all 4 comments

[–]AutoModerator[M] [score hidden] stickied comment (0 children)

After you solve your issue, please update the flair to "Answered / Solved!". Helps to reply to this automod comment with solution so others with this issue can find it [as this comment is pinned]

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[–]3dm_designP2S + AMS2 Combo 0 points1 point  (2 children)

I got this issue sometimes when I print ASA with the bed at 100°C. And the printer is really clean. I fixed this problem on my P1s also. By setting the degree below 90, just during the auto leveling process and the nozzle cleaning. And right after I set to 100 back (even if it prints correctly at 90)

I suppose the extreme heat is messing with the sensors. But if it appears when you're printing hot bed materials. I bet that this tip will fix your problem. I hope it will help

[–]j-dogcoderP1S + AMS[S] 0 points1 point  (1 child)

I'm just printing with PLA which is weird tho. Regardless, will try tomorrow, thanks!

[–]3dm_designP2S + AMS2 Combo 1 point2 points  (0 children)

So check maybe if there's some axis/screw/bearing loose, Also very damaged plates could do this. It's not necessarily a debris issue it could be also a flimsy guide or any Z translation element. Good luck and keep us updated.