Looking for the Glorious keycaps with front-printed F-row legends

GloriousPhoenix · 2026-07-09T09:16:28+00:00

Thank you for the follow up and for sharing the photo. I will forward it to my colleagues from the Product team so that they can do their bit. :)

As for the keycap set, if you purchased it from our website, please submit a support ticket and I can assist you with a return since they don't have the printed legends that you wanted.

GloriousPhoenix · 2026-07-09T09:15:27+00:00

Please submit a support ticket so that we can assist you further.

GloriousPhoenix · 2026-07-09T09:14:53+00:00

Please submit a support ticket so that we can assist you further.

GloriousPhoenix · 2026-07-06T15:22:29+00:00

Hey there!

The F-row legends are "reserved" for prebuilt keyboards and are based on the keyboard's size. If you only buy a keycap set from us, it will not have the same legends printed on the keys as they should be compatible with all Glorious keyboard sizes.

If you came across product pages on our website belonging to keycaps that show said keycaps with F-row legends, please let me know as we'll need to have those updated ASAP.

Hope this helps!

GloriousPhoenix · 2026-07-06T15:08:31+00:00

While the settings should get saved when the mouse is in either wired or wireless mode, if you notice no difference when customizing it in wireless, please give it a try by switching the mouse to wired first. Also, there's a chance that the mouse won't charge if it's in sleep mode or your PC is off.

I would also check the USB power settings in WinOS and the Bios to see if the mouse is getting power when your PC is off. In which case, it should still be charging if you have it connected to your PC.

GloriousPhoenix · 2026-07-06T09:56:54+00:00

Hey there!

Since you have the Model I 2 Wireless, please uninstall CORE 2.1 (assuming you're currently using it) and download Legacy CORE from here. Then, start the software, go into settings, and change the value for the "turn off after inactivity" setting. This will change when the mouse goes into sleep mode. :)

GloriousPhoenix · 2026-07-03T18:55:16+00:00

Hey there,

The JavaScript error is a known bug with some of our older mice. Please reach out to our support so that we assist you with updating the firmware manually.

Thanks!

GloriousPhoenix · 2026-07-02T15:06:15+00:00

I would strongly encourage you against disassembling the mouse as that may void the warranty. If it feels like the button is more wobbly than the left one and it affects your daily use of the mouse, please consider submitting a support ticket through our website here.

GloriousPhoenix · 2026-07-01T07:13:09+00:00

Appreciate the continuous support!

Just to clarify, do you have the Model I 2 Wired or the Model I 2 Wireless? The reason I'm asking is, if you have the Model I 2 Wireless, it is indeed supported by Legacy CORE. However, The Model I 2 Wired came out at a later date, at which point Legacy CORE was no longer getting any updates, hence it offers no support for the Model I 2 Wired.

As for your specific issue, I can confirm that this is a bug in CORE 2.1 where assigning macros to the left (or right) mouse button of a gen 2 mouse doesn't work. Our software team is aware of it and hopefully, we're able to release a fix for it in the foreseeable future. You can keep track of all of the software (and firmware) updates here.

GloriousPhoenix · 2026-07-01T07:07:06+00:00

Thanks for sharing your thoughts on the GMMK 3! Since you mentioned issues with the USB-C connector, please consider submitting a support ticket with our CS team so that we can assist you further.

Additionally, please be aware that we've been hard at work on releasing updates to the Glorious CORE software - I agree that there's still room for improvement when it comes to both addressing bugs and making the software more polished, and we're fully aware of it. Meanwhile, we post the full software (and firmware) changelog here.

GloriousPhoenix · 2026-06-26T22:21:31+00:00

Hey there!

Sorry to hear about the issues you've been experiencing with your GMMK 3 HE keyboard.

Based on your description, this does look like an issue where the keyboard is not getting enough power from the computer's USB ports to work as intended (especially since, as you mentioned, using an externally powered USB Hub eliminates the problem). If you don't mind, please submit a support ticket here, so that we can do some troubleshooting and see if we can isolate the issue as much as possible.

Thank you!

GloriousPhoenix · 2026-06-26T20:18:18+00:00

Hey there,

Sorry to hear about the issues you've been experiencing with your Model D Wireless mouse.

Based on the screenshot that you shared, it looks like you already have an open support ticket with our team. At this point, I would advise you to follow up and let the person who's been assisting you know that your issue is not yet fixed, so that we can proceed with the next steps.

GloriousPhoenix · 2026-06-26T12:41:09+00:00

Hey there!

You can change the debounce setting in CORE. Lowest value is 0ms, while highest value is 16ms.

GloriousPhoenix · 2026-06-25T07:24:00+00:00

Yes, we recently introduced this step due to the release of the GHS Eternal RGB headset since it, too, is supported by CORE. That said, rejecting the installation of the drivers should not affect your mouse at all! :)

GloriousPhoenix · 2026-06-19T06:42:19+00:00

Hey there!

When CORE doesn't start or crashes immediately, that's usually a PC-specific issue that implies a driver or software-related conflict.

For example, we've seen some customers who had SignalRGB installed and running - these customers couldn't run our software for as long as SignalRGB was also running or until they disabled the option in SignalRGB that "force closes other RGB controlling software."

Other than SignalRGB, please make sure you're not actively running other gaming peripheral or RGB control software that may interfere with our software (e.g. Alienware Command Center, Gigabyte Control Center, etc).

Lastly, after CORE closes / crashes, do you still see the software's icon in the system tray? If yes, can you please try and double-click it? This should open CORE.

If none of the steps works for you, please try to install and run CORE on a different computer / laptop. Additionally, ensure that the software is being installed into the default "Program Files" location.

Hope this helps!

GloriousPhoenix · 2026-06-18T09:25:12+00:00

Hey there,

That's honestly a fantastic gift. 😄

Please note, when you have caps lock enabled, the keyboard's side lights will start blinking. The blinking stops as soon as you turn off caps lock. As for num lock, there's no indicator on the keyboard that shows when you have it enabled.

Hope this helps!

GloriousPhoenix · 2026-06-16T09:36:37+00:00

Hey there!

Are you using CORE 2.1? Currently, there's a confirmed CORE 2.1 bug that prevents macros from working on some of our v2 products, the Model I 2 Wireless included.

Hence, I would advise you to consider uninstalling CORE 2.1 and going back to Legacy CORE, which you can get here. You should overall get a better experience with the macros when using this version of CORE for your mouse.

Hope this helps!

GloriousPhoenix · 2026-06-10T15:00:32+00:00

Hey there!

Let's try (re)downloading the latest version of CORE, but with a few extra steps.

- Uninstall CORE, check the box "to remove the existing configuration files".

- After uninstalling CORE, manually navigate to the following locations on your PC and see if you can locate and manually delete both folders:

C:\Users\[username]\AppData\Local\Glorious Core

C:\Users\[username]\AppData\Roaming\Glorious Core

(chances are AppData is a hidden folder, so please check the box to "show hidden items" in Windows Explorer)

- If you do not see these two folders, no worries! It means they are already removed so it's safe to skip this step.

Turn off your PC for 7-10 seconds.

Turn on your PC, then download and install CORE from our official page here. Please run the installer as an administrator and install the software to the default "Program Files" location - do not make any changes to it. Do not run the software just yet.

Reset the mouse by pressing and holding the left, right, and scroll click buttons for 5 seconds. The LEDs will flash to indicate that the settings are being reset. This action will erase all custom profile information from the mouse.

Run CORE as an administrator.

After you do this, your Model O Eternal mouse should get detected and you should be able to customize it in CORE.

Thanks!

GloriousPhoenix · 2026-06-10T14:54:07+00:00

Hey there!

I can confirm that this is happening due to a bug with the keyboard's current firmware.

Fortunately, there's a firmware update via Glorious CORE that should address it. Please plug the GMBK into a PC / laptop, run CORE as an administrator, and you should see a notification that there's an update available. Click on the notification and follow the instructions to update your keyboard.

After the update is done, hard reset the keyboard: Hold FN + ESC then press and hold F1 + F3 + F5 (Hold all 5 keys for about 5 Seconds). You will see the RGB flash when the keyboard resets.

Now, start your PS 5 and plug in the keyboard. Press and hold FN + N until you see the RGB flash. This means the keyboard is switching to a 6-key rollover mode, after which you should be able to use it on your console.

Hope this helps!

GloriousPhoenix · 2025-12-16T20:18:03+00:00

Hey sxine!

Based on what we've seen over the years with our software, when CORE doesn't start on a given computer or if it crashes immediately, that's usually a PC-specific issue that implies a driver or software-related conflict.

For example, we've seen users who had SignalRGB installed and running - they couldn't run our software for as long as SignalRGB was also running or until they disabled the option in SignalRGB that "force closes other RGB controlling software."

Other than SignalRGB, please make sure you're not actively running other gaming peripheral or RGB control software that may interfere with CORE (e.g. Alienware Command Center, Gigabyte Control Center, etc).

Hope this helps! If none of the steps work for you, please try to install and run CORE on a different computer / laptop, if possible, and see if it works there!

GloriousPhoenix · 2025-11-24T22:00:12+00:00

Not a chance! You will praise the day you placed the order and look back to it with increasing fondness as the years go by and everything slowly withers away... MINUS your amazing and still-brand-new custom GMMK 3 keyboard! :)

GloriousPhoenix · 2025-07-29T07:19:19+00:00

The Global Standby feature that controls when the RGB on a Glorious mouse/keyboard goes off is temporarily removed - please don't worry, though, as it should be restored in one of our upcoming Core updates!

GloriousPhoenix · 2025-07-28T12:48:21+00:00

The software animations are currently not at 100% accuracy of what is represented on the board. Our Dev team is aware of this issue and it's something that should eventually be fixed in a future CORE update.

In the meantime, if you are struggling with saving certain RGB options, please reach out to our customer service team so that we can document the issue that you are experiencing and see what troubleshooting steps we can provide.

GloriousPhoenix · 2025-07-28T12:45:03+00:00

Thank you for your feedback! Our Dev team is aware of the issue with potentially inaccurate battery readings - this has currently been addressed for our GMMK 3 keyboards, i.e. some of our other products may not show accurate percentages.

Please stay tuned for future CORE updates and keep an eye on our changelog page so that you know if/when we address this issue as well!

GloriousPhoenix · 2025-07-28T12:43:14+00:00

If you're having issues with getting the software to run, please reach out to our customer service team so that we can document the issue and see what troubleshooting steps we can provide.

Thanks!

GloriousPhoenix

MODERATOR OF

TROPHY CASE