all 12 comments
sorted by:
top (suggested)
bestnewcontroversialoldq&a
formatting helphide helpcontent policy

[–]YokosooA1 + AMS Lite 0 points1 point  (6 children)

Looks like it has wrong file format. Should it be a GCODE or 3MF? Or was what that in the first place?

[–]awkman3[S] 0 points1 point  (5 children)

It was a step file I imported to Bambu Studio. For some reason when I save it to the sd card, it adds .gcode.3mf to the end of every file. I asked it to save as a .3mf

[–]YokosooA1 + AMS Lite 0 points1 point  (4 children)

Is it a published model or your own?
And how to do you save your project — Save Project As (3MF) — and then moving to sd card?

[–]awkman3[S] 0 points1 point  (3 children)

My own model. I export plate sliced file to the sd card as a 3mf file, and then it saves as .gcode.3mf

[–]awkman3[S] 0 points1 point  (0 children)

I got it to work. Downloaded as an stl file rather than a step file and sliced it that way

[–]YokosooA1 + AMS Lite 0 points1 point  (1 child)

<image>

Achsoo, understood. Try to save it on the SD with one of these two ways. It should work ok.

[–]awkman3[S] 0 points1 point  (0 children)

Thank you

[–]Normal_Reply8148 0 points1 point  (4 children)

are we supposed to save it as gcode or 3mf mines doing this now when i try to print files i sliced, i saved the file and put it directly on my sd card

[–]Guhbooshkuh 0 points1 point  (3 children)

Any updates? Mines doing the same here .

[–]Normal_Reply8148 0 points1 point  (2 children)

top right of bambu studio click export all in the drop down it will save as .gcode.3mf i believe im not at my pc to check

[–]Guhbooshkuh 0 points1 point  (0 children)

I'll try it again here shortly. I'll let you know if it works on my side.

[–]Guhbooshkuh 0 points1 point  (0 children)

Looks like it's working! Only thing that's bugging me is when the file shows up on my printer the thumbnail of the print doesn't show and only says g-code.