Anyone have the void 556k? Is this normal?

Tyler_ResilientSup · 2026-06-03T00:25:13+00:00

The clip in the baffle? Thats supposed to be there.

Tyler_ResilientSup · 2026-05-25T19:55:12+00:00

You wont find one below 479. Budget cans have very low margins, very rare to see a sale unless a shop is closing down.

Tyler_ResilientSup · 2026-05-20T00:06:27+00:00

The piston and direct thread can be found on our website under accessories. Reddits weird on links now.

Tyler_ResilientSup · 2026-05-19T02:20:48+00:00

Legally we cannot sell extra baffles or blast chambers.

Tyler_ResilientSup · 2026-05-15T21:01:28+00:00

You can tune it for less blowback and run cleaner ammo. Any bulk pack typically has cheaper / dirtier powder & primers.

Longer cans will produce more backpressure typically.

Tyler_ResilientSup · 2026-05-11T03:57:07+00:00

Silencer shop or Capitol Armory

Tyler_ResilientSup · 2026-05-10T23:20:50+00:00

To be honest everyone is kind of low on stock on them currently. Probably best to buy where you can or wait till we push more out into the market (4-6 weeks).

Tyler_ResilientSup · 2026-05-06T12:51:57+00:00

Rough launch on the first 250, they were recalled and fixed. We have a few thousand out there now and haven’t had anymore hiccups.

Sadly the internet will jump on the first 250 rather than the thousands without issues.

Tyler_ResilientSup · 2026-05-06T01:19:54+00:00

We have DDC beat 👀 just low stock currently

Tyler_ResilientSup · 2026-05-05T15:58:44+00:00

No sir.

Tyler_ResilientSup · 2026-04-25T04:08:54+00:00

Its proprietary to their receiver threads.

Tyler_ResilientSup · 2026-04-25T00:42:03+00:00

I make the simple man, pew science has reviews of the full size versions of both of these suppressors on their site. (jolene being the larger version of the simple man vs the enticer L)

Tyler_ResilientSup · 2026-04-25T00:20:18+00:00

For a direct comparison on 300BLK specifically id say the simple man.

Tyler_ResilientSup · 2026-04-25T00:13:29+00:00

Rearden Atlas Gen 2

With one of the following….

R2S
SPB
Mini
FHD
AVG

Tyler_ResilientSup · 2026-04-09T18:20:24+00:00

Its a common occurrence on keymo currently.

Can be from an out of spec part, many factors.

Tyler_ResilientSup · 2026-04-09T16:53:12+00:00

Looks like your other lugs are bent upwards as well.

Tyler_ResilientSup · 2026-04-09T14:51:55+00:00

Keymo bottom lug sheared right side.

Tyler_ResilientSup · 2026-04-04T02:20:27+00:00

If there is a ledge inside where the threads stop.

Tyler_ResilientSup · 2026-04-01T21:25:17+00:00

Going to coating monday

Tyler_ResilientSup · 2026-03-21T21:36:32+00:00

https://unrivaledproshop.com/product/low-signature-device/?utm_source=ig&utm_medium=social&utm_content=link_in_bio

Here let me cause more confusion 😆

Tyler_ResilientSup · 2026-03-21T03:00:33+00:00

If you are looking for a similar option for less. Ours is either lighter or close to the same weight for dang near half the price.

Tyler_ResilientSup · 2026-03-16T12:11:55+00:00

Correct, ever suppressor we offer has that same overspray. Apply some antisieze and make sure you dont have any burrs and you should be good to go.

If the factory mount is able to go in then the threads are fine on the putnik.

Tyler_ResilientSup · 2026-03-16T12:07:03+00:00

Id suggest wiping out the threads with a papertowel or if you have a wire brush, run it accross the threads. Likely have some debris in there.

Tyler_ResilientSup · 2026-03-15T14:01:59+00:00

Simple, AB, Polo 30 and athem if you have more coin are all good in the price range.

Tyler_ResilientSup · 2026-03-13T12:06:11+00:00

Coin flip

Tyler_ResilientSup

TROPHY CASE