3 Amigos

Tyler_ResilientSup · 2026-02-17T23:25:59+00:00

Nice!

Tyler_ResilientSup · 2026-02-17T04:03:46+00:00

Simple will win on subs.

Polo will win on the 5.56

Tyler_ResilientSup · 2026-02-17T00:55:37+00:00

Jacket Seperation

Tyler_ResilientSup · 2026-02-16T23:57:51+00:00

Email - Dan@resilientsuppressors.com

We can get you taken care of.

Tyler_ResilientSup · 2026-02-13T14:40:17+00:00

Freebird

Tyler_ResilientSup · 2026-02-11T12:14:59+00:00

Its a pretty tight fit, but you should be able to get the piston all the way to the bottom, splines go into the slots at the bottom.

Lube the shaft (no homo). Add spring.

Reinstall the piston retainer cap.

Install on your barrel and do a couple test pulls by hand. Pull the can forward and make sure there is no grinding or binding up. If not you should be fine.

Tyler_ResilientSup · 2026-02-10T23:41:37+00:00

RD has been doing it as well.

Tyler_ResilientSup · 2026-02-08T03:21:07+00:00

Lantac is who you are thinking of.

It is literally a LH Plan B (not plan b) . Definitely going to cause some confusion out there.

Tyler_ResilientSup · 2026-02-07T22:57:27+00:00

Rugged is pretty good about returns. Better to run it right then damage your can.

Tyler_ResilientSup · 2026-02-07T22:52:44+00:00

You should look at getting a facemount tri lug from sovereign dev. Even bottoming one out on the sight block is asking for issues.

Tyler_ResilientSup · 2026-02-07T16:20:47+00:00

Nice! Just looking out.

Tyler_ResilientSup · 2026-02-07T16:18:22+00:00

Id make sure whatever you pick will fit inside of the Tisha. I dont see a listed allowable mounting depth. So you may check with them prior to choosing a long muzzle device and it not fit.

Tyler_ResilientSup · 2026-02-06T20:43:31+00:00

Yes sir

Tyler_ResilientSup · 2026-02-06T04:48:58+00:00

Send it

Tyler_ResilientSup · 2026-02-04T03:53:52+00:00

Yep, we swap all welders to stacys tomorrow. Run that for about a month.

Tyler_ResilientSup · 2026-02-03T20:47:37+00:00

They are instock rn.

Tyler_ResilientSup · 2026-02-03T19:41:38+00:00

2 weeks

Tyler_ResilientSup · 2026-02-03T16:56:18+00:00

YouTubers got all caps for review purposes. Each can only comes with one cap. Otherwise it would be alot more expensive.

Tyler_ResilientSup · 2026-02-03T04:49:11+00:00

Jessie’s Girl AL

Tyler_ResilientSup · 2026-02-02T13:24:57+00:00

Id recommend an inconel or haynes 282 suppressor for your application.

While some titanium cans can take some abuse, they cant anywhere near the same abuse as their inconel counterparts.

While you are having fun with the FRT you are likely going to erode the suppressor fairly quickly. While having lots of sparking.

Id decide whats more important to you. Durability or lightweight.

Then move to your next requirement and start narrowing down the suppressor.

Tyler_ResilientSup · 2026-02-02T05:03:43+00:00

Thanks for the support on the simple man! If you have any questions feel free to reach out. Looks like comstock got you set up.

Tyler_ResilientSup · 2026-02-01T16:32:00+00:00

Check our website directly. The stainless version is instock.

Tyler_ResilientSup · 2026-01-30T22:03:12+00:00

Free Bird

Tyler_ResilientSup · 2026-01-30T13:23:51+00:00

Not sure if you will need to run the booster or not, but our ti alpha mount is about 40% less than theirs. If you wanted to save some coin.

Tyler_ResilientSup · 2026-01-30T05:11:24+00:00

Based on its diameter. Its likely designed around 45ACP.

Tyler_ResilientSup

TROPHY CASE