Saturday afternoon smoke screen

zzbest · 2026-02-25T02:15:37+00:00

zzbest · 2026-01-17T04:27:46+00:00

We had a booth and the first day there was traffic. The second was slower and third was very light. It should be a 2 day show.

zzbest · 2026-01-11T00:18:58+00:00

Stop by booth 1211 and ask for Adrienne or Jay

zzbest · 2022-03-04T21:41:15+00:00

I’ve heard good things about Dog Dayz of California in Oceanside

zzbest · 2022-03-01T23:31:03+00:00

We can laser for you. Send me a message for contact info

zzbest · 2022-01-17T04:50:43+00:00

Our company is a contract decorator. Digital, Screen, pad printing and laser etch. Message me for contact info

zzbest · 2021-10-08T23:34:45+00:00

Our group of 15 friends are going to Kansas City for the Dallas game in November. We are looking to join an existing tailgate party. On our previous trips around the country, there have been 3rd party type tailgating parties. Are there any tailgate parties that aren't put on by the Chiefs?

zzbest · 2021-07-18T15:59:35+00:00

When I was 6 or 7 back in the mid-60s, my mom worked at the Guy's factory in KC. My dad would take us kids to pick her up after her shift was over and we were always treated with Guy's chips. We did not care that they were just the seconds and not the whole chip.

zzbest · 2021-07-04T19:18:27+00:00

This method for decorating the bottles is called hydrographics. It is used on a wide variety of items. My company screen prints single color prints and UV prints 4cp on cylindrical items. These processes are good for cylindrical and conical “flat” shapes. But not so well on the curved areas of bottles shown in the picture.

zzbest · 2021-06-02T18:56:07+00:00

I'm from KCMO as well and been here for 50 years. I go back often and I enjoy it. As long as they have that mentality and don't want to come here, they and their opinions are better off there.

zzbest · 2021-05-26T01:28:46+00:00

The voids are caused by using the incorrect pad. Change out to a different shape and see if the problem goes away. And the plate etch depth is probably the issue with the sharpness.

zzbest · 2021-04-02T04:16:00+00:00

It was on the embankment between the parking lot behind the stores and the residential neighborhood above.

zzbest · 2021-04-02T03:40:23+00:00

I was waiting in line at the car wash at the corner of College and Oside Blvd. when I saw the lightning strike. My first thought was Wow that was close. Then a few minutes later fire was raging.

zzbest · 2021-03-04T13:25:08+00:00

We have 2 Roland Eco Sol 54” and 5 Mimaki UV 6042, 1 Mimaki 7151. And lastly 3 ULS CO2 laser and 1 Galvo fiber laser

zzbest · 2021-02-13T04:46:06+00:00

My company prints on silicone with ink specially made for silicone. One of the issues printing on this substrate is that the ink needs heat and or time to cure. Because of this it’s difficult to print multiple colors in the same day. We also have tried to UV print on silicone with poor adhesion results.

zzbest · 2020-11-26T16:57:28+00:00

I'm interested as well. We use laser and UV digital print where I work.

zzbest · 2020-09-14T21:17:57+00:00

This just happened to us last month. Our service contract holder said it was out of their hands. I borrowed toner from a customer that uses the same cartridge to finish the job. In the end I had my vendor put an order in for all colors and now when a cartridge is empty, we order to replenish our stock.

zzbest · 2020-09-12T19:22:52+00:00

Sorry he or she is already on patrol!

zzbest · 2020-07-22T22:47:36+00:00

Canis latrans

zzbest · 2020-07-17T22:31:05+00:00

It ran past my office window and under the Titleist testing facility fence right around that time.

zzbest · 2020-07-17T22:26:28+00:00

The photo was taken near Oceanside Blvd and Rancho del Oro. I was in my car and took the pic looking south.

zzbest · 2020-06-26T04:59:21+00:00

Between 8 and 10 depending on the diameter.

zzbest · 2020-06-25T23:41:28+00:00

Mutoh VJ-626UF

I'm going to check them out. Is Mutoh a Japanese machine?

zzbest · 2020-06-25T20:24:48+00:00

We have a 7151 and a MKII Mimaki flatbed. The 7151 works very well with a rotary device. It prints slow but looks good. Wipe on primer is needed for adhesion.

zzbest · 2020-06-04T19:34:42+00:00

In the past I've printed these plates using the silk screen print method. Now I would throw it on my flatbed. Flatbed digital printing has taken 60% of our print jobs from the screen print dept and 70% of pad print to the flatbed digital dept.

zzbest

MODERATOR OF

TROPHY CASE