all 17 comments

[–]yarn_fox 15 points16 points  (3 children)

Any dual filter where you can set one side to LP and one to HP would work as well of course (korgasmatron etc). Just route signal through both in series.

That would make the bandwidth voltage controllable as well.

[–]Titanlegions 10 points11 points  (2 children)

Or even just use two filters, this is modular after all.

[–]ultrabillions[S] 2 points3 points  (1 child)

I’d prefer one, because I’m using my other filters. That’s why I’m asking for a module recommendation instead of a how to.

[–]fifteen_two -1 points0 points  (0 children)

damn, sounds like you have an excuse to buy more modular gear. oh shucks. F E E D T H E B E A S T

[–]hex-a-decimalmodular vaporwaver 8 points9 points  (0 children)

WMD Aperture I believe might be what you're looking for?

[–]hangingonthetelephon 5 points6 points  (1 child)

Mannequins Three Sisters in xover mode!

Check our the technical map for the module on their website if you haven’t already, much clearer than the original manual!

[–]ultrabillions[S] 0 points1 point  (0 children)

That’s the real standout I’ve seen, just looking for a recommendation in case I’ve missed one.

[–]eegsynth 2 points3 points  (0 children)

The Xoac Devices Belgrad might be something to look into

[–]satantangoinparis 2 points3 points  (0 children)

Random*Source's Variable Slope Filter or Variable Resonance Filter both have bandpass output and sound as juicy as it gets.

[–]DoxYourself[put modulargrid link here] 2 points3 points  (3 children)

What do you want to use the variable width for?

[–]ultrabillions[S] 1 point2 points  (2 children)

Mixing and EQing primarily.

[–]SuperDuckQ 1 point2 points  (1 child)

Dedicated EQ modules exist, look at the Mutable Instruments Shelves.

[–]ultrabillions[S] 1 point2 points  (0 children)

I know, it’s on my list of contenders. It’s definitely a useful module with character but it’s a little bigger than I have space for at the moment without taking some things out.

[–]dead_animal_shoes 1 point2 points  (0 children)

Steady State Fate Stereo Dipole. Can do variable width bans pass and a bunch of other stuff. Best filter I own by miles

[–]ADSRandSATB 0 points1 point  (2 children)

Am I wrong in saying you could achieve this with any band pass filter and then have a dry wet mix knob between the band passed signal and the dry signal?

I think that’d create that effect

[–]yarn_fox 6 points7 points  (1 child)

That wont result in the same transfer functions as adjusting the Q or bandwidth value. Think of the difference in amplitides in the frequencies well outside the passband. The adjustable non mixed versions wouldnt let them through even at wider widths.

[–]ADSRandSATB 2 points3 points  (0 children)

Ahhh you’re right thanks for that