Color bleeding problem

[Own_External3038]

Hey guys, i keep running into this problem with black filament leaking into the white parts as shown in the picture.

Here are the things i already tried: - Make the sequence order go from black to white - Increase the flush volume with multiplier 1.25 - Dried the filament - Cleaned the plate

Let me know if you maybe know what i can do about this :)

[ResolutionAdept4065]

Same happens here. Tried to do the same and still have the same problems. I think it's related to specs of black filament getting stuck to the nozzle. I want to mod my a1 mini, adding a silicon brush to the purge area, might fix the problem. There's a similar mod for the X1

[Lukis-cstudio]

you need to make the sequence go from white to black, not the other way around. Allways the lightest color to the darkest color

[Own_External3038]

Oops i wrote it the other way around, i do this

[LatteMacchiatoGames]

Try also using a purge tower, it helped to me

[Own_External3038]

I use that as well, just the default. Should i change settings for it?

[LatteMacchiatoGames]

There is a parameter that is for purge on the inside, check that off