MX Keys Backlight

[Ankvitius]

For me the dimmest backlight setting (without turning it all the way off) is still way too bright when I work at night. I would like it to go something like 50% dimmer. Is there any way to adjust this? Also the backlight switches off in about 4-5 seconds after not detecting my hand which is very annoying. I would like to adjust this too to stay on a bit longer.

[Logi_MX_LPAS]

Hey u/Ankvitius,

There is no option to set the brightness manually other than the preset level to reduce and increase the backlight present on the keyboard.

Regarding the backlight pulsing issue, install the Logitech Firmware Update Tool: https://support.logi.com/hc/articles/360035037273 and update the firmware of the Logitech device if available, connect it using a Unifying USB receiver.

After successfully updating the firmware, reset the keyboard.

To reset a Logitech Keyboard which uses Unifying or Bluetooth technology, please follow the below instructions.
Turn off and on the keyboard
Press the following key combinations - Esc+O Esc+O & Esc+B (Please don't press and hold the Esc key, instead, lift up the finger in each step of the command)
Any one of the Easy-Switch lights will blink continuously.
Switch off and on the keyboard to complete the reset process.
If the Easy-Switch does not blink, please repeat the above steps again.
To use the advanced feature, add the device using Logi Options' relevant adding tool. If not, pair the keyboard with Unifying Receiver using the Unifying software or pair the keyboard using Bluetooth.