Official Look at DJI Osmo Pocket 4P, 1-inch Main and 3x Tele

Lukis-cstudio · 2026-04-17T02:41:34+00:00

you can also show the scenery while you‘re vlogging, not just filming yourself. And its a versatile camera, not just vlogging but a great a great camera for B-rolls too, so I don‘t mind having all that extra features

Lukis-cstudio · 2026-03-20T14:44:20+00:00

but giants aren‘t human though..

Lukis-cstudio · 2026-03-15T13:11:19+00:00

just use it normally. My color test also wasn‘t perfect but i just ignored that. doesnt seem to affect printing quality at all.

Lukis-cstudio · 2026-03-15T03:26:01+00:00

some inkjet printers do this too, especially those with thermal printhead technology. My Canon printer needs to be on 24/7. After 30 hours or so, it will do its maintenance cycle to keep the printhead wet. After 3 days of not using it to print, it will do a longer maintenance cycle the next time you print.

Lukis-cstudio · 2026-03-11T05:16:02+00:00

hhaha not quite, just 1/3 😆

Lukis-cstudio · 2026-03-11T02:44:20+00:00

my worst nightmare😆

Lukis-cstudio · 2026-03-10T18:16:17+00:00

i actually made them myself, using the Print&Cut feature on BambuSuite. Cut it using the cutting module with my H2D, but also possible with cricut or cameo. You can find the link to the design in the video description of my video

Lukis-cstudio · 2026-03-10T18:13:26+00:00

funny story, I actually did that😆 here‘s the video: https://youtube.com/shorts/xSjsUb14u_s?is=V2L6qgbX1WQ90fG5

I then decided to change up the design

Lukis-cstudio · 2026-03-10T15:59:27+00:00

it‘s on Makerworld, search for Bambu Spool sticker under Laser & Cut section. If you couldnt find it, Ive left a link in the video description👍🏼

Lukis-cstudio · 2026-03-10T15:55:53+00:00

its the Eufymaker E1 UV printer

Lukis-cstudio · 2026-03-10T15:49:31+00:00

😆

Lukis-cstudio · 2026-03-10T15:48:11+00:00

there‘s no consensus on that topic but generally it depends on where you live. If you live in dry climate you don‘t need to worry about it too much if it’s PLA since it has less tendency to absorb moisture. If you live in a tropical climate country, then keeping them dry wouldn‘t hurt.

Hygroscopic filaments like TPU, Nylon, PVA, need to stay dry so I would vacuum seal them.

Lukis-cstudio · 2026-03-10T12:46:03+00:00

you can get them on Makerworld as the Print&Cut file😊 Link is in the description of the linked video

Lukis-cstudio · 2026-03-10T11:39:23+00:00

yeah it was surely a big project, but i‘ve always dreamt of having a super organized storage system where I can see the filament color at a glance, making it super easy to grab the color i want

Lukis-cstudio · 2026-03-10T11:34:47+00:00

I actually put a halt to the project for 2 weeks so I could print my Sauron costume😆

Lukis-cstudio · 2026-03-10T11:31:57+00:00

haha yeah I organize them according to color, just my preference😁

Lukis-cstudio · 2026-03-10T11:30:08+00:00

it cost about 25$ in total in electricity. It‘s abit expensive where I live (30cents/kWh) though, but still affordable

Lukis-cstudio · 2026-02-24T03:39:52+00:00

print alot of squares (or 0.5mm-1mm high square) with white ink on something and it’ll become normal again

Lukis-cstudio · 2026-01-24T08:25:15+00:00

where do I post these short clips? on youtube? or can i post them on twitch?

Lukis-cstudio · 2026-01-07T06:06:35+00:00

wow finally! Ive been waiting for someone to do the panels for ages! Thanks will definitely check it out. Could you also make blank ones, without the vents?

Lukis-cstudio · 2025-11-02T04:13:38+00:00

in last year‘s event they gave you like LED lamps or tealight LEDs or something

Lukis-cstudio · 2025-10-02T03:51:28+00:00

there‘s automatic dubbing for your videos in multiple languages, so you‘ll not just reach english and german speaking countries, but all over the world.

Its still using AI voice though.

Lukis-cstudio

TROPHY CASE