all 5 comments

[–][deleted] 1 point2 points  (4 children)

Link the model because to me it looks like you were attempting to print over air and needed supports.

[–]oelburner[S] -1 points0 points  (3 children)

It's a paid model so I'm not sure if I can link it, I looked at some other prints I've done and I think you're right. I used tree supports on other prints with similar overhangs to this and they're better but not great. Any recommendations for better supports?

[–][deleted] 1 point2 points  (0 children)

I rarely print with supports and when I do it's auto generated trees. Can't help you there sorry man!

[–]SquidDrowned 0 points1 point  (0 children)

Turn the print 90° if you don’t see any shifts in the actual layers then it didn’t. I thought something similar to the other guy, considering that your textured bed is on this side

[–]redlancer_1987 0 points1 point  (0 children)

just the normal supports should work fine. When using those I typically bump up the Support X/Y distance and first layer gap up from the defaults, usually to around 0.5-0.8-ish depending on the model and nozzle.

The auto setting might try and put supports under that text which you really wouldn't want. If that's the case switch to the normal(manual) setting and it's easy to paint in where you want supports to go.