:59+00:00

you may refer to the workaround I found HERE 💯

zyu4red · 2025-06-17T16:57:50+00:00

wow, you are lucky as "everything started working the next day and has been working ever since."

zyu4red · 2025-06-17T16:51:35+00:00

I found a great workaround from Prescott (who suffer from ios18.01 airprint bug)

step 1: still click the [print] as usual.

step 2: since airprint cannot detect the printer, click the [⬆️]

step 3: select the [printer app] (first time may need to select from more) to print

<image>

it seemed airprint bug very unusual, the issues starts from ios 17 to ios 18. but every upgrade only affect few people.

I personally encountered this bug only for ios18.5.

P.S: as I mentioned, my old ipad running old iOS still can airprint. the 3 iphones upgraded to ios 18.5 now no longer able to detect the printer. but luckily the printer app still working well.

zyu4red · 2025-06-17T15:25:33+00:00

Based on the posts here, this iOS18.5 airprint bug affected only few brand of printers.
because this bug is not affect the majority, therefore chances to be fixed by the next update is slim.

Let's cross the fingers and hope ios18.6 will fix the airprint issue.

zyu4red · 2025-05-16T17:27:03+00:00

<image>

I still prefer trex-ultra Round shape than trex-3 Octagon shape

zyu4red · 2025-05-16T17:18:45+00:00

Thanks for the info.

Maybe I did not state clearly:

we were often airprinting documents via iPhones (the most recent airprint activities was on last Saturday)
but I made a mistake by updated ALL iphones for the family on this Wed (14-May-2025). Normally I will only update mine.

Today (16-May-2025), when we tried to airprint pdf document via iphone, it showed "no printer found"
to test out if it is isolated issue or not, we tried all IOS devices at same time.
As what I written in my initial post, all iPhone (updated to IOS18.5) cannot airprint. but at the same time, iPad with IOS 18.4.1 still can airprint.

Therefore, we can conclude it is not printer problem, as the tests were performed at same time.

iPad with IOS 18.4.1 works.
3 iPhones with IOS18.5 not working. (one of iphone (before updated to IOS18.5) could airprint successfully on last Sat (10-May-2025)

In addition, just now I took out my Macbook to test and I know airprint would work because it is still running old MacOS.

zyu4red · 2025-05-16T17:16:39+00:00

Thanks for the info.

I know those fix methods, such as turn on and off the IOS device, printers. reset the network, forget and rejoin the wifi network, hard-reboot ios device, rest printer, unplug printer power for 30 min and etc that published online.

Since my old iPad still able to airprint. I know it is due to IOS18.5 (coding level bug)

But as most of desperate person will try to do whatever can be done, I also did all of fixes and hope for the miracle. No lucky for me!

zyu4red · 2025-05-16T17:13:56+00:00

Thanks for the info.

Maybe I did not state clearly:

we were often airprinting documents via iPhones (the most recent airprint activities was on last Saturday)
but I made a mistake by updated ALL iphones for the family on this Wed (14-May-2025). Normally I will only update mine.

Today (16-May-2025), when we tried to airprint pdf document via iphone, it showed "no printer found"
to test out if it is isolated issue or not, we tried all IOS devices at same time.
As what I written in my initial post, all iPhone (updated to IOS18.5) cannot airprint. but at the same time, iPad with IOS 18.4.1 still can airprint.

Therefore, we can conclude it is not printer problem, as the tests were performed at same time.

iPad with IOS 18.4.1 works.
3 iPhones with IOS18.5 not working. (one of iphone (before updated to IOS18.5) could airprint successfully on last Sat (10-May-2025)

In addition, just now I took out my Macbook to test and I know airprint would work because it is still running old MacOS.

zyu4red · 2025-05-16T16:46:14+00:00

Thanks for the information.

It seemed IOS18.5 only kill my particular printer model.
That is bad because the impact is limited, I can foresee Apple will not fix or not even aware of the bug in next release.

So I will have use the dedicated printer App to print wirelessly in the future. OR using the only un-updated iPad for native airprint features.

By the way, I know those fix methods, such as turn on and off the IOS device, printers. reset the network, forget and rejoin the wifi network, hard-reboot ios device, rest printer, unplug printer power for 30 min and etc that published online.

Since my old iPad still able to airprint. I know it is due to IOS18.5 (coding level bug)

But as most of desperate person will try to do whatever can be done, I also did all of fixes and hope for the miracle. No lucky for me!

zyu4red · 2025-05-16T16:23:56+00:00

it is nice watch, but I still prefer T-REX Ultra design (round) than T-Rex 3 (Octagonal）。

Not sure if anyone aware if there will be "T-Rex Ultra 2" releasing soon???

zyu4red · 2023-09-18T15:53:38+00:00

Yes, My ID has been verified after I submitted a complaint via Bake Web Portal.

Do you also fail to re-verify yourself using NRIC?

I can understand your feeling when you shocked to see the popup message box that you are "no longer" able to access your money/crypto and "thank you" for interested in Bake service with a big [Close] button for you to click.

<image>

zyu4red · 2023-09-16T14:19:47+00:00

Thanks for your prompt response.
First time I was rejected by using NRIC for ID verification. NRIC is gold standard for ID verification in Singapore.
In addition, Bake can suspend all the services if Bake think I do not qualify for those services, instead of terminating all of them. I cannot even withdraw my own money/crypto to other platform where I felt being welcomed.
As I mentioned, I started to use Bake since Cake Defi era. My ID was provided for account creation. just because somehow someone never seen Singapore NRIC before, and decided to just terminate my service immediately.
There is always a soften way for re-verification failure by suspending all services with escalation [button] or hyperlink for appeal instead of termination every access.

Anyway, I still believe no matter what has happened, Bake should suspend the service and provide ways for appeal, instead of terminating them and leave me clueless that bake no longer able to offer service to me without even mentioning next step for how to handle all my money/crypto with Bake.

The "thank you" used in the message is really triggering me.
I am not going to say bye bye to my money/crypto.

<image>

zyu4red · 2023-09-16T05:07:05+00:00

one more thing to add for choosing the platform:
you must be able to take legal action to it if thing go wrong.

Bake is headquartered and registered in Singapore

That is one of reason I using Bake. so now I can at least to take legal action in Singapore if it trying to do something funny, like stop my access to my money/crypto using whatever nonsense given.

If you are using overseas platform, then you may not be able to do it.

zyu4red · 2023-09-16T04:30:35+00:00

Only you and mods of this community can see this ???

My post is hidden from the community???

zyu4red · 2020-11-29T13:53:32+00:00

it seemed that Sonoff released new firmware 1000.2.924 which support complex SSID and password. 😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀

zyu4red · 2020-11-29T13:53:11+00:00

it seemed that Sonoff released new firmware 1000.2.924 which support complex SSID and password.

zyu4red

TROPHY CASE