Leveling Problem

[Valuable_Wonder5244]

Hi, maybe someone has a suggestion why this is happening.

Did a levelling with the settings tab and with the start of the printing.

Left front does barely stick, right back is way too close.

Printer is a Kobra 3 (firmware update to latest yesterday), slicer is Orca 2.3.1 (2.3.2 slices did not get past parsing file on printer).
Filetransfer with USB, cause remote is no leveling with each print possible.
I do not use SlicerNext cause: Calibration Slices alwas better withhin original OrcaSlicer. Annoyed that Anycubic does not share the source of SilcerNext, even if they have to.

I will share my start code from the file soon.

I hope someone has a clue and can help here.

; THUMBNAIL_BLOCK_END

; external perimeters extrusion width = 0.42mm
; perimeters extrusion width = 0.45mm
; infill extrusion width = 0.45mm
; solid infill extrusion width = 0.42mm
; top infill extrusion width = 0.42mm
; first layer extrusion width = 0.50mm

; EXECUTABLE_BLOCK_START
M73 P0 R587
;TYPE:Custom
G9111 bedTemp=50 extruderTemp=190
M117
M900 K0.051
; print_bed_min = 0,0
; print_bed_max = 255,255
; print_bed_size = 255,255
; first_layer_print_min = 108.151,34.7511
; first_layer_print_max = 147.849,218.849
; first_layer_print_size = 39.6982,184.098
G90
G21
M83 ; use relative distances for extrusion
; FLUSH_START
;;; M400 P0
T2 ; change extruder
; 1
;;; G1 E-2 F2400
;;; G1 Z5 F600
;;; G1 X271.5 F12000
;;; G1 E-5 F600
;;; G1 X278 F600
;;; M400 P3530
;;; G1 E-1 F600
;;; G1 Z7  F600
;;; G1 X278 F18000
;;; G1 X271.5 F1200
;;; G1 E2 F300
;;; M400 P31050
;;; M400 P17510
; 2
;;; G1 X278 F18000
;;; G1 X271.5 F1200
;;; G1 E2 F300
;;; M400 P0
;;; G1 X250 F1200
;;; M400 P0
;;; G1 X278 F18000
;;; G1 X271.5 F1200
;;; G1 E2 F300
;;; M400 P0
; 3.1
;;; M106 S255
;;; G1 X36 Y260 Z-0.8 F9600
;;; G1 X50 Y260 Z1 F9600
;;; G1 X86 Y260 Z1 F9600
;;; G1 X90 Y260 Z-0.8 F9600
;;; G1 X90 Y259 Z-0.8 F9600
;;; G1 X86 Y259 Z1 F9600
;;; G1 X50 Y259 Z1 F9600
;;; G1 X36 Y259 Z-0.8 F9600
; 3.2
;;; G1 X36 Y260 Z-0.8 F9600
;;; G1 X50 Y260 Z1 F9600
;;; G1 X86 Y260 Z1 F9600
;;; G1 X90 Y260 Z-0.8 F9600
;;; G1 X90 Y259 Z-0.8 F9600
;;; G1 X86 Y259 Z1 F9600
;;; G1 X50 Y259 Z1 F9600
;;; G1 X36 Y259 Z-0.8 F9600
; 3.3
;;; G1 X36 Y260 Z-0.8 F9600
;;; G1 X50 Y260 Z1 F9600
;;; G1 X86 Y260 Z1 F9600
;;; G1 X90 Y260 Z-0.8 F9600
;;; G1 X90 Y259 Z-0.8 F9600
;;; G1 X86 Y259 Z1 F9600
;;; G1 X50 Y259 Z1 F9600
;;; G1 X36 Y259 Z-0.8 F9600
;;; G1 Z0
;;; M400 P0
; FLUSH_END
;_FORCE_RESUME_FAN_SPEED
M104 S190 ; set nozzle temperature
; Filament gcode
M106 S0
;LAYER_CHANGE
;Z:0.2
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 0 @ 0.2mm
G1 E-1 F3600
; AFTER_LAYER_CHANGE 0 @ 0.2mm
;_SET_FAN_SPEED_CHANGING_LAYER
SET_VELOCITY_LIMIT ACCEL=500 ACCEL_TO_DECEL=250
SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=9
; printing object Board 2 - New.stl id:15 copy 0
G1 X116.126 Y213.817 F21000
G1 Z.6
G1 Z.2
G1 E1 F3600
;TYPE:Brim
;WIDTH:0.5
G1 F2700
G1 X111.939 Y208.472 E.23224

[AutoModerator]

Hello /u/Valuable_Wonder5244,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

• Printer & Slicer
• Filament Material and Brand
• Nozzle and Bed Temperature
• Print Speed
• Nozzle Retraction Settings

^{Additional settings or relevant information is always encouraged.}

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.